netstat show this: root@vps523689:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State

Ben, From what you show below, DMRGateway is unable to login. The port numbers look good. Are you sure of the IP address of the machine running HBlink? netstat -unap should show you

Yep, sorry. forgot to attach: I: 2018-06-03 15:23:10.101 This software is for use on amateur radio networks only, I: 2018-06-03 15:23:10.102 it is to be used for educational purposes only. Its use

Note: D-Star <---> ircDDBGateway <---> MMDVM_Bridge <---> Analog_Bridge_DSTAR <---> Analog_Bridge_DMR <---> MMDVM_Bridge <---> DMR The above MMDVM_Bridge can be a single instance. In

Anything in the DMRGateway log?

Steve, thanks. Attached herein hblink.cfg, and the Pi-Star's DMRGateway config section that connects to hblink is: [DMR Network

DummyRepeater has been replaced with MMDVM_Bridge D-Star <---> ircddbgateway <---> MMDVM_Bridge <---. Analog_Bridge <---> Analog_Bridge <---> MMDVM_Bridge <---> DMR Steve

Is there a more simpler way to set up a transcode between a DStar REF and and DMR REF than by using the below method? ircddbgw--> Dummyrepeater--> Analog Bridge --> ASL <-- Analog_Bridge <-- DMR

Ben, Can you post your MASTER-1 stanza and the section of DMRGateway that is suppoed to be connecting to hblink? Anything in the logs of dmrgateay or MMDVM? Steve

Setup HBLink on a vps, run it and it seems it runs ok. also, configured two of the hotspots (Pi-Star) enabling DMRGateway, disabling BM and DMR+, enabling HBLink and configuring HBLink with the IP,

Steve, thanks for the reply. It is not that I do not want to connect to the "big" networks, but in my opinion (and I might be wrong, of course) it is best first they learn and adapt in a smaller

Ben, Welcome to the group. We understand not wanting to be part of the politics. I do not see any problem with waht you are trying to do and it certainly can be done with the programs of

Hi there all and first of all thank you for the great tools; not only useful - but also interesting to learn. Let me first give you some background information and next what I am trying to

Now working on Jessie. Thanks Steve. Mike

Think I may have it. LOL. Just figured out how to read the log. Yeah.... I'm THAT slow. It is complaining because I set the repeater ID to the same thing as the User ID. THAAAAT would do it! Chris

What does the Analog_Bridge log file show?

Yeah, if you look about half way up, I did a manual stop and start. When I do a start, I get no feedback. Chris

Have you tried manually starting analog_bridge? I find that I get more info from this than the systemd status. — Regards, Chris Andrist, KC7WSU DMR-UTAH

Hey guys, I working on another DMR ASL Bridge. Everything was peachy until It wouldn't cross traffic. I see that I have a failure on the Analog_Bridge startup Here is what I have: ●

Also, apt-get install p25reflector