Done !!! Everything in working ! Thanks Steve for your help and for your work ! I launch in test just a few minutes ago the "French Open Networks" with all gateway : Analog/DMR/C4FM/DStar It's done

Hi Steve Sorry, I found ! In my rpt.conf, my IP address for USRP pointed to local and I had to change it to the IP where the Analog_Bridge is running. Now I have sound from ASL to DMR and from

k7udr posted: "Today is the last day to order an XC-3006 6 Channel AMBE Vocoder. We've received 22 of the 25 orders required for an assembly run. We need 3 more to make the run.If you are one of the

Hi Steve, Thanks, I did the correction, but always nothing from ASL (Echolink) to DMR. In fact, when I speak from DMR to ASL, in the Analog_bride logs, I see the

Today I added Access Control Lists (ACLs) to hb_bridge_all.py This was in response to those with no desire to re-write TGID or TS, but who wanted some ability to limit how/what traffic is forwarded.

Michel, In Analog_Bridge.ini you have this in the AMBE_Audio section: gatewayDmrId = 2088012        ; ID to use when transmitting from Analog_Bridge repeaterID = 2088012        ; ID of

Hi Steve and all I write from France, so please, sorry for my English ;-) So, I try to make working ASL <-> Analog_Bridge <-> HB_Bridge  to link Echolink with DMR. I installed ASL in a VM and

Mike, A little history for you. Mike, N4IRR and I discovered the work Cort did on DMRLink a few years ago. We quickly realized that it could be leveraged to connect a c-Bridge to

Hey Mike, Just to follow up on using ThumbDV's with the XLXD software. Like I told you in chat, I've setup a few of these now. They work great & have been rock solid using the 1.1 version of the

Hey Mike, Hope things are going well. What happened w/ the audio levels from when we initially setup your bridge? I've setup various different bridges & the only time I've had to modify the

DMR to D-Star, yes you need Analog_Bridge D-Star to ASL Analog_Bridge is NOT used. I think I know pretty well how Analog_Bridge, HB_Bridge, IPSC_Bridge are used. 73, Steve

Steve,It's used quite a bit more than you think. You don't have to look that hard on google or Yahoo to find examples. There is no easy way to go from DMR to D-Star so Analog_bridge is used. I

https://github.com/boatbod/op25/tree/master/op25/gr-op25_repeater/lib

Analog_Bridge is not used in that configuration. we can look at adding audio level controls to DummyRepeater

Yes.

Mike, Just to be clear, we are talking about DummyPrepeater to AllStarLink? DummyRepeater <---> Allstarlink Steve

Steve, I noticed the source of my problem was setting AUDIO_UNITY on the ASL side in Analog_Bridge.ini. Unity sounds better but the amplitude is probably 40% of what it needs to be. Is there any way

I am trying to increase the audio amplitude from Allstar to dummyrepeater using Analog_Bridge. Besides Analog_Bridge.ini settings where can I do this? Thanks, Mike, AA9VI

That is an option, but most parts are SMD and construction time is significant. I think you can buy as few as 10 pieces of the 3003 and pay before shipment. This whole project is to help the

Here is a homebrew project that costs substantially less and has 3 channels: https://github.com/phl0/AMBE3003USB The killer is the AMBE3003 chip, you have to order them in quantities of 90 from DVSI I