No. just restarting mmdvm_bridge I removed the file with rm and verified that it isn't there.

Are you rebooting?

Yes it is.

Is /var/lib/mmdvm/DMRIds.dat recreating?

I ran this again too. Still showing that fault at the bottom. root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 16:34:25.761

Well look at that! Getting this now. ● mmdvm_bridge.service - MMDVM_Bridge Service Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset:

Yes, that is the output I will need to see to troubleshoot. Make sure /var/lib/mmdvm/DMRIds.dat does not exist and retest. Steve

Do you mean this output? root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 16:05:20.247 MMDVM_Bridge: I: 2021-08-19 16:05:20.248

I need to see the log from MMDVM_Bridge at the last startup.

OK. looks like the same error. ● mmdvm_bridge.service - MMDVM_Bridge Service Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset:

Yes, you have it right. Try deleting /var/lib/MMDVM/DMRId. I don't have the file name off the top of my head. I'm on my phone. Then try starting mb without a reboot Sent via smoke signal (AT&T)

Thank you! OK. so I ran DVSM_Update.sh, rebooted, and restarted. I'm still seeing the same error in status (systemctl status mmdvm_bridge) am I using the right process/tool for

Try running DVSM_Update.sh and then retry starting MMDVM_Bridge Sent via smoke signal (AT&T)

I managed to get a Vultr server running to bridge Allstar to our DMR talk group. I had node 54897 (on Vultr) registering on AllStarLink and also showing connected on my Brandmeister dashboard

Thanks Mike, we will check it out and see how it works for us. 73

How to Modify A CM108 Sound Fob For Allstar. - allstar setup.com

Hello, I’m new here and hope I have right group! Have any of you connected this setup to a repeater controller without a hotspot or virtual server? A friend has set up a Raspberry Pi3 with the

Hello, I’m new here and hope i h t right group! Have any of you connected this setup to a repeater controller without a hotspot or virtual server? A friend has set up a Raspberry Pi3 with the

Robert, I would personally like to thank you for your timely report of a issue with the P25 North America reflector. Without your quick action I would not have known about the issue and been able to

Hi there, I’m trying to get my copy of dvswitcH_server installed so that i can install analog_reflector. I’m trying to make it through menu 01, and am having difficulty reading some of the