|
Re: Some questions about dvswitch.sh and Analog_Bridge
Hello Tim
I never look at logs.
Just look at the info on the screen.
Can see whats going on in real time.
Also see whats gone down then just restart the software.
There is always info passing back and
Hello Tim
I never look at logs.
Just look at the info on the screen.
Can see whats going on in real time.
Also see whats gone down then just restart the software.
There is always info passing back and
|
By
Ernie Gm7kbk
·
#6708
·
|
|
Re: Some questions about dvswitch.sh and Analog_Bridge
Ok thanks. I'll try it. I know that I tried setting to 4 - warning and I got the close to 100% CPU usage but of course the packets were suppressed.
Hiding the alerts doesn't necessarily mean it fixes
Ok thanks. I'll try it. I know that I tried setting to 4 - warning and I got the close to 100% CPU usage but of course the packets were suppressed.
Hiding the alerts doesn't necessarily mean it fixes
|
By
Tim Payne
·
#6707
·
|
|
Re: Some questions about dvswitch.sh and Analog_Bridge
In the Analog_Bridge.ini
loglevel = 2 you could change it to 0
I never change it as I use this info to see whats going on.
As I run in terminal windows the info from the logs act like a dashboard for
In the Analog_Bridge.ini
loglevel = 2 you could change it to 0
I never change it as I use this info to see whats going on.
As I run in terminal windows the info from the logs act like a dashboard for
|
By
Ernie Gm7kbk
·
#6706
·
|
|
Re: #analog_bridge
#analog_bridge
i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode
I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke
i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode
I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke
|
By
andrew delgado
·
#6705
·
|
|
Re: #analog_bridge
#analog_bridge
Yes Mike, Im running the stick at the same host using pi3,
my problem is when i issue the DMR mode @ Dvswitch mobile client the error pertaining to port 31100 will close. and will not receive audio
Yes Mike, Im running the stick at the same host using pi3,
my problem is when i issue the DMR mode @ Dvswitch mobile client the error pertaining to port 31100 will close. and will not receive audio
|
By
andrew delgado
·
#6704
·
|
|
Re: Some questions about dvswitch.sh and Analog_Bridge
Hey guys,
Still plotting on with this spamming of "INFO packet sent to USRP client" in my logs. it seems to be related to the 2 instances of AB.
My setup is HBlink Master2 ----> MB -----> AB_DMR
Hey guys,
Still plotting on with this spamming of "INFO packet sent to USRP client" in my logs. it seems to be related to the 2 instances of AB.
My setup is HBlink Master2 ----> MB -----> AB_DMR
|
By
Tim Payne
·
#6703
·
|
|
Re: #analog_bridge
#analog_bridge
Andrew,
By the error you are seeing I have to assume you are running AMBEServer on the same machine as Analog_Bridge is running on. If this is so, you can just run the DV3000 (or other stick)
Andrew,
By the error you are seeing I have to assume you are running AMBEServer on the same machine as Analog_Bridge is running on. If this is so, you can just run the DV3000 (or other stick)
|
By
Mike Zingman - N4IRR
·
#6702
·
|
|
Re: #analog_bridge
#analog_bridge
HI Ernie,
I only have one instance for analog and mmdvm bridge this is right after install and configuration from the pdf documentation posted here.
Regards,
Andrew
HI Ernie,
I only have one instance for analog and mmdvm bridge this is right after install and configuration from the pdf documentation posted here.
Regards,
Andrew
|
By
andrew delgado
·
#6701
·
|
|
Re: ARM IMAGE
Hamvoip is based on Arch not Debian! So you need to use the correct package manager.
pacman -Sy package_name
This will install packages in Arch, if you need further information about pacman (not the
Hamvoip is based on Arch not Debian! So you need to use the correct package manager.
pacman -Sy package_name
This will install packages in Arch, if you need further information about pacman (not the
|
By
Scott Evans
·
#6700
·
|
|
Re: ARM IMAGE
How were you able to get DV Switch on hamvoip?
I did "apt-get install dvswitch -y" at the shell& got this message
apt-get command not found
How were you able to get DV Switch on hamvoip?
