|
Re: ASL Using DVSWITCH client on android and Anytone 878 radio
#dvs
#analog_bridge
Are you on the same LAN? Is the Server exposed to the outside world?
Are you on the same LAN? Is the Server exposed to the outside world?
|
By
Steve N4IRS
·
#9792
·
|
|
Re: ASL Using DVSWITCH client on android and Anytone 878 radio
#dvs
#analog_bridge
Yes same issue
73
N1saf
Steve
Yes same issue
73
N1saf
Steve
|
By
Fairfieldsteve@...
·
#9791
·
|
|
Re: ASL Using DVSWITCH client on android and Anytone 878 radio
#dvs
#analog_bridge
Have you tried anyother TG or parrot?
Have you tried anyother TG or parrot?
|
By
Steve N4IRS
·
#9790
·
|
|
ASL Using DVSWITCH client on android and Anytone 878 radio
#dvs
#analog_bridge
.I am running the ASL 2.0 on a SHAri rpi4 NODE. It works fine except for one issue:
If I use 50001 tx and receive ports in AB.ini and in the DVSWITCH mobile client config, I can connect to BM ie TG91
.I am running the ASL 2.0 on a SHAri rpi4 NODE. It works fine except for one issue:
If I use 50001 tx and receive ports in AB.ini and in the DVSWITCH mobile client config, I can connect to BM ie TG91
|
By
Stephen Fairfield
·
#9789
·
|
|
Re: DVSwitch Client does not receive
Here is a follow up to this.
I was able to connect to his VPS with DVSwitch Mobile. Gareth found a issue with his wifi / LAN configuration. I'll let him explain.
Gareth, to answer your
Here is a follow up to this.
I was able to connect to his VPS with DVSwitch Mobile. Gareth found a issue with his wifi / LAN configuration. I'll let him explain.
Gareth, to answer your
|
By
Steve N4IRS
·
#9788
·
|
|
Re: DVSwitch Client does not receive
Set the 2 ports to the same value and send me the IP address direct szingman@...
Set the 2 ports to the same value and send me the IP address direct szingman@...
|
By
Steve N4IRS
·
#9787
·
|
|
Re: DVSwitch Client does not receive
I'm just adding my current testing results.
Ok in an effort to rule out even the absurd. I've gone and paid for a VPS server for a month just to install DVSwitch - I figured lets try a full Deban
I'm just adding my current testing results.
Ok in an effort to rule out even the absurd. I've gone and paid for a VPS server for a month just to install DVSwitch - I figured lets try a full Deban
|
By
Gareth GM0WUR
·
#9786
·
|
|
Re: DVSwitch Client does not receive
Hi Steve,
Sorry for the delay - got called away on an urgent matter.
Anyway just back in the shack now so here goes.
Hi Steve,
Sorry for the delay - got called away on an urgent matter.
Anyway just back in the shack now so here goes.
|
By
Gareth GM0WUR
·
#9785
·
|
|
Re: DVSwitch Client does not receive
I am going to be away from the computer for the next few hours. I'll look at your post when I return. Maybe someone else can look it over and comment.
I am going to be away from the computer for the next few hours. I'll look at your post when I return. Maybe someone else can look it over and comment.
|
By
Steve N4IRS
·
#9784
·
|
|
Re: DVSwitch Client does not receive
Show me your Analog_Bridge .ini and a screen shot of the account settings in Android.
Show me your Analog_Bridge .ini and a screen shot of the account settings in Android.
|
By
Steve N4IRS
·
#9783
·
|
|
Re: DVSwitch Client does not receive
Yes same network. The pi is on a lan port of the router the computer running pyUC and the t320 are using the same Wi-Fi which is direct to the router.
Yes same network. The pi is on a lan port of the router the computer running pyUC and the t320 are using the same Wi-Fi which is direct to the router.
|
By
Gareth GM0WUR
·
#9782
·
|
|
Re: DVSwitch Client does not receive
s the T320 on the same network as the DVSwitch Server?
s the T320 on the same network as the DVSwitch Server?
|
By
Steve N4IRS
·
#9781
·
|
|
Re: DVSwitch Client does not receive
Ok I’ve done that.
but something weird is going on.
with the RX and TX ports set to the same number, if I use the pyUC that works still.
However on the t320 using the android program it now comes
Ok I’ve done that.
but something weird is going on.
with the RX and TX ports set to the same number, if I use the pyUC that works still.
However on the t320 using the android program it now comes
|
By
Gareth GM0WUR
·
#9780
·
|
|
Re: DVSwitch Client does not receive
Use the same port number in TX and RX Change port numbers in Analog_Bridge.ini and match in Android Client.
Use the same port number in TX and RX Change port numbers in Analog_Bridge.ini and match in Android Client.
|
By
Steve N4IRS
·
#9779
·
|
|
Re: DVSwitch Client does not receive
Hi Steve,
no using pyUC or DVSwitch client not trying both at same time as figured that would just confuse the server.
the port settings in pyUC.ini for TX and RX match exactly what’s in the android
Hi Steve,
no using pyUC or DVSwitch client not trying both at same time as figured that would just confuse the server.
the port settings in pyUC.ini for TX and RX match exactly what’s in the android
|
By
Gareth GM0WUR
·
#9778
·
|
|
Re: DVSwitch Client does not receive
Gareth,
Do you have pyUC connected to the server while you are trying to use the Android client? Since you have setup pyUC are you sure you are using the same UDP ports for TX and RX as you
Gareth,
Do you have pyUC connected to the server while you are trying to use the Android client? Since you have setup pyUC are you sure you are using the same UDP ports for TX and RX as you
|
By
Steve N4IRS
·
#9777
·
|
|
DVSwitch Client does not receive
Hi All,
I’m really hoping someone in this group can help me because I’m tearing my hair out.
I’ve followed every version of the instructions I can find, every tutorial on YouTube yet I
Hi All,
I’m really hoping someone in this group can help me because I’m tearing my hair out.
I’ve followed every version of the instructions I can find, every tutorial on YouTube yet I
|
By
Gareth GM0WUR
·
#9776
·
|
|
pyaudio error
While installing pip3 install pyaudio I get errors, I don't know what information you need from me to help troubleshoot, so I'm just going to give you some basics and hope it enough.
MacOS Big
While installing pip3 install pyaudio I get errors, I don't know what information you need from me to help troubleshoot, so I'm just going to give you some basics and hope it enough.
MacOS Big
|
By
Scott-N5HUM
·
#9775
·
|
|
Re: Trying to install and setup DV switch on android
You made backups of the files before you modified them. You can restore the backups if you have a problem. Since you are running ClearNode, I would contact Gerry from ClearNode since he
You made backups of the files before you modified them. You can restore the backups if you have a problem. Since you are running ClearNode, I would contact Gerry from ClearNode since he
|
By
Steve N4IRS
·
#9774
·
|
|
Re: Trying to install and setup DV switch on android
Given the fact that I’m really not sure what I’m doing, and I just wanna make sure that my files are the way they’re supposed to be, is there a place that I could email you my files so you could
Given the fact that I’m really not sure what I’m doing, and I just wanna make sure that my files are the way they’re supposed to be, is there a place that I could email you my files so you could
|
By
Joe Quinn
·
#9773
·
|