|
enabling an AMBE dongle
I have the ea5gvk img on a Rpi and it's working fine.
The DMR audio is OK, DStar audio is unreadable, so I bought a NWD usb dongle. lsusb shows the device, and ttyUSB0 is in /dev
Latency timer comes
I have the ea5gvk img on a Rpi and it's working fine.
The DMR audio is OK, DStar audio is unreadable, so I bought a NWD usb dongle. lsusb shows the device, and ttyUSB0 is in /dev
Latency timer comes
|
By
Derek William Haden <facebook@...>
·
#6874
·
Edited
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
No, but it will get you set up with ASL and Analog_Bridge. Then you will need to connect IPSC_Bridge
Sent by smoke signal (AT&T)
No, but it will get you set up with ASL and Analog_Bridge. Then you will need to connect IPSC_Bridge
Sent by smoke signal (AT&T)
|
By
Steve N4IRS
·
#6873
·
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
I just checked the IPSC2-Texas master. One of the three TG's that I'm interested in on DMR-MARC is listed (Lonestar). The two that were not (Dillo and Cactus) are private intertie related TG's. So,
I just checked the IPSC2-Texas master. One of the three TG's that I'm interested in on DMR-MARC is listed (Lonestar). The two that were not (Dillo and Cactus) are private intertie related TG's. So,
|
By
Tom
·
#6872
·
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
I was just reminded that many of the DMARC TGs are available on DMR+ which MMDVM_Bridge will connect to. I would check if the TGs you want are available on DMR+
Steve N4IRS
I was just reminded that many of the DMARC TGs are available on DMR+ which MMDVM_Bridge will connect to. I would check if the TGs you want are available on DMR+
Steve N4IRS
|
By
Steve N4IRS
·
#6871
·
|
|
Re: DV4Mini and DVswitch?
Thank you.
Yes looks like I was making the assumption that DV4Mini, had a vocoder, but doesn't.
What I need is a USB vocoder widget like the THUMBDV or equivalent.
Thank you.
Yes looks like I was making the assumption that DV4Mini, had a vocoder, but doesn't.
What I need is a USB vocoder widget like the THUMBDV or equivalent.
|
By
Derek William Haden <facebook@...>
·
#6870
·
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
See this:
<https://dvswitch.groups.io/g/main/files/IPSC_AB_ASL.txt>
<https://dvswitch.groups.io/g/allstarlink/files/ASL%20to%20DMR%20Bridge.pdf>
Instead of MMDVM_Bridge you will
See this:
<https://dvswitch.groups.io/g/main/files/IPSC_AB_ASL.txt>
<https://dvswitch.groups.io/g/allstarlink/files/ASL%20to%20DMR%20Bridge.pdf>
Instead of MMDVM_Bridge you will
|
By
Steve N4IRS
·
#6869
·
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
Jeff,
I have an older ASL-DMR bridge running with a DV3000 running with access to two cbridge connections (since 2015). As long as I maintain full quieting access to my allstarlink node, there will
Jeff,
I have an older ASL-DMR bridge running with a DV3000 running with access to two cbridge connections (since 2015). As long as I maintain full quieting access to my allstarlink node, there will
|
By
Tom
·
#6868
·
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
You will probably want to do a separate asl node from your bm connection. From past experience bm would prefer you not bridging networks. So you may want to setup a separate public asl node to connect
You will probably want to do a separate asl node from your bm connection. From past experience bm would prefer you not bridging networks. So you may want to setup a separate public asl node to connect
|
By
Jeff Lehman, N8ACL
·
#6867
·
|
|
Re: analog-DMR bridge DMR-MARC connection
#analog_bridge
Tom,
The connection to a c-Bridge would be through IPSC_Bridge rather then MMDVM_Bridge.
It would look like this for ASL:
ASL <-> Analog_Bridge <-> IPSC_Bridge <-> c-Bridge.
Tom,
The connection to a c-Bridge would be through IPSC_Bridge rather then MMDVM_Bridge.
It would look like this for ASL:
ASL <-> Analog_Bridge <-> IPSC_Bridge <-> c-Bridge.
|
By
Steve N4IRS
·
#6866
·
|
|
analog-DMR bridge DMR-MARC connection
#analog_bridge
Can a DMR-allstar bridge connect to a DMR-MARC cbridge? I've been seeing only Brandmeister connection info.
