|
Re: YSF <--> DMR Bridge BM blocked
I have tried all sorts of methods in the past, the first effective workaround was to use Analog Bridge between DMR and YSF where the DMR side has 2000ms hang time from Analog Bridge. The drawback is
I have tried all sorts of methods in the past, the first effective workaround was to use Analog Bridge between DMR and YSF where the DMR side has 2000ms hang time from Analog Bridge. The drawback is
|
By
ve6gcd@...
·
#6765
·
|
|
Re: YSF <--> DMR Bridge BM blocked
found a temporary workaround for this using two nodes of usrp with primary node as YSF and second node as DMR with added minTxTimeMS to prevent blocked message from BM (bridge removed). Audio quality
found a temporary workaround for this using two nodes of usrp with primary node as YSF and second node as DMR with added minTxTimeMS to prevent blocked message from BM (bridge removed). Audio quality
|
By
Bj DU8BL
·
#6764
·
Edited
|
|
YSF <--> DMR Bridge BM blocked
I have a working YSF <--> DMR Bridge but sometimes it gets blocked from BM due to short rapid ptt press on the analog side of the DR-2X which is also connected to the YSF side of the bridge. Is there
I have a working YSF <--> DMR Bridge but sometimes it gets blocked from BM due to short rapid ptt press on the analog side of the DR-2X which is also connected to the YSF side of the bridge. Is there
|
By
Bj DU8BL
·
#6763
·
|
|
Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector
https://github.com/DVSwitch/MMDVM_Bridge
On 6/13/20 8:34 AM, Adrianm0glj@... wrote:
https://github.com/DVSwitch/MMDVM_Bridge
On 6/13/20 8:34 AM, Adrianm0glj@... wrote:
|
By
Steve N4IRS
·
#6762
·
|
|
Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector
On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_BridgeThanks Steve.
Where would I find this package?
Adrian M0GLJ
On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_BridgeThanks Steve.
Where would I find this package?
Adrian M0GLJ
|
By
Adrian M0GLJ
·
#6761
·
|
|
Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector
We don't use YSF2DMR. If you want to bridge the 2 networks use MMDVM_Bridge.
Steve N4IRS
On 6/12/20 8:50 PM, Adrianm0glj@... wrote:
We don't use YSF2DMR. If you want to bridge the 2 networks use MMDVM_Bridge.
Steve N4IRS
On 6/12/20 8:50 PM, Adrianm0glj@... wrote:
|
By
Steve N4IRS
·
#6760
·
|
|
Setting up a YSF Reflector <---> XLX (DMR) Reflector
Hi All
I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the
Hi All
I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the
|
By
Adrian M0GLJ
·
#6759
·
|
|
Re: YSF <> BM DMR Bridging - Best Way?
After doing even more reading and experimenting, I got this all worked out. I ended up switching XLX back to serving D-STAR + DMR, C4FM using YSFReflector, and tying those two together with
After doing even more reading and experimenting, I got this all worked out. I ended up switching XLX back to serving D-STAR + DMR, C4FM using YSFReflector, and tying those two together with
|
By
Jason McCormick N8EI
·
#6758
·
|
|
YSF <> BM DMR Bridging - Best Way?
Hello all,
Is there any document/guidance on building a YSF to DMR (BM) connection the right way? Here's the situation.... I run XLX330 using xlxd + ambed. At one point it was working across all three
Hello all,
Is there any document/guidance on building a YSF to DMR (BM) connection the right way? Here's the situation.... I run XLX330 using xlxd + ambed. At one point it was working across all three
|
By
Jason McCormick N8EI
·
#6757
·
|
|
Re: radioid.net URL update in dvswitch.sh
Edit dvswitch.sh changing
After changing, run the script manually to immediately update the subscribers file or wait until it runs automatically.
