Make sure all of your firmware is updated everywhere. I'm not as familiar with the MMDVM setup, but with CBridges and repeaters, outdated firmware will behave as you are describing.

I was looking up your DMRID and I do not see that there was a DMRID issued to you. If you do have one, supply us with the info0rmation and the server you are trying to connect to and we

Any errors? Is it a program error or is tuenmaster not letting you connect. We really need something more to go on. Corey n3fe

mmdvm bridge not staying connected was last night now it keeps opening and closing

DRAWS - Raspberry Pi HAT [The boards will be run in the next couple of weeks, this is an opportunity to order early and save $20 on the board, and $5 on the GPS LNA Antenna] HW Features: Operating

Cheers Cort, didn't want to bug you on retired stuff, and wondered if anyone else had brute forced their way through it :) I'm informed that GPS is delivered as a kinda SMS to a router with a link to

You could just ask the guy who wrote it… ‘cause you know, he’s on this list too. I would not trust the data routing routines in bridge.py. They were never completed, and may kinda work, but have

All, Before I run off down the rabbit hole, has anyone proven that the bridging of Private_data packets works under DMRlink? I can see the code is there for the packet type callback in bridge.py,

Ok, Many thx Steve.

That is a correct layout of the software. You can use md380-emu for DMR decode / encode OP25 does P25 Decode / encode It is built into Analog_Bridge. Nothing external needed. 73,

Hi, please need help. The logic I think I understand would be using this software in this order: P25Reflector <-> P25Gateway <-> MMDVM_Bridge <-> Analog_Bridge_1 <-> Analog_Bridge_2 <-> MMDVM_Bridge

Update, I got this working :) Turns out I had the wrong port numbers in the Analog_bridge ini file for txPort and rxPort under the [AMBE_AUDIO] section, I corrected that and now have bi-directional

Thank you for the answers both David and John. The repeater is DR1X, not XE FR and the firmware is the latest according to Yaesu U.K. I have no reason to believe otherwise. I tent to believe that it

Just as a general FYI: For DMR in order of quality, best to worst: DV3000 md380-emu OP25 OP25 does P25 well OP25 does DMR "OK" OP25 does D-Star "Just slightly better

Thanks Jeff! Ill take a look at these and advise...

ok weird, I guess i'm running OP25 and didn't know it. :O Here are my configs. You'll have to change calls, IP's and anything else specific to your installation. Hopefully this will get you started.

Except the DV3000 does not do P25 Sent via smoke signal (AT&T)

I can send you my config Stephen. I'm not running OP25 because IMHO I believe the DV3000 produces better audio. Give me a few to get logged in and grab them.

Thanks Steve, but still no go on this... and I noticed under the [AMBE_AUDIO] section that ambeMode = DMR, should this be set to P25 instead, or does it matter? I did set it to P25. Do I need to be

If you have a working firmware for your non-Fusion application on a DR-1X, I would not change it. With the release of the DR-2X, Yaesu is actively defeating any digital modem/protocol (D-STAR, DMR,