you may need to update it. On 6/6/20 10:25 PM, Nomis Bayan Jr. wrote:

HI Steve, I just found out that there was nothing on the DMRIds.dat. No data. On 6/6/2020 7:24 PM, Steve N4IRS wrote:

Check your /var/lib/mmdvm/DMRIds.dat you may need to update it. Steve On 6/6/20 9:29 PM, Nomis Bayan Jr. wrote:

HI Steve, Could not figure out why the callsign will not show up instead it is the DMR id....it was not like this before when I first started. What I noticed was that I am missing

As in, you have it working now? On 6/6/20 6:32 PM, W8DSB wrote:

Thanks, this is the working example: [DMR Network] Enable=1 Address=68.36.42.150 Port=62030 Jitter=750 Local=62032 Password=passw0rd Options=XLX:4002 Slot1=0 Slot2=1 Debug=0

Daren, I'm very sorry, I missed your question. Thanks Tim for helping! Steve N4IRS

Hi Daren, I just had the same issue. The fix is as follows on the command line as root (or use sudo). wget http://dvswitch.org/ASL_Repository/dvswitch.gpg.key apt-key add dvswitch.gpg.key Cheers Tim

port should be: Port=62030 Also dmr id should only be 7 digit id when connecting to XLX 73, Eric

Enable=0 <------------ Should be enabled! On 6/5/20 10:54 AM, W8DSB wrote:

So if I understand correctly this is the format, it does not seem to work just yet :( [DMR

Type in wrong: should be Options=XLX:4002.....correction... On 6/5/2020 5:37 AM, W8DSB wrote:

Hello, Try Option2=XLX4002 #for module B 4001 - Module A 4002 - Module B 4003 - module C.............etc On 6/5/2020 5:37 AM, W8DSB wrote:

Is XLX:998 B a attempt to connect to "module B" (I'm not much of a XLX person) If so try Options=XLX:9982 On 6/5/20 8:37 AM, W8DSB wrote:

I think I need just a little push in the proper direction. I changed my MMDVM_Bridge.ini to read what you see below however if I watch the XLX it never connects. I tried Options=XLX:998 and

Steve N4IRS, I downloaded this the other day got error "page not found". sorry I cant remember the date looks like a week ago. wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvswitch.sh 73,

MB.ini [DMR Network] Enable=0 Address=hblink.dvswitch.org Port=62031 Jitter=360 Local=62032 Password=passw0rd # for DMR+

All, we have a PI running XLX With interlinks to BM and DV3000 to DStar. I also have a ASL with analog_bridge <> mmdvm <> BM i want to connect our mmdvm_bridge directly to the XLX to reduce lag and

Scott is right when I installed DVSwitch on the arch Linux, I use Pacman. However it doesn’t sound as good as it should. I was inspired this morning and installed DVSwitch On a running allstar node

I am seeing that Buster has been renamed to Raspbian Buster, is that the one to use to start the process of setting up DVswitch? Dick W4RSS