|
Re: agile Allstar node from MMDVM
no cause once converted to digital sounds funny to analog and does not work.
no cause once converted to digital sounds funny to analog and does not work.
|
By
Brad N8PC
·
#6527
·
|
|
agile Allstar node from MMDVM
Hi:
I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other
Hi:
I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other
|
By
Patrick Perdue
·
#6526
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Forum keeps chopping my message, so I'm posting this separately:
MB_XLX
I: 2020-05-15 07:06:41.725 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT
I: 2020-05-15 07:06:48.212 MMDVM_Bridge:
I:
Forum keeps chopping my message, so I'm posting this separately:
MB_XLX
I: 2020-05-15 07:06:41.725 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT
I: 2020-05-15 07:06:48.212 MMDVM_Bridge:
I:
|
By
Rudy N6DOZ
·
#6523
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Steve, I apologize, I believe I did post the same log twice.
I'm going to try again and emulating you by only providing the important lines. Third time's a charm? :p
MB_BM
I: 2020-05-15 07:06:45.626
Steve, I apologize, I believe I did post the same log twice.
I'm going to try again and emulating you by only providing the important lines. Third time's a charm? :p
MB_BM
I: 2020-05-15 07:06:45.626
|
By
Rudy N6DOZ
·
#6522
·
Edited
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
I stripped these down to the important parts:
I bolded the important lines. In short:
Both instances of MB are transmitting on 32103
Both instances of MB are receiving on
I stripped these down to the important parts:
I bolded the important lines. In short:
Both instances of MB are transmitting on 32103
Both instances of MB are receiving on
|
By
Steve N4IRS
·
#6521
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
That sucks. I will add an export talkgroup in the future so you no longer need to run through dmrgateway just to adjust the destination.
That sucks. I will add an export talkgroup in the future so you no longer need to run through dmrgateway just to adjust the destination.
|
By
Mike Zingman - N4IRR
·
#6520
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Ernie,
So do you have your setup like this?
BM <-> DMRGateway <-> MB <-> MB <-> XLX?
I'll have to play with that setup.
Thanks for the tip. 7-3
Ernie,
So do you have your setup like this?
BM <-> DMRGateway <-> MB <-> MB <-> XLX?
I'll have to play with that setup.
Thanks for the tip. 7-3
|
By
Rudy N6DOZ
·
#6519
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
> netstat -unap
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
udp 0 0 45.77.186.5:62030 0.0.0.0:*
> netstat -unap
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
udp 0 0 45.77.186.5:62030 0.0.0.0:*
|
By
Rudy N6DOZ
·
#6518
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Eric,
I think you might have hit it on the head.
While I have Slot 1 disabled in both the MMDVM_bridge.ini, I have it chosen in the DVSwitch.ini.
I'll give it a try and see if it works.
Thank you.
Eric,
I think you might have hit it on the head.
While I have Slot 1 disabled in both the MMDVM_bridge.ini, I have it chosen in the DVSwitch.ini.
I'll give it a try and see if it works.
Thank you.
|
By
Rudy N6DOZ
·
#6517
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Steve,
I could have sworn I put both on the last message. Let me try the logs again.
MB_BM
I: 2020-05-15 07:06:45.626 MMDVM_Bridge:
I: 2020-05-15 07:06:45.626 Portions Copyright (C) 2018
Steve,
I could have sworn I put both on the last message. Let me try the logs again.
MB_BM
I: 2020-05-15 07:06:45.626 MMDVM_Bridge:
I: 2020-05-15 07:06:45.626 Portions Copyright (C) 2018
|
By
Rudy N6DOZ
·
#6516
·
Edited
|
|
Re: Setting up YSF
Got it Eric,first time setting this up.Thank You
Got it Eric,first time setting this up.Thank You
|
By
Pete Fierro <overthetop52@...>
·
#6515
·
|
|
Re: Setting up YSF
Pete,
If your set up is ASL to YSF, leave AB.ini to TG-9 and make sure point MB.ini YSF to your YSF reflector IP or DNS.