Thanks,
Tom / K5TRA
Can a DMR-allstar bridge connect to a DMR-MARC cbridge? I've been seeing only Brandmeister connection info.
Thanks,
Tom / K5TRA
|
By
Tom
·
#6865
·
|
|
Re: DV4Mini and DVswitch?
Yes, a hardware vocoder is preferred. The question is about a DV4 Mini. Different device. DV4 Mini radio not usable with DVSwitch.
Yes, a hardware vocoder is preferred. The question is about a DV4 Mini. Different device. DV4 Mini radio not usable with DVSwitch.
|
By
Steve N4IRS
·
#6864
·
|
|
Re: DV4Mini and DVswitch?
I've been using a ThumbDV and it's working quite well. Nice, clear audio. Is it worlds better than the MD380 emulator? Nah. But it's good.
I've been using a ThumbDV and it's working quite well. Nice, clear audio. Is it worlds better than the MD380 emulator? Nah. But it's good.
|
By
Aerodan
·
#6863
·
|
|
DVSwitch and Bluetooth
I recently started to use DVSwitch with Allstar and just tried to set up a Bluetooth headset to work mobile with, having seen the option in the settings.
What I was not expecting was the 'Not yet
I recently started to use DVSwitch with Allstar and just tried to set up a Bluetooth headset to work mobile with, having seen the option in the settings.
What I was not expecting was the 'Not yet
|
By
Barry G4MKT
·
#6862
·
|
|
Re: Add XLX reflectors to Dstar
One other thing I did work out, well at least for the image I am using on the Rpi.
I had to change directory before running the pushfile
cd /opt/Analog_Bridge
then
./dvswitch.sh pushfile
One other thing I did work out, well at least for the image I am using on the Rpi.
I had to change directory before running the pushfile
cd /opt/Analog_Bridge
then
./dvswitch.sh pushfile
|
By
Derek William Haden <facebook@...>
·
#6861
·
|
|
Re: Add XLX reflectors to Dstar
Yes I worked out that it was a syntax error, many thanks.
Yes I worked out that it was a syntax error, many thanks.
|
By
Derek William Haden <facebook@...>
·
#6860
·
|
|
Re: MMDVM Bridge: Need for DMR Id Lookup?
Thanks Steve.
Interestingly, when I comment either the file pointer or the complete stanza, this still shows up in the log...
"Started the DMR Id lookup reload thread"
Perhaps a more ideal situation
Thanks Steve.
Interestingly, when I comment either the file pointer or the complete stanza, this still shows up in the log...
"Started the DMR Id lookup reload thread"
Perhaps a more ideal situation
|
By
Dan K2IE
·
#6859
·
|
|
Re: Add XLX reflectors to Dstar
Use pushFile, I was looking at the function name not the command name.
Use pushFile, I was looking at the function name not the command name.
|
By
Mike Zingman - N4IRR
·
#6858
·
|
|
Re: MMDVM Bridge: Need for DMR Id Lookup?
One reason I can see is for logging. Easier to lookup a callsign then a DMR ID when debugging.
That being said Comment out the file pointer for DMR ID lookup in MB.ini
Steve N4IRS
One reason I can see is for logging. Easier to lookup a callsign then a DMR ID when debugging.
That being said Comment out the file pointer for DMR ID lookup in MB.ini
Steve N4IRS
|
By
Steve N4IRS
·
#6857
·
|
|
MMDVM Bridge: Need for DMR Id Lookup?
I'm running an MMDVM Bridge instance as part of an Asterisk <--> HBlink connector.
I cannot think of any reason why I'd need MMDVM Bridge to lookup DMR IDs in either direction for this purpose.
So,
I'm running an MMDVM Bridge instance as part of an Asterisk <--> HBlink connector.
I cannot think of any reason why I'd need MMDVM Bridge to lookup DMR IDs in either direction for this purpose.
So,
|
By
Dan K2IE
·
#6856
·
|
|
Re: Add XLX reflectors to Dstar
This is what the "developers" sent:
- Create your reflector list (a text file) in /tmp called DSTAR_node_list.txt
- The file is a list of reflectors and human readable names:
This is what the "developers" sent:
- Create your reflector list (a text file) in /tmp called DSTAR_node_list.txt
- The file is a list of reflectors and human readable names:
|
By
Steve N4IRS
·
#6855
·
|