Date   

Re: ASL to DMR Bridge...changing talkgroups

Steve N4IRS
 

On 11/21/21 7:31 PM, John Springman - KB3AWQ via groups.io wrote:
The dmrtuneTG.sh one and the one Autopatch one below below.  I dont have a custom folder i asterisk folder though.


Re: ASL to DMR Bridge...changing talkgroups

John Springman - KB3AWQ
 

The dmrtuneTG.sh one and the one Autopatch one below below.  I dont have a custom folder i asterisk folder though.


Re: ASL to DMR Bridge...changing talkgroups

Brad N8PC
 

What script are you running and how is it configured in your rpt file?


On Sun, Nov 21, 2021, 2:43 AM John Springman - KB3AWQ via groups.io <fpcaptain=yahoo.com@groups.io> wrote:
When I run this script it works fine if I am on the bash shell.  When I add it in the rpt.conf to do it by dtmf, it gives me a busy signal like on the phone and i have to restart to clear it so not sure what may have happened on mine.. 


Re: ASL to DMR Bridge...changing talkgroups

John Springman - KB3AWQ
 

When I run this script it works fine if I am on the bash shell.  When I add it in the rpt.conf to do it by dtmf, it gives me a busy signal like on the phone and i have to restart to clear it so not sure what may have happened on mine.. 


Re: Private Calls - DVSwitch Mobile & Server

gareth@...
 

That's what I thought as well. 

If I'm connected to a 'Classic' DMR server that works perfectly. However on the IPSC2 server i'm on it doesn't.

Ok back to drawing board and playing.... Glad it's not that I've missed something in DVSwitch Server Thanks Steve


Re: DVSwitch voice works just fine on C4FM but it's not allowed on Wires-x

bill richardson
 

Thank you Steve. 


On Nov 18, 2021, at 4:44 PM, Steve N4IRS <szingman@...> wrote:


We are working on YSF. No further info at this time.

Sent by smoke signal (AT&T)

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of bill richardson <ng1p.bill@...>
Sent: Thursday, November 18, 2021 4:21:34 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] DVSwitch voice works just fine on C4FM but it's not allowed on Wires-x
 
I'm seeing this same issue with my DVswitch Mobile setup also. Doing some testing from openspot3 using D-STAR to C4FM I am only heard on the reflector FCS00339 and not heard out over the wires-x repeater (RF side) Using DVswitch Mobile I see the same effect. When I run a hotspot using a Yaesu C4FM radio C4FM to C4FM all works fine. I would love to find a way to get DVswitch working so I'm heard on the RF side of the repeaters. Anyone have any thoughts on how to make this work?

Here is my version output:

/dvswitch.sh version all
dvswitch.sh version 1.6.1
Analog_Bridge version 1.6.4
MMDVM_Bridge version 20210520_V1.6.8 git #3cfcf23
P25Gateway version 20200824
NXDNGateway version 20200824
YSFGateway version 20200908

Thank you Bill NG1P


Re: DVSwitch voice works just fine on C4FM but it's not allowed on Wires-x

Steve N4IRS
 

We are working on YSF. No further info at this time.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of bill richardson <ng1p.bill@...>
Sent: Thursday, November 18, 2021 4:21:34 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] DVSwitch voice works just fine on C4FM but it's not allowed on Wires-x
 
I'm seeing this same issue with my DVswitch Mobile setup also. Doing some testing from openspot3 using D-STAR to C4FM I am only heard on the reflector FCS00339 and not heard out over the wires-x repeater (RF side) Using DVswitch Mobile I see the same effect. When I run a hotspot using a Yaesu C4FM radio C4FM to C4FM all works fine. I would love to find a way to get DVswitch working so I'm heard on the RF side of the repeaters. Anyone have any thoughts on how to make this work?

Here is my version output:

/dvswitch.sh version all
dvswitch.sh version 1.6.1
Analog_Bridge version 1.6.4
MMDVM_Bridge version 20210520_V1.6.8 git #3cfcf23
P25Gateway version 20200824
NXDNGateway version 20200824
YSFGateway version 20200908

Thank you Bill NG1P


Re: DVSwitch voice works just fine on C4FM but it's not allowed on Wires-x

bill richardson
 

I'm seeing this same issue with my DVswitch Mobile setup also. Doing some testing from openspot3 using D-STAR to C4FM I am only heard on the reflector FCS00339 and not heard out over the wires-x repeater (RF side) Using DVswitch Mobile I see the same effect. When I run a hotspot using a Yaesu C4FM radio C4FM to C4FM all works fine. I would love to find a way to get DVswitch working so I'm heard on the RF side of the repeaters. Anyone have any thoughts on how to make this work?

