It was the P25 Gateway Voice, Thank you Steve.

I believe that voice message is coming from DMR Plus. MMDVM_Bridge, Analog_Bridge do not speak. Only other program that can speak, is P25Gateway. Since the message is the DMR TG, I doubt that is

Hi, I setup an MMDVM Bridge from P25 to DMR TG 3345, and one from AllStarLink to DMR TG 201, both run on the same Raspberry Pi and connected to the same DMR Plus server (DMR Plus Mexico). Everything

That worked thank you!

When done as my example, it does reroute to TGID 9 for given time period (1 minute). Not that you have to do it that way. hblink is very flexible. You can keep all on 9999 if that is

Would I change the TGID to 9 on the other systems and leave the PARROT on 9999? And do I use 9 or 9999 on the radios?

Just add another SYSTEM line for each in the PARROT bridge. I have repeater(s) on one, duplex hotspots on another, and simplex hotspots on another. Like this:

I would like to get multiple hotspots to be able to use Parrot, but can't seem to figure it out. I can get one at a time working with these rules 'PARROT': [ {'SYSTEM': 'HOTSPOT01',

David, At this time, GPS data does not pass across TLV. Possible in a future revision. Thanks for the comment. It's now on the list. Steve N4IRS

Thanks Steve. In the log snippets below, AK2L was on one YSF reflector and K7VTT was on another. K7VTT's radio reported that AK2L was 3,000+ miles away. When both operators are on the same reflector

Can you post the section of the MMDVM_Bridge log where traffic is passing between reflectors? Steve N4IRS

I have two YSF reflectors connected with DVSwitch/MMDVM-Bridge. They have been active for over 2 years and pass audio just fine. There is a small problem: Location data (Lat/Long) does not cross the

Hi Clarence, Solved problem by using Chrome browser instead of Safari. Hope this works. 73 KD2ALV & HK3DC Dan

I have opened : kc1noc.duckdns.org It opens fine. I click on “RX Monitor “ it changes color blue green &red. But no audio. What is going on

Well. Of all things. Router reboot fixed it. WRT1900 running DD-WRT. GeorgeC W2DB

Hi everyone. I have a hblink problem. It was working perfectly as a link between hotspots. Suddenly stopped. I have two pi-star hotspots that I'm "burning in" before deploying as a kinds "private

Many users logging into the CQ-UK network either by C4FM or DMR+ has great audio. CQ-UK is not connected to Brandmeister. Nice audio via AllStar as well. I thought it was time for me to play around

No idea how to do it on hamvoip but you may be able to use parts of my saved image here: https://drive.google.com/file/d/1fOAaVU5otOh5cwQ5TuO3xBW1goCGgueV/view?usp=sharing It took me a while to get

Hello, I am looking for a guide to get a DSTAR-HAMVOIP (Allstar) Bridge up and running. I have available a Raspberry PI 4 with the HAMVOIP image already installed and configured. I believe the vocoder

How to setup YSF VW Mode in DVSitch to use rooms for the VW Mode (instead the standard DN Mode) BR. Stefan DL1ESZ