What you pasted did not have a space. In any case use: pip install dmr_utils

Yes I typed the period after the command, that is what I pasted below, and the resulting error.

true, I keep forgetting that. I'll change the script.

First off, “pip install dmr_utils” it’s on Pypi now.

The full command is pip install --upgrade .   <---- notice the period

OK I did a copy/paste of the line, as I did last time, and it works now. Maybe a network hiccup, who knows. The complete set of instructions I was trying to run is this: apt-get install python-dev

Jason, I just tried to git clone. I did not get a request for password. I would suggest you retry.

Hi All I tried about a year ago to get this DMRlink - HBlink system setup, but never could get it going. I am trying to revisit this plan. I have a box running Ubuntu 16.04 and I have the correct

So, it sounds like P25 is working all the way to Analog_Bridge. It also sounds like you have a problem with Analog_Bridge for DMR. Are you using the emulator? Is the emulator

Ian, Did you miss installing on your new box, or have you got the wrong ports setup for the MD380emu? 73, Peter

Hi Steve, OK here is what I have been able to achieve, P25Gateway runs fine, I can then start MMDVM_Bridge and it connects to the BM Master successfully, I can TX on both the P25 radio and the DMR

Thanks Steve. ------------------ Regards Ian (VK2HK)

You are right, 4 config files. I just counted the programs in the diagram. MMDVM_Bridge is a single instance.

Hi again Steve, just quickly looking back on your reply, you say 5 instances of the shell, OK, P25Gateway MMDVM_Bridge Analog_Bridge_P25 Analog_Bridge_DMR What is the other one, should there be

Thanks Steve, I will look again and follow those instructions, I feel I have just done something silly that I have not been able to see as yet. I have to go out so a break will be good and I may pick

Ian, You are correct in your diagram. You are talking about 5 config files. Rather then search through 5 files, start at one end and work to the other. Run each program in the

Hi and a Happy New Year to all. OK, I have done something very silly, I am trying to build a new server that will be the P25<-->DMR Bridge. I had one working but needed to move it to a new server and

https://www.gofundme.com/k4sqi-steven-d-blackford-steve/

Jeff another option... to expand on what Cort suggested. I have been using BM, IPSC, IPSC_Bridge and HB_Bridge for a little while now. I have a repeater in So Texas and talk with the guys

Brandmeister speaks IPSC also. If the goal is really just hooking up one Motorola repeater (via IPSC) to BM and DMR-MARC, then confbridge.py out of DMRlink is all that’s necessary. 3 IPSC