Here is my version output:

/dvswitch.sh version all
dvswitch.sh version 1.6.1
Analog_Bridge version 1.6.4
MMDVM_Bridge version 20210520_V1.6.8 git #3cfcf23
P25Gateway version 20200824
NXDNGateway version 20200824
YSFGateway version 20200908

Thank you Bill NG1P


Re: DMR Time out

Corey Dean N3FE
 

What is the dmr I’d number the device is using?


On Nov 16, 2021, at 3:06 PM, Steve N4IRS <szingman@...> wrote:

 So, to save me a number of useless messages, what else did you already try?

On 11/16/2021 12:17 PM, Joshua Johnson - KC5JMJ wrote:
did that for both 3102 and 3103 and no time out on the ping for both ran them for an hour


Re: Private Calls - DVSwitch Mobile & Server

Steve N4IRS
 

To make a private call dial the target DMR ID#
3112138#

Steve N4IRS

On 11/16/2021 3:55 PM, gareth@... wrote:
Hello, Just wondering is 'Private Calls' a function that works on DVSwitch Server / Mobile client.

I have my Inrico T320 setup connected to DVSwitch Server and then onwards to an IPSC2 Server (aka DMR+ server) and private calls is the one thing i cant seem to get working.

But i may just be doing something wrong so ......

Any advise most welcomed.

73 Gareth GM0WUR


Private Calls - DVSwitch Mobile & Server

gareth@...
 

Hello, Just wondering is 'Private Calls' a function that works on DVSwitch Server / Mobile client.

I have my Inrico T320 setup connected to DVSwitch Server and then onwards to an IPSC2 Server (aka DMR+ server) and private calls is the one thing i cant seem to get working.

But i may just be doing something wrong so ......

Any advise most welcomed.

73 Gareth GM0WUR


Re: DMR Time out

Mike KB8JNM
 

Could it be that you have something activating the tx from whatever it is connected to ?

Also, while I do not remember all the specifics,

but a long time out sometimes applies to certain situations, so you might wait up to a hour and try again.

BM self-care dashboard may tell you something.... or not. Worth a look. Clear/reset connections may help.

On 11/16/2021 12:23 PM, Joshua Johnson - KC5JMJ wrote:
the only thing i have tried was changing server's and ping that's it


Re: DMR Time out

Joshua Johnson - KC5JMJ
 

i'm using the hotspot password yes and verified i do have it correct am i suppose to setup an air security password as well


Re: DMR Time out

Jeff Lehman, N8ACL
 

Double check you are using the correct air security password. it's not your account password for BM, it should be a different one you have to setup... that's the usual culprit for not connecting...

On 11/16/21 12:24, Steve N4IRS wrote:
I don't know of any other reports of the problem. Not much else I can tell you.

On 11/16/2021 12:23 PM, Joshua Johnson - KC5JMJ wrote:
the only thing i have tried was changing server's and ping that's it


Re: DMR Time out

Steve N4IRS
 

I don't know of any other reports of the problem. Not much else I can tell you.

On 11/16/2021 12:23 PM, Joshua Johnson - KC5JMJ wrote:
the only thing i have tried was changing server's and ping that's it


Re: DMR Time out

Joshua Johnson - KC5JMJ
 

the only thing i have tried was changing server's and ping that's it


Re: DMR Time out

Steve N4IRS
 

So, to save me a number of useless messages, what else did you already try?

On 11/16/2021 12:17 PM, Joshua Johnson - KC5JMJ wrote:
did that for both 3102 and 3103 and no time out on the ping for both ran them for an hour


Re: DMR Time out

Joshua Johnson - KC5JMJ
 

did that for both 3102 and 3103 and no time out on the ping for both ran them for an hour


Re: DMR Time out

Steve N4IRS
 

I would log into the server and start a ping to the master. See if you are loosing a connection.

On 11/16/2021 12:12 PM, Joshua Johnson - KC5JMJ wrote:
already have went from 3102 to 3103 still the same


Re: DMR Time out

Joshua Johnson - KC5JMJ
 

already have went from 3102 to 3103 still the same

301 - 320 of 10149