you can go here: https://register.ysfreflector.de

Did I miss something in the process? apt-get install mmdvm-bridge Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package

I'm new to this so indulge me. How do I get a YSF reflector address? What port do I use? Do I need to redirect that port in my router to my Pi? Virus-free. www.avg.com

Ahh, gotcha… I failed to notice that the GatewayAddress=ysfreflector.dvswitch.org line, as that needs to point to my YSFreflector address. Thanks a ton for the help on that..

note you may need to log into the brandmeister.network for the repeater id you used and make the talkgroup static.

[System Fusion Network] Enable=1 LocalAddress=0 LocalPort=3200 GatewayAddress=ysfreflector.dvswitch.org GatewayPort=42166 Debug=0

that is located in the MMDVM_Bridge.ini in the same folder.

Many thanks for that Russell. I think I see in the file where to put the DMR talkgroup, which appears to be the ExportTG field. But where do I put the YSF Reflector name/number?

As rootcd /tmpwget http://dvswitch.org/install-dvswitch-repochmod +x install-dvswitch-repo./install-dvswitch-repoapt-get updateapt-get install mmdvm-bridgethen go by the guide for

All you need is mmdvm_bridge and this guide: https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow

OK. I'll just throw another dongle on a Pi then. Thanks.

Patrick, Analog_Bridge does not support ambed. Just ambeserver or direct connect. Sent by smoke signal (AT&T)

Hi: I'm setting up a bm > ASL bridge with MD380_emu for now. I have a box with two ThumbDV dongles connected via ambed to my XLX reflector, which has an existing bridge to Brandmeister. DVSwitch is

That was the other reason I built for armv6

Steve Thank you for version armv6 and now I can run MMDVM_Bridge/Analog_Bridge on Raspberry Pi ZERO W with Raspbian. 73 Waldek

Hi Steve, oh, I didn't expect that to happen so I ordered a RPi2B on Friday :) I will give it a try on the RPi1B and report. mni tnx es vy73 de Florian DF2ET

Steve, If I am understanding DVSwitch correctly, it appears there may be a couple ways to do some things from what I have seen. I am specifically looking for the simplest way to bridge a DMR

I have built Analog_Bridge on a Pi 1 (armv6l) It is in the github repository at <https://github.com/DVSwitch/Analog_Bridge> 73, Steve N4IRS

Florian, I have built MMDVM_Bridge on a Pi 1. (armv6l) Give it a try on your 1B It is in the github repository at <https://github.com/DVSwitch/MMDVM_Bridge> in the bin directory. We have no plans at

Peter, Please post or e-mail the MMDVM_Bridge.ini that connects to FCS. Thanks, Steve