73, Eric
Pete,
If your set up is ASL to YSF, leave AB.ini to TG-9 and make sure point MB.ini YSF to your YSF reflector IP or DNS.
73, Eric
|
By
Eric-K6KWB
·
#6514
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Rudy,
You should have 2 different MB log files. One for MB_BM and one for MB_XLX See the [Log] stanza in each MB.ini Look at the FileRoot value for each MB.
Steve
On
Rudy,
You should have 2 different MB log files. One for MB_BM and one for MB_XLX See the [Log] stanza in each MB.ini Look at the FileRoot value for each MB.
Steve
On
|
By
Steve N4IRS
·
#6513
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Rudy,
Double check your MB_BM DVSwitch.ini set to slot 1, should be slot 2.
M: 2020-05-15 07:06:48.384 DMR, Opening INI file: DVSwitch.ini
M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] Address ->
Rudy,
Double check your MB_BM DVSwitch.ini set to slot 1, should be slot 2.
M: 2020-05-15 07:06:48.384 DMR, Opening INI file: DVSwitch.ini
M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] Address ->
|
By
Eric-K6KWB
·
#6512
·
Edited
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Ernie,
So do you have it setup as the more previous way (Steve Millar's doc https://docs.google.com/document/d/1n17cx_9elLJoMmcQWM0_XOm2dicKdIC6ar_0S16904A/edit) with two DMRGateways?
Would you mind
Ernie,
So do you have it setup as the more previous way (Steve Millar's doc https://docs.google.com/document/d/1n17cx_9elLJoMmcQWM0_XOm2dicKdIC6ar_0S16904A/edit) with two DMRGateways?
Would you mind
|
By
Rudy N6DOZ
·
#6511
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Steve, here's the logs for both MBs.
MB_BM
I: 2020-05-15 07:06:42.831 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT
I: 2020-05-15 07:06:45.626 MMDVM_Bridge:
I: 2020-05-15 07:06:45.626
Steve, here's the logs for both MBs.
MB_BM
I: 2020-05-15 07:06:42.831 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT
I: 2020-05-15 07:06:45.626 MMDVM_Bridge:
I: 2020-05-15 07:06:45.626
|
By
Rudy N6DOZ
·
#6510
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
XLX Will be passing its traffic via Tg9.
What I do is MB to MB to Dmrgateway.
In the settings of the Dmrgateway rewrite tg9 to tg on Brandmeister.
This works well on Dmr+ and Brandmeister.
You can
XLX Will be passing its traffic via Tg9.
What I do is MB to MB to Dmrgateway.
In the settings of the Dmrgateway rewrite tg9 to tg on Brandmeister.
This works well on Dmr+ and Brandmeister.
You can
|
By
Ernie Gm7kbk
·
#6509
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
logs snips? ini snips?
On 5/15/20 3:29 AM, Rudy N6DOZ wrote:
logs snips? ini snips?
On 5/15/20 3:29 AM, Rudy N6DOZ wrote:
|
By
Steve N4IRS
·
#6508
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
After putting a static TG through BM selfcare, I was able to hear audio coming from someone on the BM TG side.
However, when I transmit from the XLX side, no audio is heard on the BM TG side.
I'm
After putting a static TG through BM selfcare, I was able to hear audio coming from someone on the BM TG side.
However, when I transmit from the XLX side, no audio is heard on the BM TG side.
I'm
|
By
Rudy N6DOZ
·
#6507
·
|
|
Re: Bridging XLX to BM DMR (New Way 2020)
#mmdvm_bridge
Ok :) Easy enough. Thank you!
I'll set everything up tonight and post my results.
Thanks a ton! 7-3 N6DOZ
Ok :) Easy enough. Thank you!
I'll set everything up tonight and post my results.
Thanks a ton! 7-3 N6DOZ
|
By
Rudy N6DOZ
·
#6506
·
|