main@DVSwitch.groups.io

Re: Oddly

I saw that. try changing: gatewayDmrId = 3151469 And let's see what the src says. On 07/24/2018 10:36 PM, Ken KE2N via Groups.Io wrote:

By Steve N4IRS · #2005 ·

Test

Test. Please ignore.

By Ed W8VT · #2004 ·

Oddly

the non-functional transmit data in the log shows a "src=" number that I do not recognize DMR, Begin TX: src=13157013 rpt=315146902 dst=315148 slot=2 cc=6 metadata=315146901 In your how-to example,

By Ken KE2N · #2003 ·

Re: : [DVSwitch] stanzas

I don't see anything that jumps out. One thing to try is: gatewayDmrId = 3151469 On 07/24/2018 10:11 PM, Ken KE2N via Groups.Io wrote:

By Steve N4IRS · #2002 ·

Re: : [DVSwitch] stanzas

No problem Here is one (mmdvm) [DMR] Enable=1 ColorCode=6 EmbeddedLCOnly=1 DumpTAData=0 And perhaps you meant this one (dvswitch) [DMR] Address = 127.0.0.1 ; Address

By Ken KE2N · #2001 ·

Re: : [DVSwitch] stanzas

Sorry, I should have also asked for the [DMR] stanza. On 07/24/2018 08:36 PM, Ken KE2N via Groups.Io wrote:

By Steve N4IRS · #2000 ·

: [DVSwitch] stanzas

Yessir (some white space squeezed out here): [AMBE_AUDIO] address = 127.0.0.1 ; IP address of xx_Bridge txPort = 31103 ; Transmit TLV frames to partner on this port rxPort =

By Ken KE2N · #1999 ·

Re: sorry

Please show your complete [AMBE_AUDIO] stanza in Analog_Bridge.ini Also show the [General] and [DMR Network] stanzas in MMDVM_Bridge.ini Steve On 07/24/2018 07:28 PM, Ken

By Steve N4IRS · #1998 ·

Re: AMBED

to clarify - these results are after having done the update/upgrade as you recommended.

By Ken KE2N · #1997 ·

sorry

Following this thread back, I think you were telling me that I need two fob's to do DMR to DSTAR. I understand the AB's would be cascaded to do that. Right now I am just doing DMR to analog, but I

By Ken KE2N · #1996 ·

Re: AMBED

As I said you can ignore those lines. Did you do a apt-get update and a apt-get upgrade? What was the result? Sent via smoke signal (AT&T) On Tue, Jul 24, 2018 at 6:10 PM -0400, "Ken KE2N via

By Steve N4IRS · #1995 ·

Re: AMBED

Sorry - yes, now that I wrote a "1" in there, it is staying at that value, even with a restart. But the ioctl error is still there M: 2018-07-24 22:00:20.681 Setting [DV3000] address ->

By Ken KE2N · #1994 ·

Re: AMBED

AB does not change thelatency, use the echo I included. Do you still see? W: 2018-07-24 18:24:22.584 ioctl reset error W: 2018-07-24 18:24:22.584 ioctl speed error W: 2018-07-24

By Steve N4IRS · #1993 ·

Re: AMBED

Analog Bridge Version 1.1 Wed May 30 15:46:26 EDT 2018 latency is still at 16

By Ken KE2N · #1992 ·

Re: AMBED

Each copy of Analog_Bridge can only use one Vocoder. So, for USB1 you will have a second copy of Analog_Bridge. These lines are meaningless and should be gone. W: 2018-07-24 18:24:22.584

By Steve N4IRS · #1991 ·

Re: AMBED

I am building DV switch on the same box where I was experimenting with XLX - so the device was already there. Initially I got some audio to pass from DMR to analog and it sounded kind of "muddy" so I

By Ken KE2N · #1990 ·

Re: AMBED

My fork of AMBEServer will *possibly* get a 3003 working with Analog_bridge, but only a single channel, which is a bit of a waste - https://github.com/marrold/AMBEServer If it doesn't work, I'd be

By Matthew 2E0SIP · #1989 ·

Re: AMBED

Ken, This begs the questions: How many bridges that you are planning will need a Vocoder (Remember you will need 2 for transcoding) How many bridges that you are planning will involve

By Steve N4IRS · #1988 ·

Re: AMBED

No AMBEserver does not support the 3006 -- ambed is the current solution and is only used by the xlx reflector system. -- John D. Hays Edmonds, WA K7VE

By John Hays - K7VE / WRJT-215 · #1987 ·

Re: AMBED

OK - thanks for that. But apparently I do not need AMBEserver if the device is a ThumbDV. Can AMBEserver talk to the 6-channel device? if so, what does the config file look like?

By Ken KE2N · #1986 ·

Messages