Not yet. The basics are the same for all the modes. You will need to use different port numbers where there are conflict. For example, the USRP channel driver settings in rpt.conf will need to

OK great are there any docs or other groups with information about setting up D-Star and C4FM?

I assure that the blocking of Steve was not intentional. I appreciate everything Steve stands for and has done for the TGIF group. This is the first I have heard of this. Ty who does much of the work

You will need another ASL node. But you should be clear on terminology, an ASL server can host multiple nodes. So, yes, you will need (want) another node, but you wont need another server.

I'm sorry if this has been covered already. I have set up my DMR bridge and all is well. I would like to try to bridge D-Star and C4FM into my ASL node too. I was wondering if I could do this on the

That is a shame to see that. I hope it was a glitch. After all, that is what this stuff is all about. Un-fragmenting our networks. Chris

There has been some traffic lately about bridging modes to established Masters (Servers) and Talk Groups. Simply put, DO NOT just drop a bridge on any TG without checking first. I can understand

Started playing with the pieces here to put together our own little network cluster with bridges to the outside world. Got hb_confbridge working fine to our current BM cluster TG. Can not get parrot

Hi All, Moving forward with just enough knowledge to be dangerous. On the test bench I now have a working master server with a repeater that attaches, listening on 54000 I also now have a working

Thanks for the reply Cort. consider this thread closed due to finger trouble. I've recloned from the github and now have a working master, and a separate working parrot Still having an issue

As a follow up to this. The US BM masters owners just talked about this and Zello is NOT to be used on a US BM master . This is the first and last warning anyone will receive and will be added to

I want to be very clear on this: We are NOT interested in working on a interface to Zello. Not now, not ever. Please stop asking for it here. I will delete any thread on this subject. I will moderate

Calls do come in from other talkers, and audio is outputting to the soundcard. The "Ignore TX" issue is not a blocker for me, although I'm still curious. I did need Steve's advised latency timer fix

Anyone experienced this Ignore TX condition with Analog_Bridge before? I: 2018-10-19 21:43:01.111 Begin TX: src=3153682 rpt=13153679 dst=9 slot=2 cc=1 I: 2018-10-19 21:43:01.611 Ignore TX:

It would have been handy to have included full debug log traces from both peers and the master if you want someone to try and figure out what’s going on. Common reasons for registration problems

I'm attempting to add a second IPSC peer to an existing peer group and finding that when the two peers attempt to register with each other, it's not working. In addition, after a while, they drop

Success I just talked to a friend in England. He was on DMR and I was on an analog handheld. Thanks for everything you guys do making this successful

OK thanks for the howto. I just went through it and made changes to reflect the howto. Unfortunately I just ordered a DMR radio and can't test it out my self. I will have to wait for some of my

Many thx. always grateful

The telemetry should be off. Its is set when you are setting up the Private node (Node 1999, in the example documents) [1999] rxchannel = USRP/127.0.0.1:34001:32001 ; Use the USRP channel driver.