|
Re: ASL to YSF Question
thanks Adrian, noted.
By
Eric-K6KWB
·
#5742
·
|
|
Re: ASL to YSF Question
mmdvm_bridge.ini
I use ;
[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=0
GatewayAddress= ip or dns of your YSFreflector
GatewayPort=42000 port of your reflector
Debug=0
mmdvm_bridge.ini
I use ;
[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=0
GatewayAddress= ip or dns of your YSFreflector
GatewayPort=42000 port of your reflector
Debug=0
|
By
Adrian Fewster <vk4tux@...>
·
#5741
·
|
|
Re: ASL to YSF Question
Hello Tito,
you can try this:
mmdvm_bridge.ini
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress= ip or dns of your YSFreflector
GatewayPort=42000 port of your
Hello Tito,
you can try this:
mmdvm_bridge.ini
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress= ip or dns of your YSFreflector
GatewayPort=42000 port of your
|
By
Eric-K6KWB
·
#5740
·
|
|
Re: Image needed
Hi Brett,
For ASL - http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/
install asl image first then download DVSwitch system builder.
For DVSwitch -
Hi Brett,
For ASL - http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/
install asl image first then download DVSwitch system builder.
For DVSwitch -
|
By
Eric-K6KWB
·
#5739
·
|
|
ASL to YSF Question
Hello Folks, I have a question...
I have two VMs on two different hosts.
One One I am running ASL<->YFSN
on the other I am running a YSF Reflector.
What I would like to do is connect the ASL-YSFN to
Hello Folks, I have a question...
I have two VMs on two different hosts.
One One I am running ASL<->YFSN
on the other I am running a YSF Reflector.
What I would like to do is connect the ASL-YSFN to
|
By
Tito Lopez - YN1OB
·
#5738
·
|
|
Image needed
DV switch friends, I just upgraded from x86 CentOS to a PI 3. I installed hamviop however I want to have ALLstar/Echolink/DMR/Yeasu on one pi. Friend who is helping me install the bridges said to
DV switch friends, I just upgraded from x86 CentOS to a PI 3. I installed hamviop however I want to have ALLstar/Echolink/DMR/Yeasu on one pi. Friend who is helping me install the bridges said to
|
By
Brett KB5YZB
·
#5737
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
You CAN, but if you configure Analog_Bridge for YSF that is how it will startup. After that lets say you want to change reflectors, there is where dvswitch.sh would come in. Another example
You CAN, but if you configure Analog_Bridge for YSF that is how it will startup. After that lets say you want to change reflectors, there is where dvswitch.sh would come in. Another example
|
By
Steve N4IRS
·
#5736
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
Thanks Steve,
Does that mean I can insert a startup macro for the USRP node via rpt.conf so it will run dvswitch.sh in YSF mode?
73,
Geoffrey VE6GCD
Thanks Steve,
Does that mean I can insert a startup macro for the USRP node via rpt.conf so it will run dvswitch.sh in YSF mode?
73,
Geoffrey VE6GCD
|
By
ve6gcd@...
·
#5735
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
No it does not. dvswitch.sh is used to send commands to a running AB. You can run it with ./dvswitch.sh to see the list of available commands. dvswitch.sh can be used in scripts or ASL
No it does not. dvswitch.sh is used to send commands to a running AB. You can run it with ./dvswitch.sh to see the list of available commands. dvswitch.sh can be used in scripts or ASL
|
By
Steve N4IRS
·
#5734
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
Hi Steve,
Just one more question before the reinstall, does Analog_Bridge run dvswitch.sh automatically at startup?
73,
Geoffrey VE6GCD
Hi Steve,
Just one more question before the reinstall, does Analog_Bridge run dvswitch.sh automatically at startup?
73,
Geoffrey VE6GCD
|
By
ve6gcd@...
·
#5733
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
I really have to update the system builder script.
Here are a few things you should do.
We post the latest code for the DVSwitch programs in github before the make it to the apt
I really have to update the system builder script.
Here are a few things you should do.
