Any my next question will be how can I do the above with BM instead of the cbridge? ;) Thanks!!!

Peter, Can you give us a simple diagram of what you are doing?

Awesome. thanks for the reply. So here is my next question, So in order to run software diagnostics and other software the repeater needs to be in MASTER mode not Peer. Is there a way to have it in

Just a shot a little video that I hope shows the effect https://www.youtube.com/watch?v=sIVn3OyDP_w 73 Peter G7RPG

confbridge.py in DMRlink was intended to do exactly this, and to be a stand-alone “call router”. It’s been in production service as part of the K0USY Group “regional” network since it was

I did this type of thing with confbridge quite a while ago. You may also be able to use proxy. Maybe someone else can chime in. 73, Steve N4IRS

Hello, I'm looking to connect my Trbo repeater to a "IPSC Gateway?" and that gateway connect to a c-bridge. Doing this for a "man in the middle" way of managing the talk groups etc. Is this doable and

Hi All, I've been linking my asl node to BM direct using Analog_Bridge and HBlink-HB_Bridge, this has been working perfectly. I'm trying to use a another instance of HBlink to create a local proxy

Thank you, looks like it running now excerpt from logg. I: 2018-04-22 20:00:47.485 Opening P25 network connection I: 2018-04-22 20:00:47.917 Loaded 89798 Ids to the callsign lookup table I:

change: Daemon=1 to: Daemon=0 In P25Gateway.ini

P25 reflector shows started . a ps ax | grep of P25Reflector shows nothing. If I look into the /var/log/P25Reflector I found this.. Any thoughts ? root@442-400Repeater:/var/log/mmdvm# cat

Just now tried 3108 again and same response. Switched to 3102, connected and working. Ed W8VT

Corey is right , I did not catch the NAK. The DMR-MARC issue still happens also.

It appears that 3108 Was having some issues with MMDVM connections (Home Brew Protocol) this morning. Had the same issue last night and Mark removed the beta and went with last full production

Ed, Check the subscriber ID file. DMR-MARC has changed it yet again. HB does not like it when the file is damaged Here is a script I use to get the file now. wget -O

Has been working great other than need to reconnect to Brandmeister every now and then. Went to do that this morning and get this, that seems to repeat forever: load config file config.file INFO

dmrGain is used only when dmrAudio is set to AUDIO_USE_GAIN. It is a simple multiply for each PCM sample, so 0.0-1.0 is the proper range

Trying to adjust the audio levels and I want to know if analog_bridge.ini the dmrGain can go negative? Audio from dmr to allstar sound great. Audio from allstart to dmr is a little high have to

-b HB_Bridge sent via smoke signal (AT&T)

I did….git clone https://github.com/n0mjs710/HBlink Is there a switch I need to add?