main@DVSwitch.groups.io

Re: DMR to USB Audio

while True: ch = getch() print 'PTT:', ptt, '\n' if ord(ch) == 32: # 32 is spacebar ptt = not ptt if ord(ch) == 101: # 101 is 'e' character, like

By Apostolos Kefalas <sv1ljj@...> · #3502 ·

Re: Problem Description: No Audio @ P25 radio, No Audio DMR from Bridge P25 <<-->> DMR

Ray, Can you include the Analog_Bridge logs? Also, turn off debug for now. Steve N4IRS On 3/5/2019 3:29 PM, Ray Harden wrote:

By Steve N4IRS · #3501 ·

Re: DMR to USB Audio

I'm going to let mike take this one. I have not used the Python script yet. (need to) On 3/5/2019 3:28 PM, Heiko DL1BZ wrote:

By Steve N4IRS · #3500 ·

Problem Description: No Audio @ P25 radio, No Audio DMR from Bridge P25 <<-->> DMR

After considerable searching the records here I have not found a solution - The five modules (Reflector, P25Gateway, Analog_BridgeDMR|P25, MMDVM_Host) are all running in their separate terminal

By Ray Harden <w0ray@...> · #3499 ·

Re: DMR to USB Audio

ok, if I press SPACE I see on screen "transmitting" but nothing was transmitted. If I set ptt = True in the python-script the transmit starts if the script start ?!?

By Heiko DL1BZ · #3498 ·

Re: DMR to USB Audio

I believe if you have a app in the foreground you can use the spacebar. On 3/5/2019 3:06 PM, Heiko DL1BZ wrote:

By Steve N4IRS · #3497 ·

Re: DMR to USB Audio

Yes I found the problem by myself :) I installed all from the DVSwitch-System-Builder.sh . In this installation the default config for analog_bridge.ini the default ports were: [AMBE_AUDIO] server =

By Heiko DL1BZ · #3496 ·

Re: DMR to USB Audio

Hello Heiko, from MMDVM_bridge you are sending the audio to port 31100 M: 2019-03-05 16:19:01.648 DMR, Setting [DMR] TXPort -> 31100 but Analog_bridge is listening on port 31000 M: 2019-03-05

By Apostolos Kefalas <sv1ljj@...> · #3495 ·

Re: DMR to USB Audio

You should see corresponding log entries for Analog_bridge when this traffic is coming through MMDVM_Bridge. M: 2019-03-05 16:23:34.717 DMR Slot 2, received network voice header from

By Steve N4IRS · #3494 ·

DMR to USB Audio

I have a running config with analog_bridge and mmdvm_bridge: HB_confbridge <->MMDVM_bridge<->analog_bridge->USRPAudio.py->USB-Soundcard as testing for output analog audio/monitoring from dmr-source

By Heiko DL1BZ · #3493 ·

Re: BrandMeister to XLX

My apologies, I forgot that the DMRGateway service file is not included with the distro. Put this in a file on /lib/systemd/systemctl/dmrgateway.service [Unit] Description=DMRGateway Service #

By Steve KC1AWV · #3492 ·

Re: BrandMeister to XLX

Hi again Steve KC1AWV. Yes you understoood my previous message fine, i have used you tutorial but i have encountered a slight problem at the very end. When i "systemctl enable dmrgateway.service" i

By John MI0AAZ · #3491 ·

Re: BrandMeister to XLX

Hi John, I assume that you mean me, Steve KC1AWV not Steve N4IRS. There's too many Steves out here. From what I gather, you're trying to transcode on an XLX reflector using a PiDV. That's out of the

By Steve KC1AWV · #3490 · Edited

Re: looking at my options

Kevin, I built and tested the first two reflectors and the problem was seen on the third but it seemed intermittent and I moved to the 4th reflector and that didn't work and then 3 seemed to stop

By Mike AE4ML <mike.lussier@...> · #3489 ·

Re: BrandMeister to XLX

Hi Steve. I have a NW Dig Radio PiDv hat which i would like to run here at home as an AMBEServer linking to my online virtual machine where i have installed the ambed software using the info in the

By John MI0AAZ · #3488 ·

Re: looking at my options

yes

By Mike AE4ML <mike.lussier@...> · #3487 ·

Re: looking at my options

Just out of curiosity the 2 reflectors that dont work are they the ones with ports ending in 20 & 30? Were you trying to access them with a pistar setup?

By Kevin N9OIG · #3486 ·

Help Building Bridge from Ground up

Folks, My system was built and for the most part maintained by the late K4SQI. Whenever there was an issue Steve would log in and rectify whatever needed tweaking. Most of the time and he would leave

By Kevin Halton · #3485 ·

Re: looking at my options

Well, What I thought was working has turned out to be a 50 - 50 deal. 2 of the 4 reflectors work the other two dont work. I can't find a problem in the configs I have gone back to my matrix and

By Mike AE4ML <mike.lussier@...> · #3484 ·

Re: DMR to analog gateway questions: Avoid ASL for analog linking, DV3000 vs md380-emulator for quality, local linking when Internet down, everything on one BBB

On 3/2/19 8:50 PM, David Ranch wrote: The only AllStar node that I know of that supports IRLP is HAMVOIP. You could interconnect the DMR <-> ASL bridge at a HAMVOIP node, but the

By Steve N4IRS · #3483 ·

Messages