Folks, DMR-MARC is changing their database API to only support json format. To this point, dmr_utils has used csv. The next update I push to dmr_utils will be a fix for this. I’m testing it now,

No, the parrot is not installed by default, you will have to configure it. See the config for your options on how to run it. Steve

Problem was VPS issue...a put new image of debian jessy and all is running now... Time to play with HBlink STeve, is the parrot is running per default? in the csv it look like to be set on TG 9998,

Hi Steve, sorry for the delay, I juste cheked on my VPS and for an unknow reason...the VPS can't reach pyton.org. VPS is in a big data center... will check and let you know. I will try locally on a

Cool, Sorry for the initial misinformation. I should have gone back and revised that. I know that making DummyRepeater run headless etc is a pain. We will be replacing it with a MUCH simpler

BINGO! That fixed it, thanks Steve. Its running under ESX and added an 'HD audio' device. 73 Peter

OK - I'll give that a try and report back.

OK, I may have to go back and find that message and edit it. DO you have a real sound device available in those pulldowns? If so select it. If not, can you add a simple sound device like a CM1xx

Hi Steve, Yes, followed your instructions from a previous post. Peter

Peter, I'm pulling this off the top of my head. Do you have the sound device in Dummy Repeater using snd-dummy? 73, Steve

Hi All, I've got my Allstar node connected to DStar (DCS005E) using the dvswitch modified version of dummy repeater. All seems to be working well apart from a digital burst of noise that is heard

Guillaume, I just ran the install.sh script on Raspbian Stretch without error. I suggest you check your DNS (ping http://pypi.python.org) I would also make sure your other packages are up to

Hi steve, i got this error trying to install dmr_utils Downloading/unpacking bitarray (from dmr-utils==0.1.8) Cannot fetch index base URL http://pypi.python.org/simple/ Could not find any

Make sure you also installed dmr_utils https://github.com/n0mjs710/dmr_utils Run the install.sh script. 73, Steve N4IRS

Hello group, i am quite active in dmr and a want to explore HBlink but my skill are limited in Python use.. I run python 2.7 in raspbian and also on a debian machine and on each one when i try to load

Hi Steve, Got round to having a play with YSF2DMR and successfully got YSF2DMR to log on to BM and a YSF reflector so the Allstar hub here now has access via YSF using the same vocoder doing

I don't believe that it was doing it before the BM fix merge. pertinent file sha256s included below from each branch. d8b7f9be364eddf9c9f6726bd2f620f4cd2bc6ca84c57a93424e1ee99cd4f5b7

BTW, P25 <---> YSF Wide is on the roadmap

From ASl  you would still need a Vocoder.

I would have to give a unqualified "I think so" ASL <---> Analog_Bridge <---> YSF2DMR <---> YSFGateway <---> YSF Reflector. We did start a YSF_Bridge Partner that as of now only works in one