|
Re: PLS HELP - private dmr server
Thanks jeff i did try with xlx server but i couldnt get any joy there either
will only be for dmr and hotspots
thanks again mate
Thanks jeff i did try with xlx server but i couldnt get any joy there either
will only be for dmr and hotspots
thanks again mate
|
By
vk2ajb
·
#9815
·
|
|
Re: PLS HELP - private dmr server
Instead of trying to use HB link or DVSwitch, look at configuring an XLX server. It supports DMR, D-Star and YSF out of the box and is much easier to setup, especially if you are not going to
Instead of trying to use HB link or DVSwitch, look at configuring an XLX server. It supports DMR, D-Star and YSF out of the box and is much easier to setup, especially if you are not going to
|
By
Jeff Lehman, N8ACL
·
#9814
·
|
|
PLS HELP - private dmr server
I am at the point where i am about to pay someone to teamviewer into my pc and set this up for me...
I have a private p25 server setup and running well on a remote server but not everyone has access
I am at the point where i am about to pay someone to teamviewer into my pc and set this up for me...
I have a private p25 server setup and running well on a remote server but not everyone has access
|
By
vk2ajb
·
#9813
·
|
|
Re: MMDVM_Bridge Updates
#mmdvm_bridge
Hi
Is possible, using connector with BM and this one with YSF reflector. We have 3 Wires-x connections and an IMRS repeater
Hi
Is possible, using connector with BM and this one with YSF reflector. We have 3 Wires-x connections and an IMRS repeater
|
By
Jorge (George)
·
#9812
·
|
|
Re: MMDVM_Bridge Updates
#mmdvm_bridge
FWIW:
WIRES x bridging would be done over RF using a radio and a hotspot. DVSwitch therefore doesn't care about that part, so long as the hotspot connecting the WIRES x room can talk
FWIW:
WIRES x bridging would be done over RF using a radio and a hotspot. DVSwitch therefore doesn't care about that part, so long as the hotspot connecting the WIRES x room can talk
|
By
Patrick Perdue
·
#9811
·
|
|
Re: MMDVM_Bridge Updates
#mmdvm_bridge
Hi Ben,
I am not handling that part.
Once a week, I use MMDVM_Bridge to connect one of my YSF reflectors (A) to another YSF reflector (B) so that my local club members can participate in a net. YSF
Hi Ben,
I am not handling that part.
Once a week, I use MMDVM_Bridge to connect one of my YSF reflectors (A) to another YSF reflector (B) so that my local club members can participate in a net. YSF
|
By
David - AK2L
·
#9810
·
Edited
|
|
Re: MMDVM_Bridge Updates
#mmdvm_bridge
Hi David,
how do you setup a such gateway between an YSF reflector and a WiresX node ? (or the pc WiresX node i suppose) ?
Thanks
73, Ben
Hi David,
how do you setup a such gateway between an YSF reflector and a WiresX node ? (or the pc WiresX node i suppose) ?
Thanks
73, Ben
|
By
Benjamin ON5BGO
·
#9809
·
|
|
MMDVM_Bridge Updates
#mmdvm_bridge
I'm using a ~2-year old version of MMDVM_Bidge on a Raspberry Pi and have encountered a problem with traffic not going between a YSF reflector and a WIRES-X room.
Are there release notes somewhere
I'm using a ~2-year old version of MMDVM_Bidge on a Raspberry Pi and have encountered a problem with traffic not going between a YSF reflector and a WIRES-X room.
Are there release notes somewhere
|
By
David - AK2L
·
#9808
·
|
|
Re: How to connect to FCS001 27
Mike precede the reflector number 000127 with a 9. So, connect to 9000127 while in YSF mode.
Mike precede the reflector number 000127 with a 9. So, connect to 9000127 while in YSF mode.
|
By
Steve N4IRS
·
#9807
·
|
|
How to connect to FCS001 27
Sorry for the noobie question.
I wish to connect to FCS001 27 but I don't know how to set it up in DVSwitch. Apparently using 176.10.105.218:65000 is not enough. In fact I don't know how to point the
Sorry for the noobie question.
