Honestly i have no clue. I'm just replicating the IP and ports pi-star uses to connect to BM 3108.. I can connect fine to BM 3108 on pi-star with, IP 64.94.238.196 PORT 62031 ID 316202502

Is the port number valid for the master you are connecting to? Is the password valid for the master you are connecting to? 316202502 is 9 digits, Depending on the master, I don't think it's

This dont seem to want to connect at all, [REPEATER-1] MODE: CLIENT ENABLED: True EXPORT_AMBE: False IP: PORT: 54001 MASTER_IP: 64.94.238.196 MASTER_PORT: 54000 PASSPHRASE: homebrew CALLSIGN:

Dough. I changed password to passw0rd. Cheers, Jay

DVSwitch Coders, Thanks again for you contributions. Your group has accomplished some pretty cool things since the initial commit to Github June 27th, 2013. I would like to connect to DMRPlus. I have

[REPEATER-1] MODE: CLIENT ENABLED: True EXPORT_AMBE: False IP: PORT: 54001 MASTER_IP: 172.16.1.1 MASTER_PORT: 54000 PASSPHRASE: homebrew CALLSIGN: W1ABC

What would I put if I'm using a motorola repeater? Cheers, Jay

Did you add in the package Id and the software I’d? It should connect right up of you did. Corey. N3FE

Same as this issue, NC110 HBlink-HB_Bridge # ./hblink.py DEBUG 2017-06-20 23:07:26,775 Logging system started, anything from here on gets logged INFO 2017-06-20 23:07:26,775 HBlink 'HBlink.py' (c)

So I edited the hblink.cfg and added BM in the repeater section, it logs into BM successfully but then i get an MSTNAK from BM and the connection drops... Whats this about? lol

Do you happen to have a sample config for HB_Bridge to connect to BM 3108? Just not seeing it yet...

Good question! I'll test and report back. The whole point of wanting to do this is so I can have YSF2DMR connected locally rather than having to go out and back to BM which causes quite a bit of

Waht happens if you remove ysf2dmr?

Hi Steve, Thanks for taking to time to have a look, see attached. Peter

take it in small pieces.

Ok, Seems like a big feat but well giver er a try lol Thanks!! 73,

yes

so, BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink <---> MASTER Repeater

BM <---> HB_Bridge <---> IPSC_Bridge <---> dmrlink

So what, it would be Repeater > dmrlink > HB_Bridge >IPSC_Bridge > dmrlink > BM ?