Date   

Re: Completely Disable TG10 parrot

Steve N4IRS
 

What shows in your Gateway log when you key up on TG10? If I remember correctly keying on a unknown TG may disconnect the current TG. I will have to test to make sure.

Steve N4IRS

On 3/31/2020 12:06 PM, davek wrote:
Hey Guys
What is the correct process for disabling the parrot logic? i uninstalled the package, and commented out the address in the p25gateway file, but TG10 keyups are still disconnecting the currently connected TG.


Completely Disable TG10 parrot

davek
 

Hey Guys
What is the correct process for disabling the parrot logic? i uninstalled the package, and commented out the address in the p25gateway file, but TG10 keyups are still disconnecting the currently connected TG.


Re: Bang Head Here (mine, not yours)

kb3cs
 

not only is libcurl4 already installed, but there also is a libcurl3 installed:
libcurl3-gnutls/eoan,now 7.65.3-1ubuntu3 amd64 [installed]
gave your suggestion a whirl. here's what happened:
$ sudo dpkg -i asl-asterisk_1.01-20180226-6_i386.deb
Selecting previously unselected package asl-asterisk:i386.
(Reading database ... 522744 files and directories currently installed.)
Preparing to unpack asl-asterisk_1.01-20180226-6_i386.deb ...
Unpacking asl-asterisk:i386 (1.01-20180226-6) ...
dpkg: dependency problems prevent configuration of asl-asterisk:i386:
asl-asterisk:i386 depends on libcurl3.
asl-asterisk:i386 depends on libgsm1.
asl-asterisk:i386 depends on libidn11.
asl-asterisk:i386 depends on libiksemel3.
asl-asterisk:i386 depends on libncurses5.
asl-asterisk:i386 depends on libnewt0.52.
asl-asterisk:i386 depends on libpopt0.
asl-asterisk:i386 depends on libspeex1.

dpkg: error processing package asl-asterisk:i386 (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
asl-asterisk:i386
and when trying the similar but more appropriate install matching my architecture:
$ sudo dpkg -i asl-asterisk_1.01-20180226-6_amd64.deb
(Reading database ... 523031 files and directories currently installed.)
Preparing to unpack asl-asterisk_1.01-20180226-6_amd64.deb ...
Unpacking asl-asterisk (1.01-20180226-6) over (1.01-20180226-6) ...
dpkg: dependency problems prevent configuration of asl-asterisk:
asl-asterisk depends on libcurl3; however:
Package libcurl3 is not installed.
asl-asterisk depends on libiksemel3; however:
Package libiksemel3 is not installed.

dpkg: error processing package asl-asterisk (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
asl-asterisk
more verbosity, but the same result as previously reported with output from 'apt'


Re: Average DMR VS YSF audio level

 


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Skyler Fennell <electricity440@...>
Sent: Monday, March 30, 2020 1:38:33 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Average DMR VS YSF audio level
 
Using two AB’s back to back, can you preserve radio ID/ callsign metadata? 

On Fri, Mar 27, 2020 at 1:35 AM Ernie Gm7kbk <erniepratt@...> wrote:
Dmr radios are usually  louder than C4fm Radios. Turn mic gain down on Dmr and up on C4fm.

I have tried this and it works Dmr MB to AB to AB to MB Ysf. You can alter the audio on one AB.

 


Re: Average DMR VS YSF audio level

Skyler Fennell
 

Using two AB’s back to back, can you preserve radio ID/ callsign metadata? 

On Fri, Mar 27, 2020 at 1:35 AM Ernie Gm7kbk <erniepratt@...> wrote:
Dmr radios are usually  louder than C4fm Radios. Turn mic gain down on Dmr and up on C4fm.

I have tried this and it works Dmr MB to AB to AB to MB Ysf. You can alter the audio on one AB.

 


Re: UDP Address issues

Pete Fierro <overthetop52@...>
 

Thanks to Steve as well..73 KD2ARB


On Sun, Mar 29, 2020 at 12:09, Pete Fierro via Groups.Io
<overthetop52@...> wrote:
JJ

  That did it!!!!Thanks so much&73 very greatful!

Pete
KD2ARB


On Sun, Mar 29, 2020 at 11:54, JJ Cummings
<cummingsj@...> wrote:
The commands that Steve gave you only help find the problem, and when you issued the command it shows that MMDVM_Bridge is indeed already running and listening on that port...  so now you need to kill that process or stop the service.

sudo systemctl stop mmdvm_bridge.service

if that doesn't work

sudo kill 563

(if you are logged in as root you can omit the sudo)


On Sun, Mar 29, 2020 at 9:46 AM Pete Fierro via Groups.Io <overthetop52=yahoo.com@groups.io> wrote:
  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Re: UDP Address issues

Pete Fierro <overthetop52@...>
 

JJ

  That did it!!!!Thanks so much&73 very greatful!