We post the latest code for the DVSwitch programs in github before the make it to the apt
|
By
Steve N4IRS
·
#5732
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
Hi Steve,
Analog_Bridge in my computer was installed using DVSwitch-System-Builder.
Do I need to set anything under the MACROS section (to set the mode)? Anyway, below is the config of my
Hi Steve,
Analog_Bridge in my computer was installed using DVSwitch-System-Builder.
Do I need to set anything under the MACROS section (to set the mode)? Anyway, below is the config of my
|
By
ve6gcd@...
·
#5731
·
|
|
Re: ASL Briddge to YSF/FCS
#analog_bridge
Geoffrey,
Can you post your Analog_Bridge.ini so we can start there?
Steve N4IRS
Geoffrey,
Can you post your Analog_Bridge.ini so we can start there?
Steve N4IRS
|
By
Steve N4IRS
·
#5730
·
|
|
ASL Briddge to YSF/FCS
#analog_bridge
Happy New Year Everyone,
I am trying to bridge ASL directly to YSF/FCS. We are trying to avoid conflict with Brandmeister requirements at the moment which is why we are considering to bridge ASL and
Happy New Year Everyone,
I am trying to bridge ASL directly to YSF/FCS. We are trying to avoid conflict with Brandmeister requirements at the moment which is why we are considering to bridge ASL and
|
By
ve6gcd@...
·
#5729
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
Hi Steve,
Can you tell me how to configure ASL direct bridge to YSF we are currently avoiding conflict with DMR/Brandmeister regulations at the moment. I tried it and keeps noticing in the debug that
Hi Steve,
Can you tell me how to configure ASL direct bridge to YSF we are currently avoiding conflict with DMR/Brandmeister regulations at the moment. I tried it and keeps noticing in the debug that
|
By
ve6gcd@...
·
#5728
·
|
|
Re: Need help getting DV Switch to change DMR Talk Groups
#analog_bridge
Yes, Thanks for responding Steve. Yes, running DVSwitch on Raspberry Pi bridge between DMR and AllStar. I had set static TG 315136 set on BrandMeister and change it to static TG 315135. BrandMeister
Yes, Thanks for responding Steve. Yes, running DVSwitch on Raspberry Pi bridge between DMR and AllStar. I had set static TG 315136 set on BrandMeister and change it to static TG 315135. BrandMeister
|
By
Ted Lawrence
·
#5727
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Thanks Adrian and everyone that helped me find where to change language to english. Turns out there are 4 locations that had the file I needed to modify. Three were just extras that had been saved in
Thanks Adrian and everyone that helped me find where to change language to english. Turns out there are 4 locations that had the file I needed to modify. Three were just extras that had been saved in
|
By
Ken, K6EFJ
·
#5726
·
|
|
Re: Hytera DMR Gateway
Hi Joaquin, I don't have one raspberry 3 (it is too old) but only one
raspberry 3+ that doesn't run debian Jessie.
Do you have the source code of the hytera gw mmdvm software?
I'm sorry but I don't
Hi Joaquin, I don't have one raspberry 3 (it is too old) but only one
raspberry 3+ that doesn't run debian Jessie.
Do you have the source code of the hytera gw mmdvm software?
I'm sorry but I don't
|
By
Marco IW0RED
·
#5725
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Looks like these came from the redundant DL5DI Opendv repository, instead of G4KLX repository then.
Those long paths there, adding the opendv user from previous wx2.8 version were
Looks like these came from the redundant DL5DI Opendv repository, instead of G4KLX repository then.
Those long paths there, adding the opendv user from previous wx2.8 version were
|
By
Adrian Fewster <vk4tux@...>
·
#5724
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Maybe someone will need this description to configure ircddbgateway
http://www.dvmega.co.uk/manual/ircDDBGateway-ENG.pdf
Merry Christmas
Maybe someone will need this description to configure ircddbgateway
http://www.dvmega.co.uk/manual/ircDDBGateway-ENG.pdf
Merry Christmas
|
By
SP2ONG Waldek
·
#5723
·
|