I did "apt-get install dvswitch -y" at the shell& got this message
apt-get command not found
|
By
Pete Fierro
·
#6699
·
|
|
Re: ARM IMAGE
Yes, I currently have DVSwitch installed on a HAMVOIP image and that allows allstar to DMR. I am sure it will do more but I have not looked into anything else just yet. The issue is even with a DV3000
Yes, I currently have DVSwitch installed on a HAMVOIP image and that allows allstar to DMR. I am sure it will do more but I have not looked into anything else just yet. The issue is even with a DV3000
|
By
W8DSB
·
#6698
·
|
|
Re: ARM IMAGE
On second thought, Will you be connecting the AllStar node to a analog radio?
Steve N4IRS
On second thought, Will you be connecting the AllStar node to a analog radio?
Steve N4IRS
|
By
Steve N4IRS
·
#6697
·
|
|
Re: ARM IMAGE
Not yet.....
By
Steve N4IRS
·
#6696
·
|
|
ARM IMAGE
Is there a ARM image available (PI 4) that has ASL, DVSWitch already installed? I have made a few now using HAMVOIP and DVSwitch but the ASL to DMR is only so so even with a DV3000 USB dongle. Hoping
Is there a ARM image available (PI 4) that has ASL, DVSWitch already installed? I have made a few now using HAMVOIP and DVSwitch but the ASL to DMR is only so so even with a DV3000 USB dongle. Hoping
|
By
W8DSB
·
#6695
·
|
|
Re: #analog_bridge
#analog_bridge
You may have another Analoge_Bridge running.
MMDVM_Bridge and Analoge_Bridge have usually been installed to start up when your device is restarted.
I get caught out myself. I like running them in
You may have another Analoge_Bridge running.
MMDVM_Bridge and Analoge_Bridge have usually been installed to start up when your device is restarted.
I get caught out myself. I like running them in
|
By
Ernie Gm7kbk
·
#6694
·
|
|
#analog_bridge
#analog_bridge
Hi All,
Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone
port 31100 will close.
I: 2020-06-03 04:51:38.416
Hi All,
Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone
port 31100 will close.
I: 2020-06-03 04:51:38.416
|
By
andrew delgado
·
#6693
·
Edited
|
|
Re: ASL_node_list.txt
Works great Mike. tnx a lot. will be a big benefit when mobiling. FWIW, to make testing and loading simpler, I created a much smaller node_list.txt file - only a dozen entries instead of the 15K
Works great Mike. tnx a lot. will be a big benefit when mobiling. FWIW, to make testing and loading simpler, I created a much smaller node_list.txt file - only a dozen entries instead of the 15K
|
By
Tom Corcoran
·
#6692
·
|
|
Some questions about dvswitch.sh and Analog_Bridge
Evening all,
I am pretty new to the MMDVM_Bridge software and was trying have a bridge from private hblink server to p25 networks. to do this i was trying HBlink ----> DMR2YSF -----> YSF2P25 ----->
Evening all,
I am pretty new to the MMDVM_Bridge software and was trying have a bridge from private hblink server to p25 networks. to do this i was trying HBlink ----> DMR2YSF -----> YSF2P25 ----->
|
By
Tim Payne
·
#6691
·
|
|
Re: ASL_node_list.txt
And yes you did misunderstand.
Nodes in the database (node_list.txt) are preceded by a *2 when invoked from the "Nodes" menu or using the long press for the first 10
Nodes in the "Macro" menu,
And yes you did misunderstand.
Nodes in the database (node_list.txt) are preceded by a *2 when invoked from the "Nodes" menu or using the long press for the first 10
Nodes in the "Macro" menu,
|
By
Mike Zingman - N4IRR
·
#6690
·
|
|
Re: ASL_node_list.txt
Sorry, ment *30
so a string like *22100*30 would dial node 2100 in RX mode then change over to TX. DVSM supplies the *2 so you would not need that in your database.
Sorry, ment *30
so a string like *22100*30 would dial node 2100 in RX mode then change over to TX. DVSM supplies the *2 so you would not need that in your database.
|
By
Mike Zingman - N4IRR
·
#6689
·
|