For explanation of exit status 8 - that's an exec format error according to errno. Could be the package you're installing is for the wrong architecture, such as trying to install a package for ARM on

Need more info. how are you installing DVSwitch? Are you using the DVSwitch-System-Builder script? Only references to dvswitch-base I can find is in ASL, not DVSwitch.

Help. It report it error when install dvswitch: Selecting previously unselected package dvswitch-base. (Reading database ... 42595 files and directories currently installed.) Preparing to unpack

Hi everyone, Since I do work testing and developing systems at work, I use vagrant a lot. It helps me build test virtual machines and provision them quickly to test out things. Sometimes, I need to

Hi for DMR to P25 via DVswitch you can reference this blog http://blog.927.org/node/1

Hi Just to update the group, I managed to get this working perfectly using a MMDVM duplex hotspot (UHF) with a Orange Pi zero and a MMDVM modem pcb attached to a GM360 VHF and Raspberry Pi 2. I also

Thanks, I got one here I run. I'll test and let you know what I find! -- Steve Miller KC1AWV

Here's hoping you are able to figure it out! If you need an XLX to test with, feel free to use XLX020 E. 73, Dan

Ok, unless someone else can provide clues as to what might be happening I may have to lab this and go through the steps again to recreate and solve. I plan on restructuring the system I run here this

As a matter of fact I bought two new cards. The second I plan on being a clone.

Steve: I changed the repeater id in Analog_Bridge.ini to 1234567 as you suggested. After restarting all the involved processes, my test results were unchanged.

Glad to hear it! I would suggest to take an image of the known good card and back it up safely somewhere so you can slap it on a new card if this comes up again. But that might just be the paranoia

Daniel, I've had the same issue myself before. I'm trying to remember exactly what I did to rectify the problem, but it's been a while since the last time I played with the configurations here. One

Thanks again for everybody's help. I bought a new SD card and got it reconfigured and working again. 73 de K4VL Virus-free. www.avg.com

Just to clarify the diagram below, the md380-emu hangs off the Analog Bridge...should have used a fixed font.

I am trying to gateway ASL to XLX DMR. Here is a diagram of what I have implemented. Cloud Server 1 ASL Asterisk (Pvt Node and Public Node) <===> Analog Bridge <===> MMDVM Bridge <===> DMR Gateway

Root is using 12% and tmpfs is using 11%

Just a thought, When you sat up this pi, did you expand the file system after installing the OS? What does df show for disk usage? I am thinking that you may be out

Thanks I will test that out on my new sdcard this evening. Virus-free. www.avg.com

SFTP is an FTP protocol that uses encryption over the wire. So, yes you'll need to have an FTP server running to use FTP. However, WinSCP also can use SCP which only needs an ssh server running, which