Thanks for the info, I was successful in getting that piece added to the puzzle! Now, I just need to find a way to have Pi-Star stop updating my P25HostsLocal file every day!😊 Jim, K6JWN

And, just to be clear, you are running Analog_Bridge from the deb (apt-get update, apt-get upgrade) not from the github repo On 06/23/2018 10:31 AM, Mike Swiatkowski via Groups.Io

I'll build a Analog_Bridge on Jessie64 (again?) I thought I did already. In the mean time, if you had one way audio Analog_bridge had to be working. On 06/23/2018 10:31 AM, Mike

Well, I think you need to double check the port assigned paths RX > TX & TX > RX Most likely the issue.

Steve, I think Analog_Bridge.x64 is broken on Jessie. mike@allstar:/opt/Analog_Bridge$ sudo ./Analog_Bridge.x64 Analog_Bridge.ini ./Analog_Bridge.x64: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version

Jim, Yes, you will need a second instance of Analog_Bridge configured for P25 and pointed at a new node stanza. You will NOT need a second instance of MMDVM_Bridge. Enable P25 and P25Network

So, I have my Allstar to DMR bridge working using Analog_Bridge and MMDVM_Bridge.. I would like to add P25 into this mix, is it something that I can easily add, or would it require running a 2nd copy

Adrian, Yes, HBLink or DMRLink can do this. it depends on what your client is. MMDVM or Motorola repeater. We have a subgroup dedicated to HBLink. You are welcome to join there also

Hi Everybody I would like to setup a Stand Alone DMR Master server and don't know where to start. I have VERY basic skill with linux and will need someone to hold my hand though this process if it is

You would not want to have a single reflector pointed to by two different TGs. Since you can not share a reflector with other TGs. You would run a second instance of P25Reflector on a different

it doesnt matter what TG you pick because the gateway is looking at the ip address. So you can host many p25 TG on the same machine with diff TG numbers of your choice. if I just am making one

Has anyone built a P25 reflector using VS 2017 for windows? I would like to build a local private reflector for us to test on. Any help would be greatly appreciated!

Run everything in the foreground. You should see the traffic at each program. Check the port numbers TX to RX. On 06/21/2018 07:58 PM, Mike Swiatkowski via Groups.Io wrote:

Yep. I have 2 thumbDVs on the same box as the 2 instances of Analog_Bridge. My problem is I have one way audio. Only DStar--> DMR audio is working. Just trying to troubelshoot.

MMDVM_Bridge does not use a Vocoder, Analog_Bridge does. For DMR <-> D-Star you will need to transcode. So, you will need 2 instances of Analog_Bridge. Analog_Bridge can use AMBEserver to

You don't *need* AMBEServer alongside Analog_Bridge, it's only required if your transcoding chips are connected to a different device than the one Analog_Bridge is running on. You will however need at

Steve, Is ambeserver required for MMDVM Bridge? Mike

Nice and very true Thanks for sharing Aloha Wayne

Yes, I totally agree with that. I am looking forward to messing with P25 with my new Zumspot and portable. Hope to chat with you guys soon! Jim

We did change the Master to 3108 and have no dropouts in the last 36 hrs. Thanks for the advice and for a great Bridge Steve. 73' Alberto KP4AP