Folks, I'm in a. project to bridge a repeater system with some talkgroups that I have on the Quadnet array that are YSC, and dmr. I understand that I can do a lot of this kind of work with something

Thanks Steve, changing telemdefault=0 in rpt.conf has fixed it

Hi Komkit, thank you very much for the detailed reply. This was the current version when I setup the reflector. I am glad you pointed out the issues. I will have a look for an earlier version. If I

Scot, YSFReflector version 20210215 many of us are having the same issue with it, where the reflector would crashed when user is unlinked from the reflector. My reflector would be up for long time

<https://dvswitch.groups.io/g/allstarlink/wiki/9671>

Hello, could anyone advise how I can turn off (assume one of the .conf files in /etc/asterisk/) voice notifications telling me when nodes connect or disconnect when USING DVSwitch. Many thanks in

Hi, there existing a few rooms here in Germany on C4FM YSF ( rooms like Ramses2) wich allow the usage of the high quality wv mode from yaesu. Normal Rooms uses the DN mode in most ysf and fcs rooms,

So if I am using a Pi, do I still need the pyUc app installed on mac, or should simply pointing the browser to the pi’s address allow for audio setup etc? Thanks, Justin

Just an aside: I used to use a hardware vocoder for AMBE. I can't tell the difference between hardware and software. Yes, you'll definitely want hardware for D-Star. That's currently

Justin, All of the .ini files can be edited. The dvs menu is intended to make it easier to use. All of the programs and .ini files are in /opt For example, MMDVM_Bridge is in

Folks, I've just downloaded the latest dvswitch image, flashed it to an SD card, and put it on a pi. So far so good. However, I'd rather edit the .ini files Ineed by hand instead of using the menus,

The reflector log when the station logs in

Hi Steve, yes it does take the reflector offline, I just restarted it at 13:21. Which log are you asking to see please? Thanks Scot 2E0WWV

OK, So, it does not take down the reflector. Can you post the actual log file? IF I can find anything in the log, you can talk to the user, or you may have to block his IP. To get

I just reboot it, but its annoying.. The logs say :- M: 2021-06-04 13:16:05.204 Network watchdog has expired M: 2021-06-04 13:17:29.844 Currently linked repeaters/gateways: M: 2021-06-04 13:17:29.845

What is in the log? How do you recover? Assuming you use systemd to start the reflector, is there a restart?

hat is in the log?

Does anyone know what a corrupt callsign keeps knocking my Reflector offline? It fine for days unless they user tries connecting? Thanks Scot

Sorry guys, I made a boo boo. Its not chmod (this changes file permissions) With the error you got, I went looking and found I'm 'toopid' :-) The command you really want is chattr +i {filename (or

Thank you guys. Kevin I had to go with Mike's recommendation because when I issued the chmod command I got chmod: invalid mode: ‘+i’ Mike IK7VXC