Hoseline is a totally separate service and is not part of a master server. The masters only send the audio to hoseline. Hoseline is managed overseas and the master owners do not have access to

Mark N2NUO is working on fixing 3108. It failed about 2 hours ago and he is working on resolving the issue right now. Corey N3FE

It just came back up but I cannot hear my audio coming through hoseline anymore

I concur, we have 4 machines pointed at 3108 and they're all offline.

server = 127.0.0.1 ; IP address of xx_Bridge.py fromDMRPort = 31100 ; AMBE frames from xx_Bridge (should match "toGatewayPort" in xx_Bridge.cfg) toDMRPort =

3108 has been off line all night, as as of one hour ago as well....

THat is what I am asking. What about the id you are using to connect to 3108 so I can look in the logs.

Sorry I am new at this and don't understand your question. I have it set to go through Atlanta 3108 if that is what you mean.

Yes I see that. I just verified that as well as your account creation on 10/10/18. What master are you connected to that you are having a problem?

Correct it is node making it to me. The only thing that I get on my end is my repeater keys and unkeys. On hoseline I hear them garbled.

I am using repeater ID 310286 which is registered to me.

right now Brandmeister shows I am not connected and I get an error message when I try to add my talk group. A pop up says Error 500

Are you saying that someone remote on DMR (not through the bridge) sounds garbled on hoseline?

IF the DMR audio is garbled on both your ASL and by listening on hoseline then you won't fix it in software. That is either a problem with your connection to the master or the other users on the dmr

I don't think this is off topic at all, though Corey is you would create a new topic on this subject, I'll make it sticky. We need to stress this. Steve

The garbled audio comes from the DMR user. I have had users from other areas try. (England and 30 miles away). The settings you had me look at are the same as advised. I adjusted the gain to .2 Is it

I would like to take this a little off topic and am going to put on my BM admin hat for this... Please don't just pick a talkgroup and start using it. In the last two days I have blocked 5

"I have my Allstar node setup with everything and can hear myself great on hoseline. My problem is that when someone tries to connect to me on DMR I get a kerchunk and no audio. When I monitor

Try adding this setting USRP] aslAudio = AUDIO_USE_GAIN agcGain = -5 dmrAudio = AUDIO_USE_GAIN dmrGain = 0.2 <-------------------------- ZERO POINT TWO

After looking closer it is -5 (remoting in not the best)