This is off the top of my head, I do not have a test platform I want to try it on. Do pay attention to the fact that each SYSTEM in hblink.cfg has a different SSID appended to the DMRID.

I would actually have to sit down and write one. I have done it with DMRlink and it's bridge. I think you want to ask in the HBlink subgroup.

Hi Steve. Can you help perform this process. Mic In SoundCard or Inline -> USRPAudio.py (with vox control) -> Analog_Bridge -> md380_emu -> MMDVM_Bridge -> DMR. To use it for example to broadcast news

Thank you Steve for your reply. I’ve tried that and it does not work. It only sends traffic to one of the BM talkgroups, and sometimes the other talkgroup gets some “blips” but never gets any

I don't know of any reason you would need to "double vocoder" Everything I see is either AMBE or analog. I also don't see why you can't have multiple connections to BM: [TG-1] MODE: PEER ENABLED:

The thing about openbridge is I have to find someone at BM, and I've always had a hard time dealing with them and getting stuff to work, then it is a permanent connection, not something I can

Florian, I ran into something like this previously. What happened for me was the CPU was v6 and the code is compiled for minimum of v7 architecture. Instant segfault. If you run a debugger on it

Dear folks, I am trying to rund MMDVM_Bridge on a RPi 1B with Debian Buster. The binary exits with a Segementation Fault right after start. Nothing else on the screen/console. Is this binary not

Yeah I realized that after doing research after I already posted the question. I won't bridge TGIF in, I've never even messed with TGIF before. So what is different between OpenBridge and the bridges

p.s. you can never bridge any BM TG's and TGIF TG's together. they must remain autonomous of each other in your bridges.. Alec

Use Open Bridge in HBlink.cfg. Submit a support Ticket to BM and give them the TG's you want from BM. These will then always be avail on TS1 once the bridge is made. provide ip of your hblink,

Hi Steve, nothing really. The second I transmit into the FCS reflector via another route, MMDVM_Bridge bombs out. loglevel=1 I: 2019-10-24 15:04:39.512 Started the DMR Id lookup reload thread M:

I forgot to mention that the XLX reflector is connected to DMR through an interlink, if that matters.

Peter, Thanks for the report. Can you show what was in the log before the crash. Steve N4IRS Sent by smoke signal (AT&T)

Hi all: I am using XLXD and ambed with two ThumbDV's to bridge DMR to D STAR. XLXD is on a VPS, and I have a box in my apartment with the physical vocoders. Currently, the transcoding is done by XLXD

I've been experimenting using two instances of MMDVM_Bridge to connect a YSF reflector to an FCS reflector. This is the setup FCS <> YSFGateway <> MMDVM_Bridge <> MMDVM_Bridge <> YSFReflecor All

Tony, Analog_Bridge supports the NW Digital Radio PiDV™ (formerly DV3000) and ThumbDV. You can also use AMBEServer for hardware. Analog_Bridge supports md380-emu for AMBE and built in P25

Good Morning: I have this situation and after hitting everything I will appreciate any advice: I'm trying to use physical ambe3000 installed on a arduino 2560. this setup works perfect on Win-Bluedv

Also, nevermind / just kidding on the TGIF. Pretend I didn't say that

I have a need to bridge in another DMR brandmeister talk-group into an HBLink DMR server. This is to connect a Colorado repeater network to a weather net, and I have permission on both talk-groups. I