Morning, I was wondering how to block node from a p25 bridge.

Frank, Let me see if I understand your request. You have a AllStar node connected to your club TG so that analog users can talk to DMR users. During the net, you want your analog users

Hi Everybody! I hope all is fine for you! A little question. How I can do to make a TGWhiteList on my DVSwitch Server? Best Regards!!! 73 IZ1XBB

Why not use the repeater function in your anytone 578UV mobile. Works great here. Gerry

It's been a while since I visited the forum, My DVSwitch has been up and running fine for some time now. I have my DVswitch connected to bransmeister with a target TG of my radio club (no repeater

The IP Address from IP Chicken is what you put in your mobile/portable device. The port you have to open/map/forward is for your raspberry pi or whatever you are using as your server. That port is

thats my goal. thanks for the reply. If i sort it, ill have to do a video on how to do it. there is virtually nothing else ive found online on how to do this. someone has given me pointers on what

the ip chicken gives the ip address and the remote port address. is that the port address i should use on the router?

thank you. ill give that a try. its new to me but will try already done the static ip address, that was easy

You need to assign the device that is the server a static IP address on your LAN. example: 192.168.1.20 Open the port you have assigned your DVSwitch server to use. You do that in your router. It

hello, im new to using the dvswitch server. i have it running well on my home network, but would like to set it up for mobile use on a network radio using my phone as the internet hotspot. I'm not too

Leave your server at home. Open port in router. You will need to know current ip address of router. Connect to it via your phone and Dvsm. Get Outlook for Android

Hi, I have a dvswitch server setup on a raspberry pi 3. I've set the the static ip address. It's working fine on my home WiFi. So the question is How do I make a connection to the pi3 dvswitch server

I figured out the problem, by filling LocalAddress with 0, this prevents MMDVM Bridge from complaining. Before: [System Fusion

I have a setup with ASL --> MMDVM_Bridge--> YSF Gateway. I am using ports 4201 / 3201 to communicate between MMDVM_Bridge and YSF Gateway. I am getting a substantial amount of error messages as

I can try to help. What are you trying to do? what have you done so far? What is working? I had to run a separate instance of MMDVM bridge. I started with a working ASL <> DMR setup. I then Added

BTW, the demo server is on 64 bit.

Send it direct.

Best I can do is send me the IP. username and port. I'll try it from here.

I thought looking at the ASL CLI might be useful but it shows nothing.from my phone. The host is exposed to the internet and has no issues from authorizednodes connecting ( I run a private node). I