Good Morning: I have this situation and after hitting everything I will appreciate any advice: I'm trying to use physical ambe3000 installed on a arduino 2560. this setup works perfect on Win-Bluedv

Also, nevermind / just kidding on the TGIF. Pretend I didn't say that

I have a need to bridge in another DMR brandmeister talk-group into an HBLink DMR server. This is to connect a Colorado repeater network to a weather net, and I have permission on both talk-groups. I

success!!! Thank you very much Russel 73 de Pat W3PO in the Philippines for the winter.

Well thank you Russel I will try with vnc viewer. Never used it before but I think I can figure it out. 73 de Pat W3PO

i got mine working by using VNC Viewer to see the desktop then run this in a terminal window sudo ircddbgatewayconfig it took about 3-4 minutes for this to come up for me. it wouldn't let me do it

hello all update DMR works but I have the same issue as KV2S on Dstar. No problem on rx but nothing is transmitted. when on DVswitch mobile the app shows transmit and the ptt is red plus the timer is

Hello, Does this require dongles for transcoding? I ask as I get perfect audio from DMR to DSTAR without them but no audio from DSTAR to

I have built a NXDN to DMR bridge using the NXDN Reflector, NXDN Gateway and the MMDVM Bridge. I'm getting a weird error in the logs. Folks on DMR can hear the NXDN Reflector but nothing comes back to

Thank you very much Joaquin , Yes I confirm the information was entered correctly. the DVstick 30 transmit fine on C4FM, NXDN and P25. Dmr and Dstar are the only issue. The only issue which nags me

When using the DVStick30 configuration, you will have to set baud to 460800. Check it out.

Hello gents With the image and DVswitch mobile all modes work well. Unfortunately DMR and Dstar receive well but no transmit whatsoever. I am already registered with DMR and US trust so what could it

Hi Mike and Steve Is it known when you can expect a version of MMDVM_Bridge that will allow you to connect to XLX with selected module? (Options = XLX: 4003) I also read in

That is why the flow is so important especially when transcoding IMBE to AMBE.

I think I need to get my eyeballs checked or learn how to spot check my configs better LOL. I'm all good now. Thanks Steve :)

MB: M: 2019-10-16 22:08:24.361 DMR, Setting [DMR] TXPort -> 31100 M: 2019-10-16 22:08:24.361 DMR, Setting [DMR] RXPort -> 31103 AB: M: 2019-10-16 22:08:13.385 Setting [AMBE_AUDIO] txPort ->

I made that change. Was able to connect to DMR now. Keyed up. Here are the results. Still nothing coming over the AB's

1: I see no attempt at traffic from DMR 2: You have P25 MB and P25 AB on the same ports; MB: M: 2019-10-16 21:39:16.437 P25, Setting [P25] TXPort -> 34100 M: 2019-10-16 21:39:16.437 P25, Setting

Here's the logs you requested. I only have one instance of MMDVM bridge

Jake, A DMR to P25 bridge will look like this: BM <-> MB_DMR <-> AB_DMR <-> AB_P25 <-> MB_P25 <-> P25Gateway <-> P25Reflector You can use one instance of MB for both DMR and P25