Pete
KD2ARB


On Sun, Mar 29, 2020 at 11:54, JJ Cummings
<cummingsj@...> wrote:
The commands that Steve gave you only help find the problem, and when you issued the command it shows that MMDVM_Bridge is indeed already running and listening on that port...  so now you need to kill that process or stop the service.

sudo systemctl stop mmdvm_bridge.service

if that doesn't work

sudo kill 563

(if you are logged in as root you can omit the sudo)


On Sun, Mar 29, 2020 at 9:46 AM Pete Fierro via Groups.Io <overthetop52=yahoo.com@groups.io> wrote:
  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Re: UDP Address issues

JJ Cummings
 

The commands that Steve gave you only help find the problem, and when you issued the command it shows that MMDVM_Bridge is indeed already running and listening on that port...  so now you need to kill that process or stop the service.

sudo systemctl stop mmdvm_bridge.service

if that doesn't work

sudo kill 563

(if you are logged in as root you can omit the sudo)


On Sun, Mar 29, 2020 at 9:46 AM Pete Fierro via Groups.Io <overthetop52=yahoo.com@groups.io> wrote:
  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Re: UDP Address issues

Pete Fierro <overthetop52@...>
 

  Hi Steve

  Ok did like you said&the problem is still there.Here is the results of the commands you gave me

 
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar 29 11:32:46 2020 from 10.0.0.28
root@repeater:~# ps ax | grep MMDVM_Bridge
  563 ?        Ssl    0:09 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
 4751 pts/0    S+     0:00 grep MMDVM_Bridge
root@repeater:~# netstat -unap | grep 31103
udp        0      0 0.0.0.0:31103           0.0.0.0:*                           563/MMDVM_Bridge


root@repeater:~#


   I did notice a different local ip address 10.0.0.28?

Thanks
Pete
KD2ARB



On Saturday, March 28, 2020, 9:48:01 PM EDT, Steve N4IRS <szingman@...> wrote:


If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





Re: preparing to edit DVSwitch.ini

kb3cs
 

right. so i'm wide awake at 5:30am local time and easy to irritate. that's my failing of the moment.

how about a nice yes/no question, then ..  the seeming incongruous DMR-type settings in the DSTAR "Partner" stanza means the DSTAR traffic leaving the partner acquires the specified Tags or Labels?    yes or no.


Re: preparing to edit DVSwitch.ini

kb3cs
 

eh?

yes, i'm not an idiot, thank you. i see the word "export" three times. is that like shipping peanuts to Thailand?!
that's an "export".

if it's not too much trouble, try being helpful.


Re: UDP Address issues

Steve N4IRS
 

If I were to guess, I would say another copy of MB is running. Try this BEFORE starting MB:
ps ax | grep MMDVM_Bridge
netstat -unap | grep 31103

73, Steve N4IRS

On 3/28/20 9:42 PM, Pete Fierro via Groups.Io wrote:
   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB





UDP Address issues

Pete Fierro <overthetop52@...>
 

   Hi

    Running the DV switch&initializing everything only to find this when I run   ./MMDVM_Bridge MMDVM_Bridge.ini

DMR, Opening INI file: DVSwitch.ini
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] TXPort -> 31100
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] RXPort -> 31103
M: 2020-03-29 01:37:41.294 DMR, Setting [DMR] Slot -> 2
E: 2020-03-29 01:37:41.295 Cannot bind the UDP address, err: 98
F: 2020-03-29 01:37:41.295 DMR, Can not open listener port 31103

    Any reason for this error?Here is analog bridge.ini

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Minimum time in MS for hang delay (0-10000)


DV switch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
Slot = 2                        ; Export slot


  The directions given makes no indication changing ports at all.Any ideas?Thanks

Pete
KD2ARB




Re: preparing to edit DVSwitch.ini

Steve N4IRS
 

ExportTG = 9 ; Which TG to export
Slot = 2 ; Export slot

too cute by .5

On 3/28/20 7:10 PM, kb3cs wrote:
i'm at the planning to edit DVSwitch.ini stage and while reviewing the prototype file, i observe the following:
; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 31100 ; Port to send AMBE TLV frames to (export)
RXPort = 31103 ; Port to listen on (import)
Slot = 2 ; Export slot

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 32100 ; Port to send AMBE TLV frames to (export)
RXPort = 32103 ; Port to listen on (import)
FallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 9 ; Which TG to export
Slot = 2 ; Export slot
it does not seem right to me to have a TG number in the DSTAR stanza.
would someone kindly explain?
thanks!