Edit dvswitch.sh changing
After changing, run the script manually to immediately update the subscribers file or wait until it runs automatically.
|
By
Jeffrey [K8JTK]
·
#6756
·
|
|
Re: Multiple instances of Bridge
Version 1.4.2
By
W8DSB
·
#6755
·
|
|
Re: radioid.net URL update in dvswitch.sh
On Thu, Jun 4, 2020 at 07:35 AM, Jeffrey [K8JTK] wrote:
A pull of the DVSwitch-System-Builder has the old URL. If an update is already available, it has the old url in that repo.Hi Jeffrey
I have the
On Thu, Jun 4, 2020 at 07:35 AM, Jeffrey [K8JTK] wrote:
A pull of the DVSwitch-System-Builder has the old URL. If an update is already available, it has the old url in that repo.Hi Jeffrey
I have the
|
By
Giannis Giannakosian - SV4FFB
·
#6754
·
|
|
Re: Multiple instances of Bridge
Hi Mike, I can’t get to the version number from work as I can’t login to Amazon without a private key. However looking at my dropbox at the .ini I have no TXport or RXport listed in the file. Can
Hi Mike, I can’t get to the version number from work as I can’t login to Amazon without a private key. However looking at my dropbox at the .ini I have no TXport or RXport listed in the file. Can
|
By
W8DSB
·
#6753
·
|
|
Re: Multiple instances of Bridge
Do not use fromDMRPort and toDMRPort. I asked you to use TXPort and RXPort in AB. You should have gotten a nasty message in your AB log file, did you see it?
Also, just to make sure, what version of
Do not use fromDMRPort and toDMRPort. I asked you to use TXPort and RXPort in AB. You should have gotten a nasty message in your AB log file, did you see it?
Also, just to make sure, what version of
|
By
Mike Zingman - N4IRR
·
#6752
·
|
|
Re: Multiple instances of Bridge
Inline
On 6/9/2020 11:17 AM, W8DSB wrote:
Does XLX 1 not go to ASL?
Not shure what you mean.
I don't think you need HBlink. Do you mean run with DVSwitch Mobile?
Inline
On 6/9/2020 11:17 AM, W8DSB wrote:
Does XLX 1 not go to ASL?
Not shure what you mean.
I don't think you need HBlink. Do you mean run with DVSwitch Mobile?
|
By
Steve N4IRS
·
#6751
·
|
|
Re: Multiple instances of Bridge
Thanks Steve for your input. This is what I have now, I made it more simple until I get it working:
analog_bridge.ini
[AMBE_AUDIO]
server = 127.0.0.1 ; IP address of
Thanks Steve for your input. This is what I have now, I made it more simple until I get it working:
analog_bridge.ini
[AMBE_AUDIO]
server = 127.0.0.1 ; IP address of
|
By
W8DSB
·
#6750
·
|
|
Re: Multiple instances of Bridge
Only TX ports (or to) are multi-port.
If you are going to add descriptive text, comment it out. Example
; Source1 (Allstar):
If you are going to post from multiple files mark them as
Only TX ports (or to) are multi-port.
If you are going to add descriptive text, comment it out. Example
; Source1 (Allstar):
If you are going to post from multiple files mark them as
|
By
Steve N4IRS
·
#6749
·
|
|
Re: Multiple instances of Bridge
Just to follow up, it does not work, I might have done something wrong but I don't see where if I did. Here is the setup:
[AMBE_AUDIO]
server = 127.0.0.1
Just to follow up, it does not work, I might have done something wrong but I don't see where if I did. Here is the setup:
[AMBE_AUDIO]
server = 127.0.0.1
|
By
W8DSB
·
#6748
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
DVLINK image v.9.7 ready to be updated via internet for pi 2/3/4 versions
We have also created the same DVLINK V.9.7.0 image for virtual BOX multilanguage, with the sections "DVSWITCH, HBLINK SERVER
DVLINK image v.9.7 ready to be updated via internet for pi 2/3/4 versions
We have also created the same DVLINK V.9.7.0 image for virtual BOX multilanguage, with the sections "DVSWITCH, HBLINK SERVER
|
By
EA5GVK Joaquin
·
#6747
·
|
|
Re: Multiple instances of Bridge
Also note that this will not cross connect the XLX servers with each other. That is possible by using the same technique on the dvswitch.ini [DMR] TXPorts. However I would take it one step at a time.
Also note that this will not cross connect the XLX servers with each other. That is possible by using the same technique on the dvswitch.ini [DMR] TXPorts. However I would take it one step at a time.
|
By
Mike Zingman - N4IRR
·
#6746
·
|