XLX reflector was originally Dstar and the modules refer to the 26 A-Z modules/rooms from Dstar. These carried over when MMDVM gateways came along!! With my reflector, which had ambe transcoding,

Bill, Since I don't know XLX very well, is module B a DMR connection?

Thanks for coming back to me Steve. I have a TGIF talkgroup I am trying to bridge/connect to module B on the XLX reflector Regards Bill

Are you trying to connect to YSF on XLX or to DMR on XLX

Any help here would really be appreciated. I am trying to link a specific TGIF talkgroup to a specific module of my mutli-protocal XLX refeflector. I already have a YSF room connected using dvswitch,

Thank-you Steve

In Analog_Bridge.ini [AMBE_AUDIO] txTg = 9 ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge txTs = 2

Good morning, read this article with interest as trying to bridge my Allstar node with my TGIF account myself, followed Steve's instructions but getting stuck adding TGIF talkgroup in the TGIF

That was it, I had changed the node number. fixed in the json file and the errors have stopped. Thanks,

Brilliant, thank you! After some sweat and 50 cups of coffee later, I am now up and running! :)

HBlink is your master, Pi-Star and DVSwitch Server are your peers.

Thanks Steve, I've got this installed. Does anyone know if I should point the pistar and DVSwitch to the "master" in hblink config, or do I need to set one of them up as a peer? Thanks & 73, Robert

The error message is returned by your Allstar Node when issuing a RptStatus. Most likely it is because you have misconfigured your node number in Analog_Reflector.json or manager.conf on the Allstar

Michael, Can you post more of the log around the message?

What does “AMI Error: RptStatus unknown or missing node” mean in the Analog_Reflector.log? Thanks, -Michael N5ZR

Robert, Yes, HBlink will do what you need. <https://dvswitch.groups.io/g/HBlink> 73, Steve N4IRS

Hi all, I would like to create a private bridge for my allstar node to DMR (i.e. without using a network). I’d like to TRX on my DMR radio and that bridges across to whatever my allstar node is

Ah, that's an excellent idea. It's been while since I was testing but probably it was broadband noise and most likely around 145 or 435 MHz. Boxing would most likely have reduced or eliminated the

Maybe I don't see it because I have metal boxes for my BBB. What frequency and mode are you seeing interference?

... apart from the RF interference at least some BeagleBone can create..... David GM8ARV -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: