Sounds like your Audio is TOOOO HOT... My settings are below and work great... ************************************** USRP] aslAudio = AUDIO_USE_GAIN agcGain = -5 dmrAudio = AUDIO_USE_GAIN dmrGain =

That is a valid point. I should have provided more information. I have ALS running on a PC along with DMR_ Bridge, MMDVM_Bridge, and MD380emu. My settings are USRP] aslAudio = AUDIO_USE_GAIN agcGain

It would be nice to know what hardware / software you are running. RPi? VM? Emulator? DV3000? Check this in Analog_Bridge.ini USRP] aslAudio = AUDIO_USE_GAIN agcGain =

Haha I realized I worked Ham Nation royalty after the fact. The audio from the DMR user is garbled.

Oddly enough we (K0JSC & K1DDN) just worked you on 40 meters! Not that it's related to the issue at hand. When you listen to hoseline which audio is garbled? Audio incoming or outgoing audio? de

Check / follow your port numbers for error. Most likely the issue. A mismatch somewhere. Take your time and think it through. stage by stage. ...mike/kb8jnm

I have my Allstar node setup with everything and can hear myself great on hoseline. My problem is that when someone tries to connect to me on DMR I get a kerchunk and no audio. When I monitor hoseline

It would be nice, that some colleague of the group that manages the Dashboard well. Add functions such as: - Call in real time. - Dynamic activated or deactivated Tgs. - Show the TGs Bridgeados in

Steve, I used the qth field in /etc/asterisk/echolink.cfg See N4IRS-L <http://www.echolink.org/logins.jsp> 73, Steve N4IRS

I have searched in all the .conf and .ini files but am coming up empty, so could use some help Where in DVswitch can I edit the details for what shows up on Echolink? I am currently running DVswitch

Thank you to Vance, K6SS for finding a problem with the HB_Bridge.cfg file and providing the correct configuration information. The K6SS wget install file is working just fine now. Normally don't

Some troubleshooting update to this problem. All attempts to get a K6SS wget new installation going has been with new version Digital Ocean 9.5 x 64 1GB droplets. We wiped a older 9.3 X 64 and did

I have two Digital Ocean droplets currently running the K6SS wget install package for DMR HotSpots to connect to our cBridge. I created these earlier this year and they are running well. This past

Would a VPN to the repeater work ? -- Bob KC2CWTkc2cwt@...(914)497-5502

I don’t want to keep one any longer than I have to – I’ll place it in the queue and let you know when I’m ready. Cort Buffington 785-865-7206

If you would like , i can see if i can get one out to you KC2CWT Bob Schneider kc2cwt@... (914)497-5502

Excellent. I have the Hytera CPS, but not a repeater. I have been considering buying one to research, but I am not really a programmer, so I am interested in helping out someone smarter than

Time for the start of a FAQ: 1: When will the software be finished? Software means never having to say you're finished. (apologies to Erich Segal) 2: Will you support

When I reverse engineered IPSC, it was absolutely critical to have a real Motorola repeater here in front of me, physically on my LAN to analyze. As I’ve said for years, when I actually have a

Yeah, I love that – it’s never finished :) But it will be good enough to merge in at some point. -- Cort Buffington H: +1-785-813-1501 M: +1-785-865-7206