Keep the password simple for now.

You can not edit it. You will have to recreate it.

web interface won't let me log in. authentication fails. tried editing callsign.json to no avail.

I noticed the directions mention an amiport in the Allstar node portion, but there is none in my .json file.

What happens when you use the web interface to control the server? Please post the Analog_Reflector.log when you connect from DVSM and try to transmit and tune.

K

Show me your Analog_Reflector.json

I set up the .json file for just the basics, using port 12345 for the mobile app as in the setup example. When I connect, DVS mobile says "K6RBJ joining reflector" but I have no PTT nor TG steering.

K. Had to step out for a bit. Working on it all now. Thanks, Bryan

OK, You do not need the LAN addresses for the 2 local nodes 54464 and 1999 but for now we will leave then as is. On your DVSwitch Server, edit /opt/Analog_Bridge.ini In the [USRP]

K. Thanks!

FYI, Two way audio went away since last night. I can hear audio on my BM TG3176651 when I tx from my analog 2m repeater. No return audio over the repeater when I tx via DMR.

OK, send iax.conf and extensions.conf

Good thing for Filezilla!

Send the file

Should I send the whole rpt.conf file, or try to copy/paste the contents? It is around 1000 lines, so I am not sure of the easiest/fastest way to do it in one shot.

If not 127.0.0.1 something is still wrong. Post your rpt.conf Sent by smoke signal (AT&T)

Have nodes connected and verified audio going both ways. Now what to do to still be able to use dvs mobile app? I can still steer TG's, but no audio.

Ok, making progress. I had to change my public and private node IP's in the rpt.conf node stanza to the actual server lan IP (192.168.0.75) and not 127.0.0.1. Now they connect to one another. Now to

If you plan to continue to use DVSwitch Mobile with DVSwitch Server, yo will need to add another component to DVS. We will cover that after you get your HAMVOIP node configured. I don't know