|
Re: AMBE GPIO board
#analog_bridge
Steve,
I didn't know about parameter very well for AMBEtest4.py. The result was without parameter. This time I tried with "AMBEtest4.py -e -v -n" and the baudrate was 460800 but it still doesn't
Steve,
I didn't know about parameter very well for AMBEtest4.py. The result was without parameter. This time I tried with "AMBEtest4.py -e -v -n" and the baudrate was 460800 but it still doesn't
|
By
HL5KY
·
#6044
·
|
|
Re: First release of USRP Client (pyUC)
I just caught a glitch: Transmit is disabled after double clicking the Transmit Button twice right after opening the app.
I just caught a glitch: Transmit is disabled after double clicking the Transmit Button twice right after opening the app.
|
By
ve6gcd@...
·
#6043
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
OK like this gentleman I too am having issues
it seems my node is communicating with brandmesiter & echolink, both are connected & reporting
all the test steps along the process were verified as
OK like this gentleman I too am having issues
it seems my node is communicating with brandmesiter & echolink, both are connected & reporting
all the test steps along the process were verified as
|
By
MIKE Parie <aa1pr@...>
·
#6042
·
|
|
Re: First release of USRP Client (pyUC)
Thanks Steve,
This is interesting, might also try pursuing this route. I will reconfugure rpt.conf as advised and let you know.
73,
Geoffrey VE6GCD
Thanks Steve,
This is interesting, might also try pursuing this route. I will reconfugure rpt.conf as advised and let you know.
73,
Geoffrey VE6GCD
|
By
ve6gcd@...
·
#6041
·
|
|
Re: First release of USRP Client (pyUC)
Sorry for the delay, it took me a bit to figure out what I think is your issue.
In rpt.conf for the node you are connecting to via USRP you have something like this:
rxchannel =
Sorry for the delay, it took me a bit to figure out what I think is your issue.
In rpt.conf for the node you are connecting to via USRP you have something like this:
rxchannel =
|
By
Steve N4IRS
·
#6040
·
|
|
Re: AMBE GPIO board
#analog_bridge
2020년 2월 27일 (목) 19:54, Steve N4IRS <szingman@...>님이 작성:
2020년 2월 27일 (목) 19:54, Steve N4IRS <szingman@...>님이 작성:
|
By
Kevin Ku
·
#6039
·
|
|
Re: AMBE GPIO board
#analog_bridge
Joe,
Analog_Bridge does support a Pi-Hat type of DV3000. Both Mike and a regularly run the NWDigital Pi-Hat DV3000. What parameter are you using to run AMBEtest4.py? It should be
Joe,
Analog_Bridge does support a Pi-Hat type of DV3000. Both Mike and a regularly run the NWDigital Pi-Hat DV3000. What parameter are you using to run AMBEtest4.py? It should be
|
By
Steve N4IRS
·
#6038
·
|
|
AMBE GPIO board
#analog_bridge
Thank you for the great work of DVSwitch. I am trying to hook up my AMBE GPIO board which was made in Japan and similar to DV3000 GPIO board. It was working ok for AMBE server on RPI3B+ with the
Thank you for the great work of DVSwitch. I am trying to hook up my AMBE GPIO board which was made in Japan and similar to DV3000 GPIO board. It was working ok for AMBE server on RPI3B+ with the
|
By
HL5KY
·
#6037
·
|
|
Re: What DMR ID's?
#analog_bridge
Thanks Steve, well this is the idea hopefully we can make it work:
I built two repeaters for our Mexican radio club, both in the same rack on a mountain top, one is using a Rasperry Pi 4 running
Thanks Steve, well this is the idea hopefully we can make it work:
I built two repeaters for our Mexican radio club, both in the same rack on a mountain top, one is using a Rasperry Pi 4 running
|
By
Alejandro Pereida
·
#6036
·
|
|
Re: What DMR ID's?
#analog_bridge
Alex,
The gatewayDmrId is the ID sent by Analog_Bridge if it has no other choice. Depending on how you are using Analog_Bridge, it may never be used.
Hope this helps,
73,
Alex,
The gatewayDmrId is the ID sent by Analog_Bridge if it has no other choice. Depending on how you are using Analog_Bridge, it may never be used.
