|
Re: Port errors ASL to DMR
I have done those tests and it says that mmdvm_bridge is connected.
--
Sent from my Android phone with mail.com Mail.
I have done those tests and it says that mmdvm_bridge is connected.
--
Sent from my Android phone with mail.com Mail.
|
By
Sean Burton
·
#6240
·
|
|
Re: Port errors ASL to DMR
Sean,
This happens when another program is listening to 31103. Here are the commands you want to run to find out what is listening on 31103:
As root (sudo -s)
netstat -unap | grep
Sean,
This happens when another program is listening to 31103. Here are the commands you want to run to find out what is listening on 31103:
As root (sudo -s)
netstat -unap | grep
|
By
Steve N4IRS
·
#6239
·
|
|
Port errors ASL to DMR
I have set up an ASL to DMR bridge but I can't get it to work due to an error where it tells me it cannot connect to port 31103. I've run the checks and I can't find anything else connected to that
I have set up an ASL to DMR bridge but I can't get it to work due to an error where it tells me it cannot connect to port 31103. I've run the checks and I can't find anything else connected to that
|
By
Sean Burton
·
#6238
·
|
|
Re: Talkgroup Announcement
I ran audacity to make my announcements on my analog repeater& the audio codec is ULAW..Never did it for digital
Pete
KD2ARB
I ran audacity to make my announcements on my analog repeater& the audio codec is ULAW..Never did it for digital
Pete
KD2ARB
|
By
Pete Fierro <overthetop52@...>
·
#6237
·
|
|
Re: Talkgroup Announcement
Yes, I have one standalone non published reflector that only runs the reflector software.
We also have a reflector with the gateway software so that one should be easy as soon as I figure out how to
Yes, I have one standalone non published reflector that only runs the reflector software.
We also have a reflector with the gateway software so that one should be easy as soon as I figure out how to
|
By
Jeff Carrier
·
#6236
·
|
|
Re: Talkgroup Announcement
I'm not sure I understand the question. P25Gateway announces to the user every time it connects or disconnects from a reflector. Do you mean my standalone, a non published reflector?
I'm not sure I understand the question. P25Gateway announces to the user every time it connects or disconnects from a reflector. Do you mean my standalone, a non published reflector?
|
By
Steve N4IRS
·
#6235
·
|
|
Re: Talkgroup Announcement
Thanks Steve,
So even with a standalone P25Reflector I'd need to run P25Gateway to get an announcement I'm assuming?
Thanks Steve,
So even with a standalone P25Reflector I'd need to run P25Gateway to get an announcement I'm assuming?
|
By
Jeff Carrier
·
#6234
·
|
|
Re: Talkgroup Announcement
It is generated by the P25Gateway.
It is generated by the P25Gateway.
|
By
Steve N4IRS
·
#6233
·
|
|
Re: Talkgroup Announcement
P25 reflector
Sent from Outlook Mobile
P25 reflector
Sent from Outlook Mobile
|
By
Kyle Robinson <K4KTR@...>
·
#6232
·
|
|
Talkgroup Announcement
Does anyone know where the talkgroup announcement (i.e. "North America" or "World Wide") comes from? Is that generated by Pi-star or by P25Reflector? I've searched the board and didn't find any
Does anyone know where the talkgroup announcement (i.e. "North America" or "World Wide") comes from? Is that generated by Pi-star or by P25Reflector? I've searched the board and didn't find any
|
By
Jeff Carrier
·
#6231
·
|
|
Re: MMDVM to ASL bridge
#mmdvm_bridge
JJ,
Thanks for that. I’ll be back at the office in the morning and will give that a try.
JJ,
Thanks for that. I’ll be back at the office in the morning and will give that a try.
|
By
john.brazel225@...
·
#6230
·
|
|
Re: MMDVM to ASL bridge
#mmdvm_bridge
John..
You need to change the gain type (if you havn't) from the default to AUDIO_USE_GAIN.. then the changes will work, make big changes at first and smaller as you get closer to an acceptable level.
John..
