Well if it ain't broke, you never learn anything. I have but one more issue that kept me up the night. Running on BM TG's, I found if I connect to a quite group (no activity) everything is just

Jeff, I thank you for your comments. Very well taken. I came into this project with 0 AllStar knowledge, I got my Node number over on Memorial Day Weekend, so your input is very valuable to me. The

Mike, I am interested in your USRP configuration. The Ettus chassis, the RF Daugherboard, etc you can email me off list. KC9KKO@... ..jpw

good grief... That seems to have fixed it.... but I did try it that way. Perhaps when my ports were incorrect. Seems to be working nicely. TNX

Change and retest [GENERAL] useEmulator = false                     ; Use the MD380 AMBE emulator for AMBE72 (DMR/YSFN/NXDN)

sorry steve ; Analog_Bridge configuration file. ; This file should be placed in either /etc or it can be ; supplied as a path on the Analog_Bridge command line. ; General Section describes

I shoulkd have asked for the whole Analog_Bridge.ini

opps... thought i caught them all Intel atom 2.1ghz 4gb ram [USRP] server = 127.0.0.1 ; IP address of Allstar/Asterisk toASLPort = 32001 ; Analog_Bridge <--

What hardware are you running on? Please show us your [USRP] stanza Steve

Well after thinking I had this under wraps, and connecting to a busy TG, I found it was tx-ing the channel.(got some hate mail) Scope back trough the docs and files, found a port mismatch. But, after

thank you Steve.

I have built a DMR to Allstar gateway on a Raspberry Pi 3b+ using information from your group, and KV4S. I can key up my talkgroup on my dmr radio and hear it on the phone portal. I cannot get the

Alec, The ASL <-> DMR how to will show you how to add a second nodehttps://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit?usp=sharing Steve

do you have a template that has two nodes on it? i actually want to move my ASL link to my other server with a node. I looked for a template online for two nodes. I know very little about ASL to

The advantage is nobody from the outside can connect if that is what is required. When you want that, then connect it to a public node. You have more choices. Going to be more node security issues as

Jeff, I don't think you are overthinking it at all. I don't make too many outgoing EL connections so it has not been a issue for me. We can look at possibilities to streamline operation.

Steve, Jose, Et Al, I’ve been mulling this in my head for the last half hour because I like the idea of the concept, but there is one disadvantage I see to connecting echolink to a separate

Oh yes it does help. Many thanks.. I could then make 1999 the echolink connection, 1998 the DMR connection, and my node 48270 which is the AllStarlink node may have these added features on to it via

Chris, The ASL log is in /var/log/asterisk/messages To enable more verbose logging at he the CLI> prompt: rpt debug level 0 - 7 7 being the most verbose.

The nice thing with the dr 1x is it is easy to keep analog with the digital modes. But yes it is a dumb repeater