Looks AWESOME!!! thanks for all the goodies you guys work on. You all should be inducted to the HAM Radio Hall of Fame!!!! Cant wait to install the dashboard, I tried installing but no packages

Very strange. This is an example of what I observed last night: M: 2020-10-23 04:29:32.253 Linked to reflector 10400 by WB6ZSU M: 2020-10-23 04:39:34.361 Unlinking from 10400 due to inactivity I:

Excellent video sir, can't wait for the rest of the mentioned videos to be available. Thanks, William

I see no reason it would change. It's just that I tested with the current version as shown in the included logs so I know it's working. As far as I know it always worked that way.

Steve, I will try doing this later. Can you think of why this would have changed all the sudden? I have two installations which are now behaving this way. I only realized this because the past few

Greg, You might just get away with replacing the binary. systemctl stop p25gateway cd /opt/P25Gateway mv P25Gateway P25Gateway.old wget

Steve, Here are my results (you can see this is a pretty old install): Greg WB6ZSU

Thanks Steve, this are great news! 73 Carlos KP4CA

Greg, I ran a test here. root@DVSwitch-Server:~# uname -a Linux DVSwitch-Server 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) x86_64 GNU/Linux root@DVSwitch-Server:~# dpkg

Greg, Please run the following as root: uname -a dpkg --print-architecture /opt/P25Gateway/P25Gateway -v Steve N4IRS

Over the past few days I’ve noticed a change in the way the Inactivity timeout works. I have my system configured with a Startup TG of 10400 and an Inactivity Timer of 10 minutes. The way I’m

That would work too, but I think replacing copies of the binaries with symlinks would be easier with my setup.  Would save a lot of rejigging of systemd units. As you say, more than one way to skin

I did forget to mention that the dashboard has a neat feature in conjunction with AB. The audio that AB would send to the USRP ports is also sent to the dashboard. A user can listen to the audio buy

Tony, You can go symlink which may be easier to see and understand. I would suggest a single binary and multiple config files. for example MMDVM_Bridge: in /opt/MMDVM_Bridge you have the

Thanks Steve for the update. I must say the latest MB on GitHub works well now with my Nextion screen NextionDriver combination. Only tested on DMR parrot at present but shows both tx and rx now.

This sounds awesome.  Looking forward to seeing what's in the upgrade.  I'll have to do some manual tweaks, because I have multiple instances of a number of the binaries running.   Might have to

My bad.. I wasn't thinking HamVoip... tried it once, went back to the real deal.

Thanks, Steve. That worked! Richard

His problem is here: See this log entry: [Oct 21 00:46:18] WARNING[2817]: app_rpt.c:21237 rpt_exec: Cannot find specified system node 1998 When he connects to his node from DVSM,

If you're phone is connected to your home router's wireless then you are attempting to connect to IAX on your local network (LAN). Assuming that you have your ports forwarded properly, IAX is