Hope this helps,
73,
|
By
Steve N4IRS
·
#6034
·
|
|
What DMR ID's?
#analog_bridge
Hello, in the Analog_Bridge.ini file under [AMBE AUDIO] and for the parameters:
gatewayDmrId = xxxxxx ; ID to use when transmitting from Analog_Bridge
repeaterID = 3342045
Hello, in the Analog_Bridge.ini file under [AMBE AUDIO] and for the parameters:
gatewayDmrId = xxxxxx ; ID to use when transmitting from Analog_Bridge
repeaterID = 3342045
|
By
Alejandro Pereida
·
#6033
·
|
|
Re: First release of USRP Client (pyUC)
Thanks Steve,
I will try to play with it and see how I can use it to interface ASL and S-COM 7330.
73,
Geoffrey VE6GCD
Thanks Steve,
I will try to play with it and see how I can use it to interface ASL and S-COM 7330.
73,
Geoffrey VE6GCD
|
By
ve6gcd@...
·
#6032
·
|
|
Re: DVSwitch Server Dying once a day
Jay,
We are looking at a possible cause / solution.
Steve
Jay,
We are looking at a possible cause / solution.
Steve
|
By
Steve N4IRS
·
#6031
·
|
|
Re: First release of USRP Client (pyUC)
Geoff,
You can leave the default server alone, it will not be used when connecting to ASL.
Set aslMode=1
Setup you ASL node using the USRP channel driver. Set the ports to the same
Geoff,
You can leave the default server alone, it will not be used when connecting to ASL.
Set aslMode=1
Setup you ASL node using the USRP channel driver. Set the ports to the same
|
By
Steve N4IRS
·
#6030
·
|
|
Re: First release of USRP Client (pyUC)
Hi Steve,
Can you tell me how to set this up for ASL USRP node?
The downloaded pyUC.ini file has
defaultServer=DMR.
aslMode=0
For AllStarLink Do I need to set defaultServer to blank, while
Hi Steve,
Can you tell me how to set this up for ASL USRP node?
The downloaded pyUC.ini file has
defaultServer=DMR.
aslMode=0
For AllStarLink Do I need to set defaultServer to blank, while
|
By
ve6gcd@...
·
#6029
·
|
|
DVSwitch Server Dying once a day
Maybe someone has a solution. I have Raspberry Pi 3 with DVSwitch built from the most current instructions. It works great but sometime overnight, every night, the device becomes unreachable. By
Maybe someone has a solution. I have Raspberry Pi 3 with DVSwitch built from the most current instructions. It works great but sometime overnight, every night, the device becomes unreachable. By
|
By
Jay
·
#6028
·
|
|
YSF to DMR setup with hang time
#mmdvm_bridge
Hi,
I would like to setup MMDVM_Bridge where FCS room can comminicate with a Brandmeister Talkgroup. Due to the loop ban processing in BM, I would like to set it up such that DMR will have minimum of
Hi,
I would like to setup MMDVM_Bridge where FCS room can comminicate with a Brandmeister Talkgroup. Due to the loop ban processing in BM, I would like to set it up such that DMR will have minimum of
|
By
ve6gcd@...
·
#6027
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
What error do you get?
By
Steve N4IRS
·
#6026
·
|
|
Re: alll star help
do you have your port forwarding open for echolink set in your router? EchoLink requires that your router or firewall allow inbound and outbound UDP to ports 5198 and 5199, and
do you have your port forwarding open for echolink set in your router? EchoLink requires that your router or firewall allow inbound and outbound UDP to ports 5198 and 5199, and
|
By
Brad NK8J <bradnk8j@...>
·
#6025
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
Hi Steve.I use linux deploy apk on my android phone and i run debian in chroot.I have installed dvswitch...analog_bridge-md380-emu-mmdvm_bridge and connect to ipsc2 romania(DMR+).I have one
Hi Steve.I use linux deploy apk on my android phone and i run debian in chroot.I have installed dvswitch...analog_bridge-md380-emu-mmdvm_bridge and connect to ipsc2 romania(DMR+).I have one
|
By
yo2lqa@...
·
#6024
·
|