root@dvswitch:/opt/TriState_NXDN/NXDNGateway/log# cat NXDNGateway-2020-01-28.log M: 2020-01-28 02:15:05.762 Opening Icom connection I: 2020-01-28 02:15:05.762 Opening NXDN network connection I:

In NXDNGateway.ini in the [General] stanza Debug=1 transmit through the bridge and see waht the NXDNGateway log shows.

Last entry. #NJTRBO TriState 31360 127.0.0.1 41400 I do see the Gateway register with the reflector: M: 2020-01-27 22:50:03.528 Adding N2WNS (127.0.0.1:14050) M: 2020-01-27 22:51:42.031

Do you have an entry for 31360 in /var/lib/mmdvm/private_NXDNHosts.txt

I tried to add them as TXT attachments and they wouldn't post. Here they

Bill, I forgot to ask for your MMDVM_Bridge.ini and the NXDNGateway.ini Steve

M: 2020-01-27 22:50:59.890 Opening Icom connection I: 2020-01-27 22:50:59.890 Opening NXDN network connection I: 2020-01-27 22:51:00.924 Loaded 49 NXDN reflectors I: 2020-01-27 22:51:00.925 Loaded

Bill, Here is what I want you to do: stop MMDVM_Bridge Stop NXDNGateway delete the MMDVM_Bridge log in /var/log/mmdvm delete the NXDNGateway log in /var/log/mmdvm Start

Yes sir it is: [NXDN Network] Enable=1 #LocalAddress=127.0.0.1 Debug=1 LocalPort=14021 GatewayAddress=127.0.0.1 GatewayPort=14020 I enabled Debug to see if I could see anything else. Everything

Take a look at [NXDN Network] stanza in MMDVM_Bridge.ini and make sure NXDNGateway is running.

I’d suggest submitting patches to the actual ASL project, much more likely to be added in and you’ll also get credit for your contributions. Sent from the iRoad

Hello Mike, Yes, I got it working. I went with the HamVoIP v1.5 image ( which is a fork of Allstar's Raspberry Pi image) which uses the Arch Linux distribution. The

I'm bridging DMR to NXDN and I don't see the traffic hitting NXDNGateway: M: 2020-01-26 21:29:39.654 NXDN, Setting [NXDN] Address -> 127.0.0.1 M: 2020-01-26 21:29:39.654 NXDN, Setting [NXDN] TXPort ->

Here have v5 update OTA until V8 http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/ And also versión virtualbox V8 DVLINK. With server

I'm not as familiar with the conventions of Arch Linux as I am with Debian. Did you install from a package (I think there is one in the HamVoIP repository,) or did you put everything in

yes it works. I have DMR bridge on hamvoip image. check out 314651 dmr tg allstar 45743or echolink 275408 Brad N8PC

David, did you get this running? I want to add a DMR bridge to my HamVoIP install but ran into obviously issues with dependencies. Mike

Hello All, I have installed Jaoquin’s v2 DVSwitch Server image on a R Pi 3+ and have followed the setup instructions. The YSF mode works flawlessly, however I can’t seem to have any luck receiving

give this a try in the mean time: https://docs.google.com/document/d/1aFIHNFfJ58mW1psD1Wnp-cSkaEc28A2o1sPE7ZVrQfI/edit?usp=sharing

Thanks Steve. This works as expected.