|
Re: Time Slot separate networks?
That’s all trivially done in your rules file, that is what defines what TG gots to what TS and to / from what system.
Sent from the iRoad
That’s all trivially done in your rules file, that is what defines what TG gots to what TS and to / from what system.
Sent from the iRoad
|
By
JJ Cummings
·
#6017
·
|
|
Time Slot separate networks?
Home brew DMR repeater.
Is it possible to change the network based on time slot?
For example, I would like TS1 to be connected to my HBLINK server to host all of the local DMR repeaters, and TS2 to
Home brew DMR repeater.
Is it possible to change the network based on time slot?
For example, I would like TS1 to be connected to my HBLINK server to host all of the local DMR repeaters, and TS2 to
|
By
Skyler Fennell
·
#6016
·
|
|
Re: Problems with MMDVM_Bridge timing out
Here is my working samples, hope its help. Do you have any log to start with?
You should have a latest version of MB to connect to XLX:
https://github.com/DVSwitch/MMDVM_Bridge/tree/master/bin
log
Here is my working samples, hope its help. Do you have any log to start with?
You should have a latest version of MB to connect to XLX:
https://github.com/DVSwitch/MMDVM_Bridge/tree/master/bin
log
|
By
Eric-K6KWB
·
#6015
·
|
|
Re: all star
do you have a allstar node #?
do you have a allstar node #?
|
By
Brad N8PC
·
#6014
·
|
|
Re: Problems with MMDVM_Bridge timing out
Local ports should be different.
Sent from my Samsung Galaxy smartphone.
Local ports should be different.
Sent from my Samsung Galaxy smartphone.
|
By
Ernie Gm7kbk
·
#6013
·
|
|
Problems with MMDVM_Bridge timing out
So I have installed two instances of MMDVM_Bridge to acheive and XLX to DMR Bridge but I am having stability problems. Here is is the layout.
XLXd ->MMDVM_Bridge-XLX->MMDVM_Bridge-BM->Brandmeister.
So I have installed two instances of MMDVM_Bridge to acheive and XLX to DMR Bridge but I am having stability problems. Here is is the layout.
XLXd ->MMDVM_Bridge-XLX->MMDVM_Bridge-BM->Brandmeister.
|
By
Bryan Jackson
·
#6012
·
|
|
all star
Hi I just install this on a raspberry pi
https://4x5mg.net/2018/07/16/allstar-to-dmr-bridge/
I can get ecolink to comet and and dmr but not all star and all so the bight from one to the
Hi I just install this on a raspberry pi
https://4x5mg.net/2018/07/16/allstar-to-dmr-bridge/
I can get ecolink to comet and and dmr but not all star and all so the bight from one to the
|
By
clayton
·
#6011
·
|
|
Re: Dvswitch app.. can not connect?
Charles,
If I understand the question you want to connect to 2 different nodes. I assume from the no computer comment, you do not have a node of your own. If I have this correct, you would
Charles,
If I understand the question you want to connect to 2 different nodes. I assume from the no computer comment, you do not have a node of your own. If I have this correct, you would
|
By
Steve N4IRS
·
#6010
·
|
|
Dvswitch app.. can not connect?
Is it possible to set up the dvswitch app on an android to link to a specific node (45685, 45882) without having a computer. I am a truck driver and only have a phone and a tablet. Can someone explain
Is it possible to set up the dvswitch app on an android to link to a specific node (45685, 45882) without having a computer. I am a truck driver and only have a phone and a tablet. Can someone explain
|
By
Charles Fraga <cfraga1978@...>
·
#6009
·
|
|
Re: BM to XLX via MMDVM_Bridge - Doc version 2.0
Hi Steve did you ever update the doc ? Looking at implement this solution whilst waiting for DM to create the XLX interlink. Basically I want to connect XLX070A to BM TG2345974. Any suggested
Hi Steve did you ever update the doc ? Looking at implement this solution whilst waiting for DM to create the XLX interlink. Basically I want to connect XLX070A to BM TG2345974. Any suggested
|
By
Bryan Jackson
·
#6008
·
|
|
Re: dash board
The other guy said that he was a problem with the software. I had to take it off wait until the new. Update cuz I wasn't being able to communicate on the dmr or anything else.
