Station call, is this BLANK or should I enter my CALLSIGN?

Steve, see attachment - last screenshot, do I do a Yes or No?

Hi Steve,
DVSwitch username is my callsign, KF1D

From iax.conf:

[KF1D] ;;; The stanza is the "Username" from IAXRpt

type=friend

context=android-iaxrpt

host=dynamic

auth=md5

secret=*****;;; The "Password" from IAXRpt

disallow=all

allow=ulaw

transfer=no

calltokenoptional=0.0.0.0/0.0.0.0

requirecalltoken=no

From extensions.conf:

[android-iaxrpt] ;;; Stanza is the context from iax.conf

exten => 53450,1,Answer ;;; The "Node" from IAXRpt is 1998

exten => 53450,n,Playback,rpt/node

exten => 53450,n,Playback,digits/1

exten => 53450,n,Playback,digits/9

exten => 53450,n,Playback,digits/9

exten => 53450,n,Playback,digits/8

exten => 53450,n,Set(KF1D(num)=0)

exten => 53450,n,Rpt,53450|P|${KF1D(name)} ;;; The "CallerID" from IAXRpt

Thanks,
Bryan, KF1D

Hi Steve,
Thanks for your reply.  Yes, all those values, including the one that you show as 1998, have my node number written instead.  The same is true for the node values in the iax.conf file.  But still, I get the voice saying "Node 1998" when I connect.  I think it's actually working fine, it's just strange that it's saying the default node number.

Hello Steve, that's perfect timing, downloaded latest HAMVOIP image this afternoon, installed it, got it working perfectly including Echolink, and for RF also working, I entered details as you suggested using the attached screenshot and radio kicked in, the only thing is that LED light on the Box from G7RPG no longer changes colour, when on stand-by (Blue), Rx (Red) and Tx (Green), stays permanently on Blue, but I can Rx & Tx OK.

I'll print off your most recent instructions and do it next.

Thanks, John  

I'll do that Steve, and of course keep you updated, after the fresh install, I'll try and do a screen recording so you can see exactly what's going on if that helps, I'll be in touch and thanks again!!

John

Hello,
I can successfully connect the DVSwitch app on my android phone to my Allstarlink node.  However, when it connects, the voice says "Node 1998".  Is this normal?
In the extensions.conf and iax.conf files I changed all the instances where 1998 occurs to my node number.

Also, in my Allstarlink Node information page, it shows no relevant information when I am connected, just "NOCID".  Again, is this to be expected?
Do I have an incorrect setting somewhere.

Thanks,
Bryan, KF1D

Just restored from the original SD card supplied by G7RPG and the menu is the same as before (attached), I haven't run or installed anything yet.

With my current configuration allstar and echolink bridge working perfectly.

Happy to reinstall fresh image from HAMVOIP but I really don't know if RF will work, I've taken a picture (attached) and it appears radio is connected via a USB sound card?

Happy to give it a go as I have plenty of backups to revert back to.

Sorry to give you all this grief!

John

Thats correct Steve, I've attached a screenshot of my menu items, let me restore from the backup again and I'll double-check and let you know

Hi Steve, tried everything you suggested but getting same issue, after running option 3 then firsttime.sh get a message "node configuration will be run after reboot" but after reboot nothing in menu for node configuration. RF and Echolink Bridge still work for allstar, just can't access allstar via DVSwitch Mobile.

I can't see a new stanza created either, so I've manually entered the one you pasted and it tried to connect but errors with "Failure code: (3) Invalid Node number"

I have Allstar and DVSwitch working perfecty on another Raspberry PI running Raspbian (I installed latest image from Allstar first, then manually installed DVSwitch) but without RF, which I was hoping to get (RF) working on HAMVOIP box.

I don't mind using allstar via Echolink or RF, and at least I have DVSwitch for DMR, P25 etc on same box now.

Many thanks, John