What does the Analog_Bridge log file show?

Yeah, if you look about half way up, I did a manual stop and start. When I do a start, I get no feedback. Chris

Have you tried manually starting analog_bridge? I find that I get more info from this than the systemd status. — Regards, Chris Andrist, KC7WSU DMR-UTAH

Hey guys, I working on another DMR ASL Bridge. Everything was peachy until It wouldn't cross traffic. I see that I have a failure on the Analog_Bridge startup Here is what I have: ●

Also, apt-get install p25reflector

Good afternoon all, Steve, I'm doing a fresh install and I did the apt install dvswitch. I got Analog_Bridge , md380-emu and MMDVM_Bridge. I don't have P25Gateway , P25 Parrot or P25 Reflector. Is

Thanks a lot! Chris

Don't block 62031 UDP out and you should be good. The datafile scripts also download via port 80. You do not need to open any inbound ports. Steve

My current installation is ASL and DMR. I have all of the ports configured for ASL, but not sure which ones to keep open for Brandmeister. I know they have a bunch of diff ports for diff repeaters

Chris, I do not have a list but what ports to open would depend on what you are doing. ASL, DMR... ?

Anyone have a down and dirty list for ports to add to your firewall rules? I am tightening up my server since its open to the world and was wondering if someone has made a list, instead of having to

Will, Since the data flows from ASL to MB through AB, it's good to tail both the AB and MB logs. You should see waht is happening in "real time" Steve

I have rebuilt under Jessie. apt-get update apt-get upgrade

This is the list I have. If you know of any others please post. Some of them will need to be parsed

I have to recompile all of the programs under Jessie. I've fixed Analog_Bridge. I need to do the rest. I'll post when they are done. Steve

Steve, FYI... Jessie does not natively support this version of GLIBCXX with latest distro upgrade. I'm still working on the fix though you probably will figure it out a day before

Thanks. This seems to allow the binary and ini files to install. But, when running mmdvm-bridge I get the following error: sysop@debian8:/opt/MMDVM_Bridge$ sudo ./MMDVM_Bridge

My bridge is working very well, however I do have one main problem. Sometimes when one person stops talking and another person takes their turn, my hotspot transmits but there's no audio coming out.

The scripts installed by dvswitch-base do not download from DMR-MARC. There are at least 3 sources of subscriber data and 2 sources of repeater data. We will look at the possibility of a

Yep... Understood.... I modified dmrlink.py and will edit/correct the changes! Jon K1IMD