You need to change the gain type (if you havn't) from the default to AUDIO_USE_GAIN.. then the changes will work, make big changes at first and smaller as you get closer to an acceptable level.
|
By
JJ Cummings
·
#6229
·
|
|
Re: MMDVM to ASL bridge
#mmdvm_bridge
Steve,
Thays where I run into the issue of it not changing. I can alter those settings and the end result is still the same. The DMR side being way overdriven when there is traffic coming from asl. I
Steve,
Thays where I run into the issue of it not changing. I can alter those settings and the end result is still the same. The DMR side being way overdriven when there is traffic coming from asl. I
|
By
john.brazel225@...
·
#6228
·
|
|
Re: MMDVM to ASL bridge
#mmdvm_bridge
John,
In Analog_Bridge.ini see the [USRP] stanzas
tlvAudio = AUDIO_USE_GAIN
tlvGain = 0.35 ; Gain factor of audio from ASL (0.0-1.0)
This should reduce
John,
In Analog_Bridge.ini see the [USRP] stanzas
tlvAudio = AUDIO_USE_GAIN
tlvGain = 0.35 ; Gain factor of audio from ASL (0.0-1.0)
This should reduce
|
By
Steve N4IRS
·
#6227
·
|
|
MMDVM to ASL bridge
#mmdvm_bridge
I’m running ASL with mmdvm bridge installed. I have everything working pretty good, however, the audio level adjustments don’t seem to be helping me. Audio from DMR to asl (echolink) seems to be
I’m running ASL with mmdvm bridge installed. I have everything working pretty good, however, the audio level adjustments don’t seem to be helping me. Audio from DMR to asl (echolink) seems to be
|
By
john.brazel225@...
·
#6226
·
|
|
Re: Installing & setup of MMDVM_Bridge Analog_bridge to do allstarlink, d-star, dmr, p25 linking.
#mmdvm_bridge
#hblink
#analog_bridge
YES I am running Allstar on a Pi 4 now.
YES I am running Allstar on a Pi 4 now.
|
By
Brad N8PC
·
#6225
·
|
|
Installing & setup of MMDVM_Bridge Analog_bridge to do allstarlink, d-star, dmr, p25 linking.
#mmdvm_bridge
#hblink
#analog_bridge
Hi,
I would like install Allstarlink on a Raspberry Pi4.
Is it possible now ?
If yes, which image to use .
Thanks 73
Paul DELMELLE – ON6DP / OP0P
E-mail: on6dp@...
Visit also our UBA
Hi,
I would like install Allstarlink on a Raspberry Pi4.
Is it possible now ?
If yes, which image to use .
Thanks 73
Paul DELMELLE – ON6DP / OP0P
E-mail: on6dp@...
Visit also our UBA
|
By
Paul on6dp
·
#6224
·
|
|
Re: HBlink to Wires X Node
Openspot 2 wires-x to dmr. Will not work wires-x to ysf.
Get Outlook for Android
Openspot 2 wires-x to dmr. Will not work wires-x to ysf.
Get Outlook for Android
|
By
Ernie Gm7kbk
·
#6223
·
|
|
Re: HBlink to Wires X Node
Since last publication, anybody has found a solution to bridge Wires-X with DMR witout BM and APRS ?
Have a HBLINK server and would like like Wires-X Romm
73 Paul, ON6DP
Since last publication, anybody has found a solution to bridge Wires-X with DMR witout BM and APRS ?
Have a HBLINK server and would like like Wires-X Romm
73 Paul, ON6DP
|
By
Paul on6dp
·
#6222
·
|
|
Re: Installing & setup of MMDVM_Bridge Analog_bridge to do allstarlink, d-star, dmr, p25 linking.
#mmdvm_bridge
#hblink
#analog_bridge
I hate to disagree with you but YES it does run on ARCH Linux with HAMVOIP software. Try access DMR TG314651, Allstar 45743, Echolink 275408 or even better yet check out my dashboard and watch
I hate to disagree with you but YES it does run on ARCH Linux with HAMVOIP software. Try access DMR TG314651, Allstar 45743, Echolink 275408 or even better yet check out my dashboard and watch
|
By
Brad N8PC
·
#6221
·
|