Anyone here have a clue who to talk to at Brandmeister when your connection looks good but nothing shows up online or comes out the other end? -- Cort Buffington H: +1-785-813-1501 M:

Due to work have not had a chance to play with my project anymore this week. It is currently on a RPi 2 with a 3A supply. Would I be better off moving it over to an old X86 machine (also have RPi 3's

Steve, I ran the test4 again and changed the range to 10k. It completed the tests with zero errors. Corey

OK, Let us know the result of the long term test and the console output from Analog_Bridge.

I am running the serial connection.

Corey, Are you running ambeserver or serial connection to the ThumbDV? Steve

Also, run AMBETest4.py with the -e option. It will stop on error.

I have also seen clipping like behavior when the gain values were not correctly adjusted. Sent from the iRoad

Corey, I'm betting you are still having issues with the ThumbDV on a RPi. I can suggest a few things. Try a powered USB hub. Try running on a X86 machine Run Analog_Bridge in the

I've noticed a couple issues playing with the setup. The first was the thumbDV resetting after about 5 minutes of audio. I raised the input voltage and the reset problem appeared to go away. The

I am up and running thanks to Gescio, WH6AV, remoting into my system and making the necessary changes to enable the bridge. Thanks again Gescio for taking time out of your day to help me and give me

Corey, I’ll provide an example of how I’m doing it for 310815 <-> the fun machine (k0jsc.com) in Colorado when I get home this evening. J Cummings N0PKT Sent from the iRoad

Steve, I'm doing the same thing as Ed, but just don't understand what I am doing and need some hand-holding guidance. So far I have updated rpt.conf file and have a node number using the USRP channel

clone dmr_utils from this: https://github.com/n0mjs710/dmr_utils.git run the install.sh in dmr_utils clone HB_Bridge from this: git clone -b HB_Bridge

At this point have a fresh install of DIAL on a RPi2. Have Analog_Bridge running and communicating with the DV3000 per the DMRGateway install notes. I guess next step is HBLink. Could use some

When active confbride take configuration ip from hblink.cfg and all traffic pass trought confbridge ? For parrot need to start also the service ? Or if start parrot, confbridge and hblink are active

Alright. I'm waiting on an MMDVM to come in to interface to the other repeater. Once I have it I'll let you know of audio is truly passing. Thank you.

If audio is passing I would like you to try editing the IPSC_Bridge.py file, line 148. It needs to be an 8 bit value (like HB) so change it from _seq = int_id(_data[20:22]) to _seq =

Even though the log is showing high loss rate, how is the audio passing? Steve

The system in hb_confbridge_rules must match the stanza name in hblink.cfg in the example: 'WORLDWIDE': [ {'SYSTEM': 'LSMFT-1', 'TS': 1, 'TGID': 1, 'ACTIVE': True,