Alex, is the bridging the 2 DMR the primary purpose of the bridge or is connectivity to AllStar more important? If you need to shutdown the DMR bridge, does AllStar need to stay connected to

Steve, Basically the setup is that my friend and I have started putting together a small network. We have a few nodes in the cloud and a couple of RF connected nodes. We have Echolink configured and

Alex, To build your system the way you defined, yes, you need to define a second node in rpt.conf and use another pair of port numbers for USRP. My question is what is your end goal? Are you trying

To avoid transcoding issues between multiple common AMBE codecs, it's a better idea to use hblink and a single instance of DVSwitch. Hblink connects to the master servers (if Brandmeister,

Hi there, I am trying to bridge ASL to two different DMR networks and understand that I need to run two instances of DV Switch to make this happen. I have MMDVM_Bridge, MMDVM_Bridge2, Analog_Bridge

Also, show me the startup of YSFGateway

Show me the output of: netstat -unap Steve N4IRS

STFU is our implementation of the BrandMeister Open DMR Terminal Protocol. BM is pushing all the software based developrs to use ODMRTP to connect to BM. Simple Terminal Feature Update is our

HI all, I’m Ben - ON5BGO from Belgium is there a how to guide to install and configure an YSF reflector ? And what are the hardware requirements for a good and stable works ? (sorry for this

What is stfu mode? What is intercom mode? Ken n1dot

yes, 7 digit (2080360) but it's not working. KENWOOD NX5300 decode as Broadcast call (not decode every Time) HYTERA and Motorola decode nothing.

Do not use SSID, just 7 digit DMR ID

For your info : On Motorola not OK no audio no talker alias On Hytera not OK no audio no talker alias OK on Kenwood NX5300 OK call received as brodcast call???

Ok no problem. Something is always wrong since no audio on RF side. Good meeting and let me know if you found something. Thanks for your nice work !

I'm in a meeting, I'll check in when I can Sent via smoke signal (AT&T)

With DMR ID, call is routed to RF side but no audio and no ID or talker alias

Put in your dmr id Sent via smoke signal (AT&T)

See my question. The id you transmit with must match the id you login with. Sent via smoke signal (AT&T)

in DVSwitch.in UserID = 208036002

From Hytera repeater to STFU it's ok, I heard audio From HTML Client or PNC380 nothing routed to RF side