|
DMR <> P25 (XLX)
Hello,
Currently I have DMR <> NXDN bridged using mmdvm_bridge. My XLX DMR is on 62030. I looked up the DMR <> P25 bridge diagram, I see that I need 1 instance of MB and 2 of AB.
Since I have BM
Hello,
Currently I have DMR <> NXDN bridged using mmdvm_bridge. My XLX DMR is on 62030. I looked up the DMR <> P25 bridge diagram, I see that I need 1 instance of MB and 2 of AB.
Since I have BM
|
By
Komkit Listisard
·
#9454
·
|
|
Re: DR2 X connection options
Hi
Just set the hotspot to duplex mode.
Program frquencies and away you go .
Tx frequency is receive fx of repeater and vice versa for Rx frequency
Robin .
Hi
Just set the hotspot to duplex mode.
Program frquencies and away you go .
Tx frequency is receive fx of repeater and vice versa for Rx frequency
Robin .
|
By
Robin Williams <phonetechash@...>
·
#9453
·
|
|
Re: DR2 X connection options
Robin,
Sorry another question, how did you seperate the TX and RX frequencies?
Did you program it in repeater mode and then switch it back to simplex or am I making it far too complex. I cannot make
Robin,
Sorry another question, how did you seperate the TX and RX frequencies?
Did you program it in repeater mode and then switch it back to simplex or am I making it far too complex. I cannot make
|
By
Jeff Dixon
·
#9452
·
|
|
Re: Free DMR with DVS
In order to make it work you need to setup Options field.
In order to make it work you need to setup Options field.
|
By
inmarex@...
·
#9451
·
|
|
ASL<>YSF dashboard callsign for gateway id?
I've been helping a ham with a bridge and we got everything working however, the dashboard
http://ysf.praredn.org/
is showing the DMR ID for the bridge's gateway id instead of the resolved callsign.
I
I've been helping a ham with a bridge and we got everything working however, the dashboard
http://ysf.praredn.org/
is showing the DMR ID for the bridge's gateway id instead of the resolved callsign.
I
|
By
Russell, KV4S
·
#9450
·
|
|
Re: DVSWITCH USRP registration drops when idle for a few minutes
Is this when using cellular or wifi (or both)
Is this when using cellular or wifi (or both)
|
By
Steve N4IRS
·
#9449
·
|
|
Re: DV Switch Dashboard
I should not be a port problem. When you installed the dashboard for the ysfreflector it should have been put in a separate directory.
Dashboard for DVSwitch is in /var/www/html
Dashboard for my m17
I should not be a port problem. When you installed the dashboard for the ysfreflector it should have been put in a separate directory.
Dashboard for DVSwitch is in /var/www/html
Dashboard for my m17
|
By
Ernie Gm7kbk
·
#9448
·
|
|
Re: Bridge
sorry for the late reply after a few tests it looks like MMDVM is what is using the Ports and not allowing the Analog Bridge to start
and have done every thing by what this says
sorry for the late reply after a few tests it looks like MMDVM is what is using the Ports and not allowing the Analog Bridge to start
and have done every thing by what this says
|
By
Joshua Johnson - KC5JMJ
·
#9447
·
|
|
DV Switch Dashboard
Hi all,
I have installed DV Switch on my server and all works fine. Was able to view the dashboard no problem. However, I have also installed a YSF Reflector on the same server and now the dashboard
Hi all,
I have installed DV Switch on my server and all works fine. Was able to view the dashboard no problem. However, I have also installed a YSF Reflector on the same server and now the dashboard
|
By
Alex MM7BDW
·
#9446
·
|
|
Re: Ysf to ysf reflectors
Hi Jeff. See answer on your other post.
Robin
Hi Jeff. See answer on your other post.
Robin
|
By
Robin Williams <phonetechash@...>
·
#9445
·
|
|
Re: DR2 X connection options
Hi Jeff.
What we have done here, is, we have a raspberry pi running pi-star sitting next to the repeater and connected to the internet . This is on the repeater frequencys. This pistar is connected to
Hi Jeff.
What we have done here, is, we have a raspberry pi running pi-star sitting next to the repeater and connected to the internet . This is on the repeater frequencys. This pistar is connected to
|
By
Robin Williams <phonetechash@...>
·
#9444
·
|
|
Re: DVSWITCH USRP registration drops when idle for a few minutes
Just checked and both have it turned off.
Just checked and both have it turned off.
|
By
Ken Rugaber
·
#9443
·
|
|
Re: Ysf to ysf reflectors
I cannot help you I am afraid Robin but perhaps you might help me please? Can a YSF reflector be connexted to an individual DR2X repeater in some way so that someone with an FT70D for instance can
I cannot help you I am afraid Robin but perhaps you might help me please? Can a YSF reflector be connexted to an individual DR2X repeater in some way so that someone with an FT70D for instance can
|
By
Jeff Dixon
·
#9442
·
|
|
DR2 X connection options
Gents
I have always said if you want to know ask an expert!
I am the keeper of a DR2 X based Wires x connected repeater, It has great coverage up and down a major road so we would rather not use it
Gents
I have always said if you want to know ask an expert!
I am the keeper of a DR2 X based Wires x connected repeater, It has great coverage up and down a major road so we would rather not use it
|
By
Jeff Dixon
·
#9441
·
|
|
Re: DVSWITCH USRP registration drops when idle for a few minutes
Have you checked and turned off battery optimization on your Android devices.
Have you checked and turned off battery optimization on your Android devices.
|
By
Steve N4IRS
·
#9440
·
|
|
DVSWITCH USRP registration drops when idle for a few minutes
I have two different Android devices running dvswitch mobile to the same dvswitch server.
When I register a USRP service and select a DMR TG it works fine as long as I am in a QSO. But as soon as I
I have two different Android devices running dvswitch mobile to the same dvswitch server.
When I register a USRP service and select a DMR TG it works fine as long as I am in a QSO. But as soon as I
|
By
Ken Rugaber
·
#9439
·
|
|
Ysf to ysf reflectors
Hi all. Hope this is the correct group .
I have 2 ysf reflectors running on seperate raspberry pi's .
These 2 reflectors are on the same lan and work fine etc.
What i would like to do is link these 2
Hi all. Hope this is the correct group .
I have 2 ysf reflectors running on seperate raspberry pi's .
These 2 reflectors are on the same lan and work fine etc.
What i would like to do is link these 2
|
By
Robin Williams <phonetechash@...>
·
#9438
·
|
|
Re: Registration of Dv Switch
Having same issue. Too bad you did not resolve. My dvswitch will not register when cell is on. Works on WiFi cell SIM card off.
Having same issue. Too bad you did not resolve. My dvswitch will not register when cell is on. Works on WiFi cell SIM card off.
|
By
Randy Proehl
·
#9437
·
|
|
Re: dvswitch setup issues on link radio
I kinda missed that >'link to repeater' first time so I would say your issue is in mode/settings
Try this...
Duplex =1
nounkeyct=1
link2link=yes
I kinda missed that >'link to repeater' first time so I would say your issue is in mode/settings
Try this...
Duplex =1
nounkeyct=1
link2link=yes
|
By
Mike KB8JNM
·
#9436
·
|
|
Re: dvswitch setup issues on link radio
Bryan,
While it could be many more things than I might mention here,
If your alinco is in simplex mode (single half duplex) you may have the incorrect duplex mode set for it if you are
Bryan,
While it could be many more things than I might mention here,
If your alinco is in simplex mode (single half duplex) you may have the incorrect duplex mode set for it if you are
|
By
Mike KB8JNM
·
#9435
·
|