thank you. ill give that a try. its new to me but will try already done the static ip address, that was easy

You need to assign the device that is the server a static IP address on your LAN. example: 192.168.1.20 Open the port you have assigned your DVSwitch server to use. You do that in your router. It

hello, im new to using the dvswitch server. i have it running well on my home network, but would like to set it up for mobile use on a network radio using my phone as the internet hotspot. I'm not too

Leave your server at home. Open port in router. You will need to know current ip address of router. Connect to it via your phone and Dvsm. Get Outlook for Android

Hi, I have a dvswitch server setup on a raspberry pi 3. I've set the the static ip address. It's working fine on my home WiFi. So the question is How do I make a connection to the pi3 dvswitch server

I figured out the problem, by filling LocalAddress with 0, this prevents MMDVM Bridge from complaining. Before: [System Fusion

I have a setup with ASL --> MMDVM_Bridge--> YSF Gateway. I am using ports 4201 / 3201 to communicate between MMDVM_Bridge and YSF Gateway. I am getting a substantial amount of error messages as

I can try to help. What are you trying to do? what have you done so far? What is working? I had to run a separate instance of MMDVM bridge. I started with a working ASL <> DMR setup. I then Added

BTW, the demo server is on 64 bit. On 4/27/22 21:09, Ken Arck AH6LE wrote:

Send it direct. On 4/27/22 21:09, Ken Arck AH6LE wrote:

Best I can do is send me the IP. username and port. I'll try it from here. On 4/27/22 21:09, Ken Arck AH6LE wrote:

I thought looking at the ASL CLI might be useful but it shows nothing.from my phone. The host is exposed to the internet and has no issues from authorizednodes connecting ( I run a private node). I

Actually, it tells us iax2 can not register with the server and then it can not connect. So, first, do the UDP ports match? Is the host exposed to the internet or behind NAT?

I can connect to (and use)the demo no problem. Phone says Registration: Not Registered Node: Not Connected Not very helpful. log doesn't show anything related to anything phone (or iax) related

Error messages on DVSwitch Mobile? Anything in the asterisk logs? Can you connect to the demo account? On 4/27/22 20:14, Ken Arck AH6LE wrote:

Not sure if this is the right place for this but I took a working set ofPi ASL .conf files and used to build a AMD64 ASL running on a x86_64platform under Debian Buster (used the ASL 64 bit package

I did not. I see in another post that maybe I need to run separate instances of MMDVM bridge? I need to reinstall the ysf reflector. So little time Sent from Mail for Windows

Something about /opt/MMDVM_Bridge2/MMDVM_Bridge.ini does it exist ? check ownership/permissions check file for type error On 4/25/2022 2:41 AM, KC5MOL Javier

Did you get your setup working?

On Sun, Apr 24, 2022 at 06:40 PM, Tony Langdon wrote: What does your MMDVM_Bridge log for instance 2 say? On 25/4/22 9:25 am, KC5MOL Javier wrote:i though it was working but I get these Failures.