Actually, if he is using DVSwitch Server, he can change to audio level when he switches to YSF in /opt/Analog_Bridge/dvsm.macro: [MACROS] ; Example: When a DVSM user selects the DMR

I could be wrong, but it doesn't sound like Frank is actually bridging to YSF, but rather is just crossmoding to DMR with a C4FM radio. That being the case, there will be no separate option

Frank, You can control the audio level sent from or to digital. Depending on how you change modes you can change levels on the fly. Since you are happy with the level of DMR, I would start

Are you running USRPGain and TLVGain at unity? I've found it helps a lot to turn TLVGain down quite a bit in Analog_Bridge.ini. TLV is the gain sent from analog to digital. This will reduce

I have DVswitch setup DMR>Analog. It pushes a DMR TG to my Hamvoip Allstar node (2 seperate Pi's). When I talk on the analog radio, the audio sounds great coming out of my DMR radio connected to a

If it's keying, it should also sending audio. Check your Vocoders and maybe the audio levels in your AB.ini If sending in one direction and not another, I expect a port issue in that direction.

i do see where dmr does key up p25 and p25 does not key up dmr that much i do know even when dmr key's up p25 no audio is being routed

It's not just about errors. It's about following the data through. Does data enter a component? Does the data leave the component...

ok i'm not seeing any error's in the logs

I run everything in the foreground while testing. Once all works, I have it all start at boot.

ok does the MMDVM start up auto or do i launch it manual making sure i do have everything running

Follow the data through the logs. Send one short transmission and follow it.

here is a copy of the logs

Te questions are what you should be asking yourself as you troubleshoot.

M: 2020-12-29 02:46:42.808 Currently linked repeaters: M: 2020-12-29 02:46:42.809 KC5JMJ : 240.58.230.191:24226 0/120 M: 2020-12-29 02:46:42.809 KC5JMJ : 240.58.230.191:6820 2/120 the

http://bridge.kc5jmj.com P25 : 31337 DMR BM TG : 311995

Like I said, follow the data. Since you are testing DMR to P25. Is MMDVM_Bridge logging into the Master? Do you see the data when a DMR user keys in the MB log? Do you see the data in the

ok i see on the dashboard now when i key dmr it says tx p25 but no audio so i did get that far

Watch the logs as you transmit on one side of the bridge, follow the data through the bridge.

ok it shows the linked but no audio passing and when keying up p25 it does not show up in the dashboard