You can ignore that.

When MMDVM_Bridge is starting up I see error cannot open RSSI Data file

Then the problem is in the [System Fusion Network] stanza. Again, this should help <https://dvswitch.groups.io/g/main/message/4133> Steve N4IRS

If I might suggest using VUTR.com Cheap reliable and no custom headers and you can load your own ISO But I suggest you use DEBIAN especially if you are running or think you might

Ok, I think we need to see a full copy of all the config files, the command executed and all the logs that you're getting. I mean, we're getting the results piecemeal here and I'm trying to follow

Disabled DMR problem persists

So, The question is, what network is causing the issue. By disabling one network at a time you can narrow it down. I also suggest you read <https://dvswitch.groups.io/g/main/message/4133>

Disable DMR network and retest Sent via smoke signal (AT&T)

Yes i can ping tgif.network successfully

Ok I changed from domain name to IP but the issue is still there

Can you ping TGIF network? Sent via smoke signal (AT&T)

[DMR Network] Enable=1 Address=tgif.network Port=62031 Jitter=360 Local=62032 Password=passw0rd Slot1=1 Slot2=1 Debug=0

Also, if you are connecting to the TGIF network, the address is tgif.network make sure that is correct as well.-- Jeff Lehman, KC8QCH E-mail: kc8qch@... Hamshack Hotline: 4218 Webmaster Hamilton

Check your MMDVM_Bridge.ini to see if you used a domain name for DMRNetwork instead of the IP. If true, switch to IP address and try again. -- Steve Miller KC1AWV

That is a IP error. Please post your [DMR Network] stanza from MMDVM_Bridge.ini

I dont want to be a pain but this is what happens when i run MMDVM_Bridge : 2019-06-18 19:10:16.804 Error returned from sendto, err: 22 2019-06-18 19:10:21.811 Error returned from sendto, err:

<https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow>

Yes, In the [YSF} stanza under Export TG

and where do i put the TG number ? Does that go in the DVSwitch.ini

Yes you do.