Analog_Bridge I: 2019-01-26 00:48:46.569 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018 I: 2019-01-26 00:48:46.569 Copyright (C) 2018 DVSwitch, INAD. I: 2019-01-26 00:48:46.569 Created by

It does not matter, but I would start MMDVM_Bridge first and make sure it is logging into the master.

Should I start either of them first or does it matter?

I don't see anything wrong. I would try the same test with each program running in the foreground.

I: 2019-01-26 00:24:42.340 MMDVM_Bridge: I: 2019-01-26 00:24:42.340 Portions Copyright (C) 2018 DVSwitch, INAD. I: 2019-01-26 00:24:42.340 Hacks by Mike N4IRR and Steve N4IRS I: 2019-01-26

Show me the same thing for MMDVM_Bridge.

I: 2019-01-26 00:19:21.009 Analog Bridge Version 1.1 Wed May 30 11:50:28 EDT 2018 I: 2019-01-26 00:19:21.009 Copyright (C) 2018 DVSwitch, INAD. I: 2019-01-26 00:19:21.009 Created by Mike N4IRR and

I just restarted the computer. The file shows the change.

Also MMDVM_bridge still losing connection to the server. Is there some kind of software I can run to monitor the network traffic from that computer to see if I have an network card issue?

I have both of them running in the foreground and there is not movement on the analog_bridge when the MMDVM_Bridge has activity.

I just tested your IDs See below. I: 2019-01-25 23:53:22.257 Analog Bridge is starting M: 2019-01-25 23:53:22.257 Setting [MACROS] DMR -> /opt/Analog_Bridge/analog_bridge.sh

No. Stop the analog_bridge service if it's running. Make sure it is not running. ps ax | grep Analog_Bridge now cd to the Analog_Bridge directory ./Analog_Bridge

This is from the MMDVM_Bridge [General] Callsign=K4VL Id=3116280 Timeout=180 Duplex=0 Th ID in here is the same as the GatewayDmrID in the Analog_Bridge. Is this the problem?

Set the repeaterID to 1234567 and retest.

This is what I have in the Analog_Bridge.ini file [AMBE_AUDIO] address = 127.0.0.1 ; IP address of xx_Bridge.py txPort = 31103 ; AMBE frames from

OK so can you give me some guidance as to where I have these entry's the same? I am looking and cannot find it.

repeaterID can not be the same as gatewayDmrId

That would help.

I just noticed this when starting Analog_Bridge I: 2019-01-25 23:24:10.846 Analog Bridge is starting F: 2019-01-25 23:24:10.846 Repeater ID can not be the same as subscriber ID

No, It sets up like any MMDVM hot spot.