- 67 (base 11) -


preparing to edit DVSwitch.ini

kb3cs
 

i'm at the planning to edit DVSwitch.ini stage and while reviewing the prototype file, i observe the following:
; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 31100 ; Port to send AMBE TLV frames to (export)
RXPort = 31103 ; Port to listen on (import)
Slot = 2 ; Export slot

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export)
TXPort = 32100 ; Port to send AMBE TLV frames to (export)
RXPort = 32103 ; Port to listen on (import)
FallbackID = 1234567 ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 9 ; Which TG to export
Slot = 2 ; Export slot
it does not seem right to me to have a TG number in the DSTAR stanza.
would someone kindly explain?
thanks!

- 67 (base 11) -


testing ThumbDV and AMBEserver with AMBEtest4

kb3cs
 

the ThumbDV does not like 230400 baud, so the running the test looks like this:
$ python2 AMBEtest4.py -v -n -s /dev/ttyUSB0
the '-n' parameter changes the baud rate to 460800.

to test an AMBEserver (see OpenDV repo -- DummyRepeater/DV3000), first apply this patch:
$ git diff
diff --git a/scripts/AMBEtest4.py b/scripts/AMBEtest4.py
index abd16cb..792fff6 100755
--- a/scripts/AMBEtest4.py
+++ b/scripts/AMBEtest4.py
@@ -180,7 +180,7 @@ def main(argv):
else:
_sock = socket.socket(socket.AF_INET,socket.SOCK_DGRAM)
_sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
- _sock.bind(('', UDP_PORT))
+# _sock.bind(('', UDP_PORT))
port = _sock

print '*********************'
AMBEtest4 can't be a client if it is acting like a server and trying to bind to the port. you get "address already in use" because the port has been bound already by AMBEserver.

the AMBEserver test looks like this:
$ python2 AMBEtest4.py -v -i 127.0.0.1
- 27 (base 33) -


Re: ircddbgateway install command line only

kb3cs
 

just built and installed https://github.com/g4klx/ircDDBGateway on a Ubuntu 19.10 box. it went smoothly.

beware the file debian/ircddbgatewayd.ircddbgatewayd.service as it has "ExecStart=/usr/sbin/ircddbgatewayd" and the daemon gets installed in /usr/bin.

there also is "User=opendv" which means the user account need to be created manually, since the install scripts do not create the user or edit the line if you want to run the daemon using an existing regular user account instead.

  - 4d (base 15) -


Re: Bang Head Here (mine, not yours)

kb3cs
 

it already is, honest.
see "libcurl4/eoan,now 7.65.3-1ubuntu3 amd64 [installed]" from the list of "libcurl*" i produced and posted in my message.

  - 45 (base 17) -


apt-file and dpkg -L

kb3cs
 

did i manage to miss something important or debtool needed another cmdline parameter or something?
after installing a package from the dvswitch repo, apt-file list <package-name> produces no output (that's unusual)
but at least there's dpkg -L <package-name>
$ apt-file list md380-emu
$ dpkg -L md380-emu
/.
/opt
/opt/md380-emu
/opt/md380-emu/md380-emu
/lib
/lib/systemd
/lib/systemd/system
/lib/systemd/system/md380-emu.service
- 23 (base 35) -


public key is not available: NO_PUBKEY 72147EC1E788D4C3

Daren. 2E0LXY.
 

Hi Guys.

Thanks for your patence in advance ;-)

Newby installing and learning but fell at the firt jump.

Debain 10 on a VPS.

I'm SSH into it and I'm getting so far then seeing...


root@45:~/DVSwitch-System-Builder# ./DVSwitch-System-Builder.sh
--2020-03-28 15:08:16--  http://dvswitch.org/install-dvswitch-repo
Resolving dvswitch.org (dvswitch.org)... 44.103.34.4
Connecting to dvswitch.org (dvswitch.org)|44.103.34.4|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 782
Saving to: ‘install-dvswitch-repo.2’

install-dvswitch-repo.2         100%[====================================================>]     782  --.-KB/s    in 0s

2020-03-28 15:08:16 (61.1 MB/s) - ‘install-dvswitch-repo.2’ saved [782/782]

The Repository file already exists, exiting
Hit:1 http://security.debian.org/debian-security buster/updates InRelease
Hit:2 http://deb.debian.org/debian buster InRelease
Hit:3 http://deb.debian.org/debian buster-updates InRelease
Get:4 http://dvswitch.org/ASL_Repository stretch InRelease [4,806 B]
Hit:5 https://packages.sury.org/php buster InRelease
Err:4 http://dvswitch.org/ASL_Repository stretch InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 72147EC1E788D4C3
Reading package lists... Done
W: GPG error: http://dvswitch.org/ASL_Repository stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 72147EC1E788D4C3
E: The repository 'http://dvswitch.org/ASL_Repository stretch InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.

3781 - 3800 of 9800