All, I've got a DMRLink bridge that I wanted to add an MMDVM too, so setup HBLink and confirm it worked with the MMDVM OK, then configured IPSC_Bridge, and HB_Bridge, all worked OK and using bridge

Steve, Tnanks for the update & all the hard work by everyone involved! As you know already, over the past several months one of my big projects has been the Carolina Link and without a lot of the

Its working fine! Thanks for the informations :-)

Stave, Any more information on this MD380emu

Thanks for  the update Steve,  Not enough words to express my apprecation to  the work you guys are doing .... Richard VE2DJE

It has been quite a while since we posted a status update on all of the projects either in the works or deployed. The toolkit is growing and maturing. We are adding connections to more Networks and

You will not need a DIU at all. The analog to P25 conversion will be done with a piece of software called P25_Bridge on the right side of the diagram. The Cisco is a 1841 router just like P25NX

Steve It sounds about right. I’m basically trying to maintain a P25 network of repeaters that are linked to a few FM repeaters and simplex nodes. Mostly just to say that I can do it (I like

Bill, If I understand, you would like to connect a P25 Quantar in P25 mode to a AllStarLink network. That is quite possible though it takes a few things. We can connect a AllStarLink network to the

Good morning, everyone! I was pointed over here from the AllStar Link mailing list. I own and operate several mixed-mode P25/FM ham machines (100w Quantars) in Las Vegas. Currently, the FM machine is

Thanks Steve K4SQ, That fixed it, changed to 1.5 and DStar audio levels now much closer to others on Allstar. 73 Peter G7RPG

Peter/Steve, I ran into this problem a while back. Peter, you have to modify the DummyRepeaterThread.cpp file. The division by 3 drops the audio level pretty low. So, I modified it to multiple

Steve, Do you know if it is possible to manipulate the audio levels like you can with analog_bridge, DSTAR>ASL is quite low. 73 Peter

Okay, I will try it today in give u a feedback its working or not :-)

You’re running two copies of hblink.py: hb_confbridge.py will call hblink.py underneath it (as a module) hb_parrot.py will call hblink.py underneath it (as a module) These are the two programs you

Polly want a echo?

Yep, I absolutely hat the name. Doesn’t matter. Everyone is going to call it parrot. I’ve had to accept I cannot stop that. -- Cort Buffington H: +1-785-813-1501 M: +1-785-865-7206

Cort, I remember you telling me off for calling the echo function the parrot :) ________________________________________ Sent: 18 March 2018 18:30:38 To: main@DVSwitch.groups.io Subject: Re:

Maybe you could send your configuration files and I could check them.

Today I try it, but its killed :-( root@Pi:~/HBlink# ./hb_confbridge.py DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged INFO 2018-03-18 18:58:50,897 ID ALIAS