Sent from my T-Mobile
The other guy said that he was a problem with the software. I had to take it off wait until the new. Update cuz I wasn't being able to communicate on the dmr or anything else.
Sent from my T-Mobile
|
By
Raul cruz <rcw3023@...>
·
#6007
·
|
|
Re: dash board
I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1
I am having the same issue, I noticed this after reinstall from server crash. It was on PHP 7.3 when it happened. Upgrading to PHP 7.4 did not help either. Ran auto-refresh add-on in Chrome with 1
|
By
ve6gcd@...
·
#6006
·
|
|
Re: Documentation
Jay,
No, DMRGateway is not covered because most of the time it is not used.
As to your DMR not working, all I can say is check your configuration.
Steve N4IRS
Jay,
No, DMRGateway is not covered because most of the time it is not used.
As to your DMR not working, all I can say is check your configuration.
Steve N4IRS
|
By
Steve N4IRS
·
#6005
·
|
|
Re: Documentation
I discovered that the documentation does not cover the editing of DMRGateway.ini, nor does "systemctl enable dmrgateway" work. Maybe it is not supposed to. However DMR is not working on my image, so
I discovered that the documentation does not cover the editing of DMRGateway.ini, nor does "systemctl enable dmrgateway" work. Maybe it is not supposed to. However DMR is not working on my image, so
|
By
Jay
·
#6004
·
|
|
dash board
hi having problems with dvswitch the dash board was working fine it was showing who was connected all the connections with my dmr id.########
but some how now is only showing this lines only. am I
hi having problems with dvswitch the dash board was working fine it was showing who was connected all the connections with my dmr id.########
but some how now is only showing this lines only. am I
|
By
Raul cruz <rcw3023@...>
·
#6003
·
|
|
Documentation
What a great job. I just ran through the whole process. I only had one glitch. the collectProcessDataFiles gave me an ASL node list not valid. Not a big deal but I was not expecting that.
My next
What a great job. I just ran through the whole process. I only had one glitch. the collectProcessDataFiles gave me an ASL node list not valid. Not a big deal but I was not expecting that.
My next
|
By
Jay
·
#6002
·
|
|
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room
For now we are using a hotspot connected to a ysf reflector and a wiresx node running in simplex and low power dummy load to join them.
For now we are using a hotspot connected to a ysf reflector and a wiresx node running in simplex and low power dummy load to join them.
|
By
David
·
#6001
·
|
|
Re: Access to a Fusion FCS room
#dmrlink
As of today, MMDVM_Bridge can not directly connect to a FCS room. You would have to use YSFGateway and set the startup to the FCS room you want to connect to. Then steer MB to your YSFGateway.
Steve
As of today, MMDVM_Bridge can not directly connect to a FCS room. You would have to use YSFGateway and set the startup to the FCS room you want to connect to. Then steer MB to your YSFGateway.
Steve
|
By
Steve N4IRS
·
#5999
·
|
|
Re: Access to a Fusion FCS room
#dmrlink
I'm interested in this too. 🙂
I'm interested in this too. 🙂
|
By
Russell, KV4S
·
#5998
·
|
|
Re: need to find a way to link hblink or ysf or mmdvmbridge to wires x room
Hello Gary
You can use Xlx or Hblink without BM.
If connecting ysf to dmr you loose gps. Most people have dmr ids.
Ernie
Get Outlook for Android
Hello Gary
You can use Xlx or Hblink without BM.
If connecting ysf to dmr you loose gps. Most people have dmr ids.
Ernie
Get Outlook for Android
|
By
Ernie Gm7kbk
·
#5997
·
|