The DMR IDs for repeaters are 6 digit, we are up to 5 digits. Our node numbers do not fit within the DMR ID system. There are some possibilities that could be explored. The big issue is that

It would be nice to register a DMR ID for the ASL node. i.e. ASL 2060 Then a DMR user could lookup the node number. David KE6UPI -- Thanks, David "Laws that forbid the carrying of arms...disarm only

Could not agree more . I had to do a couple of conferences to get some acceptance about the idea of a Bridge between DMR and Analog Allstar .... Even after that , there is still

Hi Steve, Couldn't agree more, in the UK our Ham licence actually says for educational purposes, and it's something us Amateurs have always done, including bending commercial systems to our needs be

Mike, What error do you get? What is in the log? Do you have the USRP node in the node stanza? Steve

I'm having problems connecting my allstar USRP nodes (i.e node number that interfaces to analog_bridge) to other USRP nodes. I have no problem connecting the USRP to a URIx hardware node. But, I

I was forwarded a post from Doug WA3DSP concerning interconnection to other services/modes on the HAMVOIP list. I have seen in the past that Doug considers himself the guardian of all good audio and

David, I usually my own radio id. My wife is a ham so I have been known to use hers. Steve

Hi What is everyone running for a ID from analog when you do a allstar to dmr bridge. 0 was giving me troubles on my radio.

After digging threw GitHub I found hb_bridge. It is all working for me now.

I redownloaded everything and now that part is working. I have Analog_bridge running right I think. Do I run hblink.py or hb_bridge_all.py? I do have some things in hblink.cfg. When I connect to the

David, Just to verify, which Analog_Bridge are you running? For the Pi should be Analog_Bridge.ARM. You can rename it to just Analog_Bridge. Also, please post your Analog_bridge.ini 73, Steve N4IRS

I am just starting this part. The test with the dongle works. I go to start Analog_bridge and it get all they way down to starting serial for the dongle and I get a Segmentation fault error. ps

Of course I have not had the time to get to this, hopefully sometime in the next few weeks I can sit down and look at it unless Mike has already done so?

Ok well if there anything you guys ever need, just let me know. I can help you with connections from 3102, 3103, or 3108.... Corey N3FE Sent from my iPhone

apparently nothing – false alarm from what I hear. -- Cort Buffington H: +1-785-813-1501 M: +1-785-865-7206

I will need to look into this later as I am now t home but my smart Ptt links on 3102 are working fine. I need to know the talkgroup and login I’d number you are using for the smart Ptt connection

He is an admin, Mark owns the master 3108 and I own 3102 but we have a team that manages them. Sent from my iPhone

What do you guys need help with? I am a master admin for 3108. Sent from my iPhone

Sorry guys, I'm flat on my back sick Sent via smoke signal (Verizon)