I wish to connect to FCS001 27 but I don't know how to set it up in DVSwitch. Apparently using 176.10.105.218:65000 is not enough. In fact I don't know how to point the
|
By
IK7VXC Mike
·
#9806
·
|
|
Re: Truncated DMR audio
The issue was with the talk group. The system was using an unnamed 5 digit talk group. It appears that Brandmeister found out and shut it down. It works now using a 7 digit talk group.
Danny
The issue was with the talk group. The system was using an unnamed 5 digit talk group. It appears that Brandmeister found out and shut it down. It works now using a 7 digit talk group.
Danny
|
By
Danny Lloyd
·
#9805
·
|
|
Re: Truncated DMR audio
What TG are you using?
By
Steve N4IRS
·
#9804
·
|
|
Truncated DMR audio
I have an allstar link setup with mmdvm bridge (1.63) and analog bridge (1.6.1). I use thumbdv for the vocoder, all running on a RPI 4. I am connecting to 3104 master.
Everything has worked great
I have an allstar link setup with mmdvm bridge (1.63) and analog bridge (1.6.1). I use thumbdv for the vocoder, all running on a RPI 4. I am connecting to 3104 master.
Everything has worked great
|
By
Danny Lloyd
·
#9803
·
|
|
Re: System Builder Script where is Asterisk?!
#analog_bridge
OMG! You're right! Thanks!!
OMG! You're right! Thanks!!
|
By
craig@...
·
#9802
·
|
|
Re: System Builder Script where is Asterisk?!
#analog_bridge
You don't have AllStar installed.
apt install allstar
Steve N4IRS
You don't have AllStar installed.
apt install allstar
Steve N4IRS
|
By
Steve N4IRS
·
#9801
·
|
|
System Builder Script where is Asterisk?!
#analog_bridge
Thanks for reading this, a simple question, where can I find the IAX, RPT EXTENSIONS files when I use the DVSwitch-System-Builder script, yes, I've looked in etc/asterisk but it doesn't exist.
Thanks,
Thanks for reading this, a simple question, where can I find the IAX, RPT EXTENSIONS files when I use the DVSwitch-System-Builder script, yes, I've looked in etc/asterisk but it doesn't exist.
Thanks,
|
By
craig@...
·
#9800
·
|
|
DSTAR TX from ASL comes out as TG 0
When I transmit with my ASL node into Analog_Reflector on DSTAR, the Target is TG 0.
But, if I use the DVSW web client it work properly with ‘CQCQCQ via REF001 E’
This used to work,
When I transmit with my ASL node into Analog_Reflector on DSTAR, the Target is TG 0.
But, if I use the DVSW web client it work properly with ‘CQCQCQ via REF001 E’
This used to work,
|
By
Michael - N5ZR
·
#9799
·
|
|
Re: ASL Using DVSWITCH client on android and Anytone 878 radio
#dvs
#analog_bridge
I have Analog_Reflector working. Lotsa new "stuff" to configure tho. I have used with the HUC client and also on my analog phone with dvs mobile. I have not tried it yet with my analog Radio
I have Analog_Reflector working. Lotsa new "stuff" to configure tho. I have used with the HUC client and also on my analog phone with dvs mobile. I have not tried it yet with my analog Radio
|
By
Stephen Fairfield
·
#9798
·
|
|
Re: ASL Using DVSWITCH client on android and Anytone 878 radio
#dvs
#analog_bridge
https://server.dvswitch.org/documents/Analog_Reflector.pdf
https://server.dvswitch.org/documents/Analog_Reflector.pdf
|
By
Steve N4IRS
·
#9797
·
|
|
Re: DVSwitch Client does not receive
Hi Everyone,
First of all Sorry Steve that this has taken me a while to post. Family medical emergency kept me busy since we were in contact.
Anyway for the benefit of everyone. Thanks to Steve, I can
Hi Everyone,
First of all Sorry Steve that this has taken me a while to post. Family medical emergency kept me busy since we were in contact.
Anyway for the benefit of everyone. Thanks to Steve, I can
|
By
Gareth GM0WUR
·
#9796
·
|